基于能量泛函的开口矩形板自由振动特性分析

PDF(952 KB)

振动与冲击 ›› 2017, Vol. 36 ›› Issue (11) : 161-165.

论文

李凯1 ，何书韬1 ，吴国民1，毛艺达2 ，李天匀2

作者信息 +

The free vibration characteristics analysis of rectangular plate with central opening using energy functional method

LI Kai1 HE Shu-tao1 WU Guo-min1 MAO Yi-da2 LI Tian-yun2

Author information +

文章历史 +

摘要

本文基于能量泛函方法，建立了开口矩形板自由振动分析模型。计算了开口矩形板的固有频率和振型函数。在处理开口问题时，利用对称性和反对称性只研究四分之一块板，并将其分割成三个区域，通过位移连续条件建立区域之间的联系，并用梁函数模拟位移场，最终得到整体能量泛函。对其变分后得到广义特征值矩阵方程，求解方程可以求出各阶固有频率。结果对比表明本文方法的准确性，为在方案设计阶段快速分析开口矩形板振动及其相关问题提供了理论基础。

Abstract

This article based on the energy functional method to establish a free vibration analysis model and calculate the natural frequency of rectangular plate with an opening. When considering the opening, only a quarter of the plate is available by using symmetry and antisymmetry conditions，which is divided into three regions. Then find connections between regions through continuity conditions of displacement. Displacement field is simulated by beam functions and get the overall energy function. After that，natural frequencies are obtained by solving dispersion characteristic equations yielding by variational method. The results show that the accuracy of the method by comparison. The method provides theoretical foundation on the issue of vibration of rectangular plate with opening and problem related.

导出引用

李凯1,何书韬1,吴国民1，毛艺达2,李天匀2. 基于能量泛函的开口矩形板自由振动特性分析[J]. 振动与冲击, 2017, 36(11): 161-165

LI Kai1 HE Shu-tao1 WU Guo-min1 MAO Yi-da2 LI Tian-yun2. The free vibration characteristics analysis of rectangular plate with central opening using energy functional method[J]. Journal of Vibration and Shock, 2017, 36(11): 161-165

参考文献

[1] Leissa A W. The free vibration of rectangular plates[J]. Journal of Sound and vibration, 1973, 31(3): 257-293.
[2] 曾子平, 黄田. 任意加筋矩形板的振动分析[J]. 振动与冲击, 1988, 4: 007
ZENG Zi-ping, HUANG Tian. The vibration analysis of random stiffened rectangular plates [J]. Journal of vibration and shock, 1988, 4: 007
[3] Shastry B P, Rao G V. Vibrations of thin rectangular plates with arbitrarily oriented stiffeners[J]. Computers & Structures, 1977, 7(5): 627-629.
[4] 彭林欣. 加肋板自由振动的移动最小二乘无单元分析[J]. 振动与冲击, 2011, 30(6): 67-73.
PENG Lin-xin, Moving-least-square meshless analysis on free vibration behavior of ribbed plates[J]. Journal of vibration and shock, 2011, 30(6): 67-73.
[5] 戈海玉. 计入剪切变形板的自由振动求解方法[J]. 合肥工业大学学报: 自然科学版, 2004, 27(4): 438-441.
GE Hai-yu, Solution of the free vibration of plates allowing for shear deformation[J]. Journal of Hefei University of Technology, 2004, 27(4): 438-441.
[6] 叶开沅, 邓梁波. 四边固支的复合材料层合板的自由振动[J]. 科学通报, 1988, 4: 004.
YE Kai-yuan, DENG Liang-ping. The free vibration of composite laminated Plates with clamped supported boundary[J]. Chinese Science Bulletin, 1988, 4: 004.
[7] 滕兆春, 蒲育. 温度影响下FGM圆环板的面内自由振动分析[J]. 振动与冲击, 2015(09):210-217.
TENG Zhao-chun, PU Yu In-plane free vibration of FGM annular plates considering temperature effect[J]. Journal of vibration and shock, 2015(09):210-217.
[8] Sivasubramonian B, Rao G V, Krishnan A. Free vibration of longitudinally stiffened curved panels with cutout[J]. Journal of Sound and Vibration, 1999, 226(1): 41-55.
[9] Boay C G. Free vibration of laminated composite plates with a central circular hole[J]. Composite structures, 1996, 35(4): 357-368.
[10] Laura P A A, Grossi R. Transverse vibration of a rectangular plate elastically restrained against rotation along three edges and free on the fourth edge[J]. Journal of Sound and Vibration, 1978, 59(3): 355-368.
[11] Huang M, Sakiyama T. Free vibration analysis of rectangular plates with variously-shaped holes[J]. Journal of Sound and Vibration, 1999, 226(4): 769-786.
[12] Paramasivam P. Free vibration of square plates with square openings[J]. Journal of Sound and Vibration, 1973, 30(2): 173-178.
[13] Mundkur G, Bhat R B, Neriya S. Vibration of plates with cut-outs using boundary characteristic orthogonal polynomial functions in the Rayleigh-Ritz method[J]. Journal of Sound and Vibration, 1994, 176(1): 136-144.