[1]. Cooper MG,Fairweather M,Tite JP.On the mechanisms of pressure generation in vented explosions.[J].Combustionand Flame, 1986,65:1-14.
[2]. Ponizy B,Leyer JC.Flame dynamics in a vented vessel connected to a duct:1.Mechanism of vessel-duct interaction [J].Combustion and Flame,1999,116:259-271.
[3]. 师喜林,蒋军成,王志荣等.甲烷-空气预混气体泄爆过程的实验研究[J].中国安全科学学报,2007,17(12):107-110.
Shi Xilin,Jiang Juncheng,Wang Zhirong,et al.Experimental Study on the Venting Process of Methane-air Mixture Explosion[J].China Safety Science Journal,2007,17(2):107-110
[4]. 王博,陈思维.密闭受限空间可燃气体爆炸特性数值模拟研究[J].工业安全与环保,2008,34(2):28-29.
Wang Bo,Chen Siwei.Numerical simulation of explosive characteristics of flammable gas in closed restricted space[J].Industrial Safety and Environmental Protection,2008,34(2):28-29.
[5]. 丁云,丁大玉,汤明钧.非理想爆源爆炸波的数值计算.[J].爆炸与冲击,1995,15(4):289-299.
Ding Yun,Ding Dayu,Tang Mingjun.Numerical calculation of blast waves from non-ideal explosion sources[J].Explosion and Shock Waves,1995,15(4):289-299.
[6]. 胡俊,浦以康,万士昕等.柱形容器开口泄爆过程中压力发展特性的实验研究[J].爆炸与冲击,2001,21(1):48-52.
HU Jun,PU Yi-kang,WAN Shi-xin,et al.Ex perimental investig ations of pressure development during explosion vent from cylindrical vessels[J].Explosion and Shock Waves,2001,21(1):48-52.
[7]. 高康华,王明洋,程志军等.泄爆板开启规律及对室内爆燃压力的影响[J].深圳大学学报理工版2011,28(6):529-533
GAO Kang-hua,WANG Ming-yang,CHENG Zhi-jun,et al.Opening rules of vent panels and its effect on interior deflagration pressure.Journal Of Shenzhen University Science And Engineering.2011,28(6):529-533
[8]. 何建,肖玉凤,陈振勇等.空爆载荷作用下固支矩形钢板的塑性极限变形[J].爆炸与冲击,2001,21(1):48-52
HE Jian,XIAO Yu-feng,CHEN Zhen-yong,et al.Plastic lm i ited deform ation analysis of the clamped rectangular steel plate subjected to air non-contact explosion[J].Explosion and Shock Waves,2001,21(1):48-52
[9]. 韩永利,陈龙珠.利用塑性铰线理论求解墙体抗爆能力[J]工程抗震与加固改造,2009,31(6):108-112
Solution Method for Anti-blast Ability of the Wall Based on Yield Line Theory Han Yong-li , Chen Long-zhu[J] .Earthquake Resistant Engineering and Retrofitting,2009,31(6):108-112
[10]. R.B.Schubak,M.D.Olson and D.L.Anderson,Rigid-plastic modeling of blast-loaded stiffened plate-part I:one way stiffened plate[J].Int..J.Mech. Sci.1993,35:289-306
[11]. R.B.Schubak,M.D.Olson and D.L.Anderson.Rigid-plastic modeling of blast-loaded stiffened plate-part Ⅱ:patial and fixity,rate effects and two way stiffened plate[J].Int.J.Mech.Sci.1993,35:307-324
[12]. 张涛,刘土光,周晶晶等,低速冲击载荷下加筋板弹塑动力响应分析[J].应用力学学报2004,21(4):28-33
Zhang Tao,Liu Tuguang,Zhou Jingjing,Luo,et al.Elasto-Plastic Dynamic Response of Stiffened Plates Under Low Velocity Impact Load[J]Chinese Journal of Applied Mechanics2004,21(4)28-33
[13]. 吴桂英,秦冬祺,杨桂通.冲击载荷作用下弹塑性板的反常动力响应研究[J].爆炸与冲击,2003,23(5):420-424[J]
WU Gui-ying,QIN Dong-qi,YANG Gui-tong.A study on anomalous response of elasto-plastic plates under impulsive[J] loadingExplosion and Shock Waves,1995,15(4):289-299.
[14]. Houlston R.Finite Strip.Analysis of Plates and Stiffened Plates subjected to Air-blast Load[J].Comput and Struct,1989,32:99-106
[15]. GB 50038-2005,人民防空地下室设计规范[S].
GB 50038-2005,Code for design of civil air defense basement[S].