具有褶皱薄弱段的正弦波纹梁吸能性能研究

PDF(1843 KB)

振动与冲击 ›› 2017, Vol. 36 ›› Issue (17) : 248-254.

论文

具有褶皱薄弱段的正弦波纹梁吸能性能研究

周华志 1 ，王志瑾 1 ，韩微 1 ，江彬彬 1

作者信息 +

Study of the energy absorption capability of sine waved beam with folded trigger geometry

ZHOU Huazhi 1 WANG Zhijin 1 HAN Wei 1 Jiang Binbin 1

Author information +

文章历史 +

摘要

薄弱环节的设置对波纹梁吸能性能的影响很大，好的薄弱环节可以降低波纹梁的冲击过载，从而降低结构传递给乘员的过载，并使波纹梁产生稳定的渐进压溃，以吸收更多的能量。提出了褶皱薄弱环节的概念，并对带有褶皱薄弱环节的波纹梁吸能性能进行了研究。首先，对具有弧形薄弱段的波纹梁进行了有限元仿真，验证了仿真分析方法的正确性。在此基础上，建立了带有褶皱薄弱段的正弦波纹梁的有限元模型，对波纹梁几何参数对其吸能性能、坠毁冲击时的最大加速度的影响进行了研究。研究发现：褶皱薄弱环节能够有效降低波纹梁的最大冲击载荷，且对波纹梁吸能性能的影响不大。以上研究结果对波纹梁在吸能结构中的应用具有一定的指导意义。

Abstract

The trigger geometry has a great influence on the energy absorption property of waved beams. Reasonable design of trigger mechanism can reduce the impact load of waved beams, thus lead to the reducing of overload passed to the crews from the structure; and make the waved beam destroyed steadily and gradually, which means more energy absorption. The folded trigger geometry of waved beams is introduced and the energy absorption properties of waved beams with folded trigger geometry are studied. First, the FEM model of waved beams with arc trigger geometry is set up and the simulation method is proved to be correct. Then the FEM models of sine waved beam with folded trigger geometry are set up and the effects of geometric characteristics on the energy absorbing property, the maximum acceleration when suffering crash impact of the waved beam are studied. The peak impact load of waved beam can be effectively reduced by using the folded trigger geometry, and the energy absorption ability is almost unaffected. The results got can provide a reference in the application of the waved beams.

导出引用

周华志 1,王志瑾 1,韩微 1,江彬彬 1 . 具有褶皱薄弱段的正弦波纹梁吸能性能研究[J]. 振动与冲击, 2017, 36(17): 248-254

ZHOU Huazhi 1 WANG Zhijin 1 HAN Wei 1 Jiang Binbin 1. Study of the energy absorption capability of sine waved beam with folded trigger geometry[J]. Journal of Vibration and Shock, 2017, 36(17): 248-254

参考文献

[1] LAVOIE J A, MORTON J. Design and application of a quasistatic crush test fixture for investigating scale effects in energy absorbing composite plates[R]. NASA Contractor Report 4526, Washington, D.C: National Aeronautics and Space Administration, 1993.
[2] Bark L W, Yaniv G. Cost-effective production of helicopter energy-absorbing subfloor structures with advanced thermoplastic composites.[C]// The American Helicopter Society 49th Annual Forum, St. Louis: American Helicopter Society International, 1993: 519-529.
[3] AIAA. Simulating Composites Crush and Crash Events Using Abaqus[R]// AIAA, 50th Aiaa/asme/asce/ahs/ asc Structures, Structural Dynamics and Materials Conference, California: AIAA, 2009: 1-12.
[4] G. M. Nagel, D. P. Thambiratnam. A numerical study on the impact response and energy absorption of tapered thin-walled tubes[J]. International Journal of Mechanical Sciences, 2004, 46(2): 201-216.
[5] S. Santosa,J. Banhart,T. Wierzbicki. Experimental and numerical analyses of bending of foam-filled sections[J]. Acta Mechanica, 2001, 148(1): 199-213.
[6] TAN X C, CHEN X G. Modelling energy absorption in textile composite cellular structures[C]// AIAA, 49th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference., Illinois: AIAA, 2008: 1-12.
[7] 倪先平,王永亮,荚淑萍,等. 直升机机身下部复合材料典型结构耐坠特性研究[J]. 复合材料学报, 2003, 20(4): 51-57.
Ni Xianping, Wang Yongliang, Jia Shuping, et.al. Analysis of crash impact behaviour of typical composite components of helicopter bottom structure[J]. ACTA MATERIAE COMPOSITAE SINICA, 2003, 20(4): 51-57. (in Chinese)
[8] 印春伟,徐建,童明波. 复合材料的应用对波纹梁吸能能力的改进分析[J]. 江苏航空, 2012, S1: 130-132.
Yin Chunwei, Xu Jian, Tong Mingbo. Analysis of the improvement of energy absroption capability of waved beams with the application of composite materials[J]. Jiangsu Aviation, 2012, S1: 130-132. (in Chinese)
[9] Weiyu Zhou,James Craig,Sathya Hanagud. Crashworthy behavior of graphite/epoxy composite sine wave webs[C]// SDMC Aiaa/Asme/Asce/Ahs/ Asc Structures, 32nd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, Reston: AIAA, 1991: 1618-1626.
[10] AIAA. A method of predicting the energy-absorption capability of composite subfloor beams[J]. Journal of the American Helicopter Society, 1987, 34(2): 63-67.
[11] 刘豫,李巧,宋艳华. 大尺寸复合材料RTM波纹梁设计优化[J]. 航空工程进展, 2014, (4): 541-546.
Liu Yu, Li Qiao, Song YanHua. Optimal design of composite RTM waved-beams with large size[J]. ADVANCES IN AERONAUTICAL SCIENCE AND ENGINEERING, 2014, 4: 541-546. (in Chinese)
[12] 孟祥吉,燕瑛,罗海波, 等. 复合材料波纹梁冲击试验与数值模拟[J]. 复合材料学报, 2015, 32(1): 196-203.
Meng XiangJi, Yan Ying, Luo Haibo, et.al. Impact tests and numerical simulation of composite waved-beam[J]. Acta Materiae Compositae Sinica, 2015, 32(1): 196-203. (in Chinese)
[13] 冯振宇,袁鹏,邹田春,等. 不同波纹梁结构吸能特性仿真分析[J]. 机械科学与技术, 2014, 33(6): 948-952.
Feng Zhenyu, Yuan Peng, Zhou Chuntian, et.al. Simulation analysis of energy absorption characteristics for different waved beams[J]. Mechanical Science and Technology for Aerospace Engineering, 2014, 33(6): 948-952. (in Chinese)
[14] 卢致龙, 王新峰. 基于Hashin准则的直升机复合材料波纹梁耐撞性分析[J]. 直升机技术, 2015, 1: 25-38.
Lu Zhilong, Wang Xinfeng. Criteria crashworthness analyses of helicopter composite waved beams based on Hashin[J]. HELICOPTER TECHNIQUE, 2015, 1: 25-28. (in Chinese)
[15] 卢致龙, 常成. 直升机复合材料波纹梁结构抗坠毁设计技术研究[J]. 直升机技术, 2015,3: 14-19.
Lu Zhilong, Chang Cheng. Study of helicopter composite wave beam structure anti-crash design technology[J]. HELICOPTER TECHNIQUE, 2015, 3: 14-19. (in Chinese).
[16] 郑建强,向锦武,罗漳平,等. 民机机身耐撞性设计的波纹板布局[J]. 航空学报, 2010, 31(7): 1396-1402.
Zheng Jianqiang Xiang Jinwu, Luo Zhangping, et.al. Crashworthiness layout of civil aircraft using waved-plate for energy absorption[J].\ACTA AERONAUTICA ET ASTRONAUTICA SINICA, 2010, 31(7): 1396-1402. (in Chinese)
[17] 刘瑞同,王鑫伟,荚淑萍. 碳纤维-环氧树脂波纹梁吸能能力的试验研究[J]. 航空学报, 2002, 23(1): 59-61.
Liu Yuitong, Wang Xinwei, Jia Shuping. Experimental study on energy absorption of carbon-epoxy waved beams[J]. ACTA AERONAUTICA ET ASTRO- NAUTICA SINICA, 2002, 23(1): 59-61. (in Chinese)
[18] 龚俊杰, 王鑫伟. 薄弱环节对复合材料波纹梁吸能能力的影响[J]. 材料工程, 2006, 2006(5): 28-31.
Gong Junjie, Wang Xinwei. Effect of trigger geometry on energy absorption of composite waved beams[J]. Journal of Materials Engineering, 2006, 5: 28-31. (in Chinese)
[19] 龚俊杰, 王鑫伟. 复合材料波纹梁吸能能力的数值模拟[J]. 航空学报, 2005, 26(3): 298-302.
Gong Junjie, Wang Xinwei. Numerical simulation of energy absorption capability of composite waved beams[J]. ACTA AERONAUTICA ET ASTRO- NAUTICA SINICA, 2005, 26(3): 298-302. (in Chinese)
[20] 龚俊杰, 王鑫伟. 复合材料波纹梁盒段耐撞性的数值模拟[J]. 应用力学学报, 2007, 24(1): 165-168.
Gong Junjie, Wang Xinwei. Numerical simulation to crashworthness of composite corrugated board boxes[J]. CHINESE JOURNAL OF APPLIED MECHANICS, 2007, 24(1): 165-168. (in Chinese)