基于直串扭振系统动力学响应通解的结构参数优化

PDF(1586 KB)

振动与冲击 ›› 2017, Vol. 36 ›› Issue (18) : 164-169.

论文

王勇勤1 秦楠1 刘志芳2 严兴春1 罗远新1 雷刚3

作者信息 +

Structural Parameter Optimization Based on the General Solution of Dynamic Response of Series Torsional Vibration System

Wang Yong-qin1, Qin nan1, Liu Zhi-fang2, Yan Xing-chun1, Luo yuan-xin1

Author information +

文章历史 +

摘要

机械传动系统的动力学特性直接影响设备本身的安全和产品质量，针对机械主传动系统扭矩放大倍数过大时主要依靠经验调整传动零部件结构尺寸的问题，推导了直串扭振系统双边阶跃加载的动力学响应通解模型。以某轧钢厂的原始数据为基础，将解析结果与Matlab/Simulink框图解进行了对比验证，结果证明二者具有完全的一致性，以此为基础，对该轧机的直串传动系统进行结构参数优化研究，优化结果表明通过优化某部件的刚度可以显著降低最大扭矩放大倍数，提高传动系统的安全性。

Abstract

The dynamic characteristics of mechanical drive system have a direct impact on the safety of the equipment and quality of products. A general solution model for the dynamic response system of straight string torsional vibration system was derived to solve the problem that the structure size of transmission parts is adjusted by experience, when the mechanical torque amplification of mechanical drive system is too large. Based on a rolling mill the raw data, the analytical results were used to compare with the block diagram of Matlab / Simulink. The compared results show that they are consistent completely. On the basis of the proposed model, the structure parameters optimization of the rolling mill was applied to solve the problem of the large torque amplification factor of the steel plant. The optimization results show that the maximum torque multiple can be greatly reduced by changing the stiffness of a component, and the safety of the transmission system can be also improved.

导出引用

王勇勤1 秦楠1 刘志芳2 严兴春1 罗远新1 雷刚3. 基于直串扭振系统动力学响应通解的结构参数优化[J]. 振动与冲击, 2017, 36(18): 164-169

Wang Yong-qin1, Qin nan1, Liu Zhi-fang2, Yan Xing-chun1, Luo yuan-xin1. Structural Parameter Optimization Based on the General Solution of Dynamic Response of Series Torsional Vibration System[J]. Journal of Vibration and Shock, 2017, 36(18): 164-169

参考文献

[1] 邹家祥,徐乐江.冷连轧机系统振动控制[M].北京:冶金工业出版社，1998.
[2] Wang Z, Wang D. Dynamic characteristics of a rolling mill drive system with backlash in rolling slippage[J]. Journal of Materials Processing Technology, 2000, 97(97):69-73.
[3] 张忠健. 间隙冲击对轧机主传动系统扭振影响的研究[D]. 秦皇岛: 燕山大学,2012.
[4] 邹家祥. 轧钢机现代设计理论[M]. 北京: 冶金工业出版社, 1991.
[5] 李崇坚, 段巍. 轧机传动交流调速机电振动控制[M]. 北京: 冶金工业出版社, 2003.
[6] Kim Y, Kim C W, Lee S, et al. Dynamic modeling and numerical analysis of a cold rolling mill[J]. International Journal of Precision Engineering & Manufacturing, 2013, 14(3):407-413.
[7] Makarov Y D, Beloglazov E G, Nedorezov I V, et al. Cold-rolling parameters prior to vibration in a continuous mill[J]. Steel in Translation, 2008, 38(12):1040-1043.
[8] Liu B, Shi P, Hou D X, et al. Rotational speed oscillation measuration of rollingmill torsional vibration[J]. Chinese Journal of Scientific Instrument, 2007, 28(s4):5-7.
[9] 崔超, 臧勇. 轧机主传动系统扭振的有限元法研究[J]. 重型机械, 1999(4):31-34.
   Cui C, Zang Y. Finite Element Research on torsional vibration of a rolling mill's drive system[J]. Heavy Machinery, 1999(4):31-34.
[10] 黄晓刚, 蹇开林. 轧机主传动轴系扭振固有频率计算的有限元法[J]. 机械传动, 2007, 31(6):63-66.
   Huang X G, Jian K L. Calculation of the Torsion Vibration Nature Frequency of Rolling Mill based on the Finite Element Method[J]. Journal of Mechanical Transmission, 2007, 31(6):63-66.
[11] 宋盈盈. 4300中厚板轧机主传动系统的扭振研究[D]. 秦皇岛: 燕山大学, 2015.
[12] 董振华. 4300轧机主传动系统动态特性分析[D]. 秦皇岛: 燕山大学, 2013.
[13] 季泉生, 马敬勋, 郑建起,等. 轧机扭振新微分算子法研究[J]. 冶金设备, 2009(5):34-38.
    Ji Q S, Ma J X, Zheng J Q, et al. Rolling Torsional Vibration Research by a New Differential Operator Method[J]. Metallurgical Equipment, 2009(5):34-38.
[14] Shi P M, Ji-Zhao L I, Jiang J S, et al. Nonlinear Dynamics of Torsional Vibration for Rolling Mill's Main Drive System Under Parametric Excitation[J]. Journal of Iron & Steel Research International, 2013, 20(1):7-12.
[15] 时培明, 夏克伟, 刘彬,等. 多自由度轧机传动系统非线性非主共振扭振特性[J]. 振动与冲击, 2015(12):35-41.
Shi P M, Xia K W, Liu B, et al. Non- main resonance characteristics of nonlinear torsional vibration of rolling mill's multi- degree- of- freedom main drive system[J]. Journal of Vibration and Shock, 2015(12):35-41.