一种利用子结构综合技术的模型修正方法

PDF(1239 KB)

振动与冲击 ›› 2017, Vol. 36 ›› Issue (2) : 147-152.

论文

一种利用子结构综合技术的模型修正方法

王陶1，何欢1,2，闫伟1，陈国平1,2

作者信息 +

Model updating approach based on improved component mode synthesis

WANG Tao1,HE Huan1,2,YAN Wei1,CHEN Guoping1,2

Author information +

文章历史 +

摘要

提出了基于改进自由界面子结构模态综合法的结构模型修正方法。首先给出了一种改进的自由界面子结构模态综合法，该方法通过构造一组与系统低阶模态加权正交的向量集，有效地解决了含有刚体模态时系统剩余柔度矩阵的求解问题。然后利用摄动法对每个子结构进行摄动，并计算灵敏度，通过子结构综合技术得到由摄动量表示的综合系统方程和灵敏度方程，给出了基于灵敏度分析的修正计算方法。本文方法仅需对综合方程进行修正，极大的减缩了待修正问题的计算规模，提高了修正效率。最后，以典型数值算例验证了本文提出方法的有效性。

Abstract

A model updating technique based on improved free-interface component mode synthesis was proposed. By constructing weighted-orthogonal vector sets which have weighted-orthogonal relationship with the lower retained modes,it is easier to obtain the residual flexibility attachment matrix. Each of the components was analyzed by perturbation method. Then the modal equation and the sensitivity equation of whole system were derived by using the component mode synthesis method. The model updating method based on sensitivity analysis proposed in the paper greatly reduces the model scale and improves the computational efficiency. The application of the proposed model updating method in a wing model calculation demonstrates that the presented method is effective.

导出引用

王陶1，何欢1,2，闫伟1，陈国平1,2. 一种利用子结构综合技术的模型修正方法[J]. 振动与冲击, 2017, 36(2): 147-152

WANG Tao1,HE Huan1,2,YAN Wei1,CHEN Guoping1,2. Model updating approach based on improved component mode synthesis[J]. Journal of Vibration and Shock, 2017, 36(2): 147-152

参考文献

[1] C. Chang, T. Y. P. Chang, Q. W. Zhang. Iterative Constrained Optimization Scheme for Model Updating of Long-span Bridges[J]. Proceedings of SPIE, 2000, 3995:334-345.
[2] Teughels,G.D.Roeck, J.A.K.Suykens. Global Optimization by Coupled Minimizers and Its Application to Finite Element Model Updating[J].Computer and Structures, 2003, 81:2337-2351.
[3] 郭勤涛，张令弥，费庆国. 用于确定性计算仿真的响应面法及其试验设计研究[J]. 航空学报，2006,27(1):57-61.
GUO Qin-tao, ZHANG Ling-mi, FEI Qing-guo. Response Surface Method and Its Experimental Design for Deterministic Computer Simulation[J]. Act a Aeronautica et Astronautica Sinica, 2006,27(1):57-61.
[4] Shyy W，Tucker P K. Rsponse Surface and Neural Network Techniques for Rocket Engine Injector Optimization[J]. Journal of Propulsion and Power，2001,17(2):391-411.
[5] Yang G W，Chen D W. Response Surface Technique for Static Aeroelastic Optimization on a High-Aspect-Ratio Wing[J]. Journal of aircraft，2009, 46(4):1444-1450.
[6] W.C. Hurty. Dynamic analysis of structural systems using component modes[J]. AIAA Journal, 1965, 3: 678 – 785.
[7] R. L. Goldman. Vibration analysis by dynamic partitioning[J]. AIAA Journal, 1969, 7: 1152–1154.
[8] R. H. MacNeal. A hybrid method of component mode synthesis[J]. Computers and Structures, 1971, 1: 581–601.
[9] 王毅,朱礼文,王明宇.大型运载火箭动力学关键技术及其进展综述[J].导弹与航天运载技术, 2000,243(1):1–9.
Wang Yi, Zhu Liwen, Wang Ming yu. Summary of Some Key Technologies on Dynamics of Large Launch Vehicle[J]. Missiles and Space Vehicles, 2000,243(1):1–9.
[10] 张美艳.复杂结构的动力重分析方法研究[D].上海:复旦大学,2007.
ZHANG Mei-yan. Study on Dynamic Re-analysis of Complex Structures[D]. SHANG HAI: Fudan University, 2007.
[11] 侯吉林,欧进萍.基于局部模态的约束子结构模型修正法[J].力学学报,2009,41(5):748–756.
Hou Jilin, Ou Jinping. Isolated Substurcture Model Updating Based on Local Mode[J]. Chinese Journal of Theoretical and Applied Mechanics, 2009,41(5):748–756.
[12] Shun Weng, Yong Xia, You-Lin Xu, et al., Substructure based approach to finite element model updating[J]. Computers and Structures, 2011, 89: 772–782.
[13] C. Papadimitriou, D. C. Papadioti, Component mode synthesis techniques for finite element model updating[J]. Computers and Structures, 2013, 126: 15–28.
[14] Hector A. Jensen, Eduardo Millas, Danilo Kusanovic. The Use of Component Mode Synthesis Techniques for Large Finite Element Model Updating Using Dynamic Response Data[R]. Proceedings of the 9th International Conference on Structural Dynamics, EURODYN 2014: 2965-2971.
[15] 刘洋,段忠东,周道成.基于模态综合技术的结构有限元模型修正[J].振动、测试与诊断, 2009,29(3):287–291.
Liu Yang, Duan Zhongdong, Zhou Daocheng. Finite Element Model Updat ing of Complex Structure Using Component Mode Synthesis Technique[J]. Journal of Vibration,Measurement&Diagnosis,2009,29(3): 287–291.
[16] Yang Liu, Yan Li, Dejun Wang, et al. Model Updating of Complex Structures Using the Combinationof Component Mode Synthesis and Kriging Predictor[J]. The Scientific World Journal, 2014(2014): 1-13.
[17] H. He, T. Wang, G. P. Chen, et al., A Real Decoupled Method and Free Interface Component Mode Synthesis Methods for Generally Damped Systems[J]. Journal of Sound and Vibration, 2013, 319: 335– 354.