基于双冲击特征的无转速计混合陶瓷球轴承剥落区宽度估计

康伟,郭瑜,伍星

振动与冲击 ›› 2017, Vol. 36 ›› Issue (20) : 1-5.

PDF(1227 KB)
PDF(1227 KB)
振动与冲击 ›› 2017, Vol. 36 ›› Issue (20) : 1-5.
论文

基于双冲击特征的无转速计混合陶瓷球轴承剥落区宽度估计

  • 康伟,郭瑜,伍星
作者信息 +

Spall Size Estimation of Faulty Hybrid Ceramic Ball Bearing without Speed Meter Based on Double Impulses

  •   Wei Kang    Yu Guo   Xing Wu
Author information +
文章历史 +

摘要

本文首先介绍了一种基于振动信号分析的滚动球轴承剥落区宽度估计的方法,该方法可根据振动信号中的双冲击特征间隔和所在转轴的转速,完成对剥落区宽度的估计,但转速计的安装易受工况条件的限制,对此本文提出了一种基于滚动轴承剥落故障对应冲击特征的无转速计剥落区宽度估计方法,该方法通过振动信号中整周期的冲击次数实现转速估计,结合平均双冲击特征实现了无需转速计的混合陶瓷球轴承的剥落区宽度估计,使该方法更适合于工程应用。试验结果表明,所提方法可对混合陶瓷球轴承剥落区宽度进行有效估计。

Abstract

 A method based on vibration signal is introduced for evaluating the spall size of rolling ball bearings, which utilizes the interval measurement of the double impulses generated by the spall and the rotor speed of the bearing mounted shaft. However, the measurement of the rotor speed is not convenient in some real working conditions. To address this issue, a method based on double impulses is proposed without a speed meter. The rotor-speed estimated by counting the number of impulses in a full rotating cycle of the shaft. By combined the rotor speed and average double-impulses intervals, the new method realizes the spall size estimation without the speed meter. It is appropriate for engineering applications. Experimental results indicate that the proposed method is valid.

关键词

剥落 / 混合陶瓷球轴承 / 双冲击特征

Key words

spall / hybrid ceramic ball bearing / double impulses

引用本文

导出引用
康伟,郭瑜,伍星. 基于双冲击特征的无转速计混合陶瓷球轴承剥落区宽度估计[J]. 振动与冲击, 2017, 36(20): 1-5
Wei Kang Yu Guo Xing Wu . Spall Size Estimation of Faulty Hybrid Ceramic Ball Bearing without Speed Meter Based on Double Impulses[J]. Journal of Vibration and Shock, 2017, 36(20): 1-5

参考文献

[1] 蒋喜,刘宏昭. 混合陶瓷球轴承的选型研究[J]. 西安理工大学学报,2012,28(1):33-38.
JIANG Xi, LIU Hong-chao. Selection of the Hybrid Ceramic Ball Bearings[J]. Journal of Xi’an University of Technology, 2012, 28(1): 33-38.
[2] 蒋喜,吴国庆.陈晓阳. 氮化硅陶瓷球滚动接触疲劳寿命模型[J]. 机械工程学报,2008,44(2):37-42.
JIANG Xi, WU Guo-qing, CHEN Xiao-yang. Tensile Stress Life Model for Rolling Contact Fatigue of Silicon Nitride Ceramic Balls [J] Chinese Journal of Mechanical Engineering, 2008, 44(2):37-42.
[3] Sawalhi.N, Randall.R.B. Vibration Response of Spalled Rolling Element Bearings: Observations, Simulations and Signal Processing Techniques to Track the Spall Size[J]. Mechanical Systems and Signal Processing,2011,25(3):846-870.
[4] Epps.I.K. An investigation into vibrations excited by discrete faults in rolling element bearings[D]. Christchurch:the university of Canterbury.1991.
[5] Sawalhi N;Randall R B,Endo H. The enhancement of fault detection and diagnosis in rolling element bearings using minimum entropy deconvolution combined with spectral kurtosis[J]. Mechanical Systems and Signal Processing,2007,21:2616-2633.
[6] Dowling.N. Application of non-stationary analysis to machinery monitoring, IEEE Paper, No. 0-7803-0946-4/93, 1993, pp. 159–162.
[7] 郭瑜,郑华文,高艳,等. 基于谱峭度的滚动轴承包络分析[J]. 振动、测试与诊断,2011,31(4):517-521.
GUO Yu, ZHEN Hua-wen, GAO Yan,et al. Envelop analysis of rolling bearing based on spectral kurtgoram.  Journal of Vibration Measurement & Diagnosis, 2011, 31(4): 517-521.
[8] Endo.H,Randall.R.B. Enhancement of autoregressive model based gear tooth fault detection technique by the use of minimum entropy deconvolution filter[J]. Mechanical Systems and Signal Processing, 2007, 21: 906-919.
[9] P. J. Dempsey, J. M. Certo, and W. Morales, Current status of hybrid bearing damage detection,NASA/TM—2004-212882, NASA, Cleveland, OH, 2004.
[10] 杨国安. 机械设备故障诊断实用技术丛书 滚动轴承故障诊断实用技术[M]. 出版地:北京:中国石化出版社,2012. 1.
Yang Guo-an. Application of of fault diagnosis for mechanical equipment, practical technology of fault diagnosis for rolling bearing. Publication place: Beijing: China Petrochemical Press, 2012.1

PDF(1227 KB)

Accesses

Citation

Detail

段落导航
相关文章

/