砂轮划片机模态测试中的传感器测点优化研究

孙红春 胥勇

振动与冲击 ›› 2017, Vol. 36 ›› Issue (5) : 187-191.

PDF(1512 KB)
PDF(1512 KB)
振动与冲击 ›› 2017, Vol. 36 ›› Issue (5) : 187-191.
论文

砂轮划片机模态测试中的传感器测点优化研究

  • 孙红春 胥勇
作者信息 +

Optimal placement of sensors for modal testing of dicing saws

  • SUN Hongchun,XU Yong
Author information +
文章历史 +

摘要

针对砂轮划片机这类复杂设备振动模态测试中测试时间长、传感器数目难以确定和测点难以定位的问题,提出了结合有效独立法、QR分解法及模态验证准则、香农扩展定理对砂轮划片机主系统进行测点优化的方法。采用锤击模态测试方法对某一型号的砂轮划片机测点优化前后的模态进行了测试,识别出划片机主系统的振型和模态参数,比较测点优化前后的测试结果,表明测点优化的模态测试实现了将有限个传感器布置在关键的测点位置上并获取最接近真实信息的目的,缩短了测试时间,提高了测试精度,为复杂设备的振动模态测试提供了参考。

Abstract

For problems of too long testing time,the difficulty to determine the number of sensors,and the difficulty to determine measurement points in vibration modal tests of a dicing saw,a method to combine the effective independent method,QR decomposition method,the mode assurance criterion (MAC) and Shannon expansion method was proposed to optimize measuring points for the main system of a dicing saw.The hammering modal test method was adopted to measure modes of a certain type of dicing saw before and after optimizing measurement points.Meanwhile,the vibration modes and modal parameters for the main system of the dicing saw were identified.The modal parameters before and after measuring points optimization were compared.The results showed that the modal tests after test points optimization can realize the target as close as possible to the real information using limited sensors arranged on key measure points,the test time is shortened,and the accuracy of tests is improved.The results provided a reference for the vibration modal testing of complex equipments.

关键词

砂轮划片机 / 振动模态 / 测点优化 / 模态验证准则

Key words

dicing saws / vibration mode / measurement points optimization / mode assurance criterion

引用本文

导出引用
孙红春 胥勇. 砂轮划片机模态测试中的传感器测点优化研究[J]. 振动与冲击, 2017, 36(5): 187-191
SUN Hongchun,XU Yong. Optimal placement of sensors for modal testing of dicing saws[J]. Journal of Vibration and Shock, 2017, 36(5): 187-191

参考文献

[1] Ma Y. Research on performance of diamond blade in dicing saw based on ANSYS method [J], Journal of Advanced Manufacturing Systems, 2012,11(2): 25-33.
[2] 张喜清,项昌乐,刘辉等.基于预试验分析的复杂箱体结构试验模态研究[J].振动与冲击,2011,30(04):109-112+14.
Zhang Xi- qing,Xiang Chang- le,Liu Hui,etc. Modal testing study on a complicated housing structure based on pre- test analysis[J], Journal of Vibration and Shock,2011,30(04): 109-112+14.
[3]  白向贺. 数控机床模态实验的激励点选择和响应测点布置优化[D],武汉:华中科技大学, 2012.
Bai Xiang-he. Nc machine tool modal experiment of point selection and arrangement of measure points in response optimization [D], Wu Han: Huazhong University of Science and Technology, 2012.
[4] 刘伟,高维成,李惠,等.基于有效独立的改进传感器优化布置方法研究[J].振动与冲击,2013,32(06):54-62.
Liu Wei,Gao Wei-cheng,Li Hui,etc.Improved optimal sensor placement methods based on effective independence[J]. Journal of Vibration and Shock,2013,32(06):54-62.
[5] Xiaohe Xu, Youfa Yang, Shuai Li, etc. A  Modified  Optimal Sensor Placement Method Based on the Effective Independence Method[J]. Journal of Information & Computational Science, 2015,12(11): 4457-4464.
[6] Kammer D C. Effects of noise on sensor placement for on-orbit modal identification of large space structures[J]. Journal of dynamic systems, measurement, and control, 1992, 15(2):341-352.
[7] Bai X H, Mao X Y, Li B. Optimal sensor placement for CNC Machine tools[J], Advanced Materials Research, 2012,479-481:1813-1821.
[8] Stubbs N.Park S. Optimal sensor placement for mode shapes via Shannon's sampling theorem. Computer-Aided Civil and Infrastructure Engineering, 1996, 11(06): 411-419.

PDF(1512 KB)

Accesses

Citation

Detail

段落导航
相关文章

/