径向动静压浮环轴承-转子系统稳定性分析

郭 红1, 夏伯乾1, 孙一休1

振动与冲击 ›› 2017, Vol. 36 ›› Issue (5) : 7-11.

PDF(542 KB)
PDF(542 KB)
振动与冲击 ›› 2017, Vol. 36 ›› Issue (5) : 7-11.
论文

径向动静压浮环轴承-转子系统稳定性分析

  • 郭 红1, 夏伯乾1, 孙一休1
作者信息 +

Stability analysis of a journal floating ring hybrid bearing-rotor system

  • GUO Hong,XIA Boqian,SUN Yixiu
Author information +
文章历史 +

摘要

以径向动静压浮环轴承-转子系统为研究对象,计入浮环质量和转子刚度建立了统一的动力学方程,用Routh-Hurwitz准则推导了单质量弹性对称系统的稳定性判据。用有限差分计算了某高速径向动静压浮环轴承的刚度系数和阻尼系数,在此基础上得到了不同浮环质量和转子刚度下动静压浮环轴承-转子系统的稳定性曲线。计算结果表明,浮环质量对系统稳定性影响不大,而随着转子刚度减小,系统失稳转速迅速降低。文章在高速浮环轴承-弹性转子稳定性整体建模和分析方面有较大的参考意义。

Abstract

A unitized dynamic model for a journal floating ring hybrid bearing-rotor system was established considering floating ring mass and rotor stiffness.The stability criterion for the journal floating ring hybrid bearing-rotor system was derived using Routh-Hurwitz method.The dynamic characteristic coefficients of inner and outer films for a high speed floating ring bearing were calculated with the finite difference method under different operation conditions.Further more the variation of the threshold rotating speed of the bearing-rotor system with floating ring mass and rotor stiffness was acquired.The results showed that the threshold rotating speed of the bearing-rotor system decreases slightly with increase in floating ring mass under different eccentricities; at the same time, the threshold rotating speed of the bearing-rotor system increases quickly with increase in rotor stiffness.The results provided a reference for the overall modeling and stability analysis of floating ring hybrid bearing-elastic rotor systems.

关键词

径向浮环轴承 / 转子刚度 / 浮环质量 / 失稳转速

Key words

journal floating ring bearing / rotor stiffness / floating ring mass / threshold rotating speed

引用本文

导出引用
郭 红1, 夏伯乾1, 孙一休1. 径向动静压浮环轴承-转子系统稳定性分析[J]. 振动与冲击, 2017, 36(5): 7-11
GUO Hong,XIA Boqian,SUN Yixiu. Stability analysis of a journal floating ring hybrid bearing-rotor system[J]. Journal of Vibration and Shock, 2017, 36(5): 7-11

参考文献

[1] 马辉, 李辉, 牛和强, 等. 滑动轴承-转子系统油膜失稳参数影响分析[J]. 振动与冲击, 2013, 32(23): 100~104.
   MA Hui, LI Hui, NIU He-qiang, et al. Parametric influence analysis of oil-film instability in a sliding bearing-rotor system[J]. Journal of Vibration and Shock, 2013, 32(23): 100~104.
[2] Guo Hong, Lai Xinmin, Cen Shaoqi. Theoretical and Experimental Study on Dynamic Coefficients and Stability for a Hydrostatic/Hydrodynamic Conical Bearing[J], ASME, Journal of Tribology, 2009, 131(4): 041701~041707.
[3] Mattew D. Brouwer, Farshid Sadeghi, Craig Lancaster, et al. Whirl and Friction Characteristics of High Speed Floating Ring and Ball Bearing Turbochargers[J]. Journal of Tribology, 2013, 135(10): 041102-1~041102-9
[4] Hai-lun Zhou, Guo-quan Feng, Gui-huo Luo, et al. The dynamic characteristics of a rotor supported on ball bearings with different floating ring squeeze film dampers[J]. Mechanism and Machine Theory, 2014, 80: 200~213
[5] 沈那伟, 焦映厚, 陈照波, 等. 微型燃气轮机浮环轴承动力学参数影响因素研究[J]. 振动工程学报, 2012, 25(6): 714~723.
   SHEN Na-wei, JIAO Ying-hou, CHEN Zhao-bo, et al. Study of impact factor on dynamic parameters of the floating ring bearing for micro gas turbogenerator[J]. Journal of Vibration Engineering, 2012, 25(6): 714~723.
[6] Cheng-Chi Wang, Her-Terng Yau, and Chi-Chang Wang. Chaotic and Subharmonic Motion Analysis of Floating Ring Gas Bearing System by Hybrid Numerical Method[J]. Mathematical Problems in Engineering, 2013, 1~14.
[7] WANG Longkai, BIN Guangfu, LI Xuejun, and ZHANG Xuefeng. Effects of Floating Ring Bearing Manufacturing Tolerance Clearance on the Dynamic Characteristics for Turbocharger[J]. CHINESE JOURNAL OF MECHANICAL ENGINEERING, 2015, 28(3): 530~540.
[8] Panagiotis Koutsovasilis, Nicolas Driot, Daxining Lu, et al. Quantification of sub-synchronous vibrations for turbocharger rotors with full-floating ring bearings[J]. ARCHIVE OF APPLIED MECHANICS, 2015, 85(4): 481~502.
[9] San Andres Luis, Barbarie Vince, Bhattacharya Avijit, et al.  On the effect of thermal energy transport to the performance of (semi) floating ring bearing systems for automotive turbochargers[J]. Journal of Engineering for Gas Turbines and Power, 2012, 134: 102507-1~102507-10
[10] 郭红, 张直明, 岑少起, 等. 径向浮环动静压轴承稳定性研究[J]. 振动与冲击, 2012, 31(17): 17~21.
    Guo Hong, Zhang Zhi-ming, Cen Shao-qi et al. Stability of Journal Floating Ring Hybrid Bearing[J]. Journal of Vibration and Shock, 2012, 31(17): 17~21.
[11] 孙一休, 郭红, 张绍林, 等. 计入浮环质量的浮环动静压轴承稳定性分析[J]. 润滑与密封, 2015, 40(5): 47~51, 63
SUN Yi-xiu, GUO Hong, ZHANG Shao-lin, et al. Stability Analysis of Floating Ring Hybrid Bearing Considering Floating Ring Mass[J]. LUBRICATION ENGINEERING, 2015, 40(5): 47~51, 63
[12] 郭红, 张直明, 张绍林, 等. 径向动压浮环轴承-转子系统多稳定区域研究[J]. 振动与冲击, 2016, 35(2): 168~172.
    Guo Hong, Zhang Zhi-ming, Zhang Shao-lin, et al. Multi stable regions of hydrodynamic floating ring journal bearing-rotor system[J]. Journal of Vibration and Shock, 2016, 35(2): 168~172.

PDF(542 KB)

Accesses

Citation

Detail

段落导航
相关文章

/