基于ABAQUS串列立管碰撞的有限元分析

PDF(1022 KB)

振动与冲击 ›› 2017, Vol. 36 ›› Issue (6) : 196-200.

论文

杨尊儒1,2，白兴兰1,2，谢永和1,2

作者信息 +

Finite element analysis on the collision between serial risers by using ABAQUS software

YANG Zunru1,2,BAI Xinglan1,2,XIE Yonghe1,2

Author information +

文章历史 +

摘要

以两串列立管碰撞为研究对象，运用有限元分析软件ABAQUS，考虑水耦合作用研究串列立管的局部碰撞行为。通过模拟立管碰撞前的静态弯曲和动态碰撞过程，将静态分析的结果导入动态分析步中，从单一因素方面分析碰撞速度、立管夹角、内压对立管碰撞应力的影响，并将考虑水耦合作用和不考虑水耦合作用的应力变化情况进行了对比分析。结果表明：在给定工况下，两立管发生多次碰撞，考虑水耦合作用时，立管碰撞产生的应力较小。在分别考虑和不考虑水耦合时，碰撞速度、夹角、内压对立管应力变化的影响是不同的，初始碰撞产生的应力随碰撞速度的增大而增大，存在某一适当的夹角和内压值，使立管较为安全，可以避免立管遭受撞击而发生破坏，为立管群的排列布置提供参考。

Abstract

The collision between serial risers was studied using the restart analysis of finite element software ABAQUS to consider the coupling effect between the water and risers.In the study,the results of the static bending analysis were input into the dynamic analysis.The collision behavior between adjacent risers was analyzed under the situations with and without considering the riser-water coupling effect and the influences of single factors,such as the velocity,angle,and internal pressure were discussed.The stress responses in the collision process of adjacent risers were obtained.The results show that multiple times of collisions may happen between two serial risers under the given cases,and the stresses with considering the riser-water coupling are smaller than those without considering the coupling.The effects of impact velocity,angles and internal pressure on the stresses are different under the situations with and without considering the coupling.The stresses induced by the first collision increase with the increase of impact velocity.The results show that risers are safer when they are subjected to a certain internal pressure compared to bare risers.When the impact angle is 45 degree,the maximum stress is lower.Therefore,there are proper values of angle and internal pressure for the riser’s safety.The results provide a reference to the arrangement of risers group to avoid collision damage.

导出引用

杨尊儒1,2，白兴兰1,2，谢永和1,2. 基于ABAQUS串列立管碰撞的有限元分析[J]. 振动与冲击, 2017, 36(6): 196-200

YANG Zunru1,2,BAI Xinglan1,2,XIE Yonghe1,2. Finite element analysis on the collision between serial risers by using ABAQUS software[J]. Journal of Vibration and Shock, 2017, 36(6): 196-200

参考文献

[1] 马强,田荣涛.深水立管之间的碰撞过程数值仿真[J].中国工程机械学报,2007, 5(2): 177-181.
MA Qiang, TIAN Rong-tao. Digital collision simulation for deep-water risers [J]. Chinese Journal of Construction Machinery, 2007, 5(2): 177-181.
[2] Bernt J Leria. Probabilistic Analysis and Design in Relation to Riser-Riser collision [C]// Kitakyushu. Japan: IOPEC, 2002: 26-31.
[3] Wilmshurst S R, Chan H H, Ellinas C P. Mott MacDonald Ltd. Local Riser Impact F.E.Model Validation Using Laboratory Impact Tests [R]. IOPEC2001，Stavanger, Norway, June 17-22, 2001: 254-260.
[4] 陈云水, 王德禹. SPAR平台立管相互碰撞的有限元分析[J]. 振动与冲击, 2007, 26(9): 115-119.
CHEN Yun-shui, WANG De-yu. Finite Element Analysis of the Collision of Rises in SPAR Platform [J]. Journal of Vibration and Shock, 2007, 26(9): 115-119.
[5] 阎岩, 张崎, 黄一. 基于张力腿平台的顶张紧式立管碰撞分析[J]. 上海船舶运输科学研究所学报,2012, 35(1): 1-6.
YAN Yan, ZHANG Qi, HUANG Yi. Analysis of Collisions between Top Tension Risers on a Tension Leg Platform[J]. Journal of Shanghai Ship and Shipping Research Institute, 2012, 35(1): 1-6.
[6] 金伟良, 宋剑, 龚顺风. 船舶与海洋平台撞击的荷载模拟[J]. 计算力学学报,2004, 21(1): 26-32.
   JIN Wei-liang, SONG Jian, GONG Shun-feng. Simulation of impact load on ship-platform collision [J]. 2004, 21(1): 26-32.
[7] 江丙云, 孔祥宏, 罗元元. ABAQUS工程实例详解[M].北京：人民邮电出版社，2015.
   JIANG Bing-yun, KONG Xiang-hong, LUO Yuan-yuan. Engineering example explanation of ABAQUS [M]. Beijing: Posts & Telecom Press, 2015.
[8] Hallquist J.O., Goudreau G.L., Benson D.J.. Sliding interfaces with contact-impact in large-scale Lagrangian computation [J]. Computer Methods in Applied Mechanics and Engineering, 1985, 51(1-3): 107-137.
[9] Noh W. F. CEL: A time-dependent two-space-dimensional coupled Eulerian-lagrangian code [C]// Alder B., Fernbach S., Rotenberg M.. Methods in Computational Physics. New York: Academic Press, 1964: 117-179.
[10] 王懿,贾旭, 黄俊, 段梦兰. 基于CEL的船舶抛锚入泥深度分析[J].石油机械, 2014, 42(12): 44-47.
   WANG Yi, JIA Xu, HUANG Jun, DUAN Meng-lan. Analysis of penetration depth of dropped anchor based on CEL [J]. China Petroleum Machinery, 2014, 42(12): 44-47.
[11]吴天龙. 海洋立管相互碰撞问题研究[D]. 兰州理工大学, 2014.
   WU Tian-long. The research of collision for a pair of marine risers [D]. Lanzhou University of Technology, 2014.
[12]Yousun Li, Denby G M.. The“colliding participating mass”: A novel technique to quantify riser collision [C]// OMAE, New Orleans, LA, 2000.
[13] 闫岩. 深水立管碰撞的数值模拟研究[D]. 大连理工大学, 2010.
    YAN Yan. Research on numerical simulation of deep water riser collision [D]. Dalian University of Tecnology, 2010.