大阻尼高比刚度复合材料仪表板结构设计及动态特性分析

PDF(857 KB)

振动与冲击 ›› 2017, Vol. 36 ›› Issue (6) : 212-217.

论文

梁森1 ，张术国 1，梁天锡2，韦利明 2

作者信息 +

Structural design and dynamic characteristics of large damping and high specific stiffness composite panels

LIANG Sen1,ZHANG Shuguo1，LIANG Tianxi2，WEI Liming2

Author information +

文章历史 +

摘要

提出了一种新型五层夹芯复合材料仪表板的设计结构，其中上、下蒙皮和中心层设计成嵌入式共固化多层阻尼复合材料结构，并在上蒙皮和中心层以及在下蒙皮和中心层之间设计成一定厚度的聚甲基丙烯酰亚胺泡沫材料，通过有限元数值模拟对其动力学性能进行研究，并与制作出试件的模态分析实验结果进行对比，表明此种设计结构具有非常高的阻尼和比刚度特性，为轻质精密复合材料仪表板设计理论和制作工艺的进一步研究奠定了坚实的基础。

Abstract

A new type of five-layer sandwich composite panels was presented in detail.The upper and lower skins and center layer were designed as embedded co-cured composite structures with multilayer damping films.Between the upper skin and center layer as well as between the lower skin and the center layer,a layer of polymethacrylimide foam material with a certain thickness was put in.The dynamic performances of the specimen were analysed deeply by using the finite element simulation and experimental modal analysis.By making comparison between the relative results,the conclusion shows that the designed structure has very high damping and specific stiffness characteristics,and will provide a foundation to the design principle and application of light-weight,large-damping and high-precision composite materials instrument panels.

导出引用

梁森1,张术国 1，梁天锡2，韦利明 2. 大阻尼高比刚度复合材料仪表板结构设计及动态特性分析[J]. 振动与冲击, 2017, 36(6): 212-217

LIANG Sen1,ZHANG Shuguo1，LIANG Tianxi2，WEI Liming2 . Structural design and dynamic characteristics of large damping and high specific stiffness composite panels[J]. Journal of Vibration and Shock, 2017, 36(6): 212-217

参考文献

[1] 祁丽霞,段俊法,白雅娟,等.复杂仪表板元件设计序列确定方法研究[J].工程设计学报,2008,05:357-360.
Qi Lixia, Duan Junfa, Bai Yajuan ,et al. Method to ascertain design sequence of components on panel of complex instrument [J].Journal of engineering design,2008,05,357 -360.
[2] 赖盛景,邓克文,李火生.仪表板黏弹阻尼减振设计[J].中国工程物理研究院科技年报, 2005,01: 143-143.
     Lai Shengjing, Deng Kewen, Li Huosheng. The dashboard sticky elastic damping vibration reduction design [J]. Chinese academy of engineering physics science and technology annual report, 2005, 01: 143-143.
[3] 刘天雄,华宏星,陈兆能,等.约束层阻尼板的有限元建模研究[J].机械工程学报,2002,38（4）108-114.
Liu Tianxiong, Hua Hongxing, Chen Zhaoneng, et al. Study on the model of finite element of constrained layer damping plate[J].Chinese Journal of Mechanical Engineering, 2002 ,38(4):109-114.
[4] 郭亚娟,李惠清,孟光,等.粘弹性自由层阻尼管的有限元建模与试验研究[J]. 振动与冲击, 2008，27(5):99-102.
Guo Yajuan,Li Huiqing,Meng Guang, et al. Finite element modeling and experimental research on pipes sticked with viscoelastic free layer damping[J]. JOURNAL OF VIBRATION AND SHOCK, 2008,27（5）:99-102.
[5] 林松,徐超,吴斌.共固化粘弹性复合材料的结构多目标进化优化设计.宇航学报,2010,31(8):1900-1905.
Lin Song,Xu Chao,Wu Bin. Multi-objective evolutionary optimization design of composite structure embedded with cocured viscoelastic layers. Journal of Astronautics, 2010,31(8):1900-1905.
[6] 张忠胜,梁森.嵌入式中温共固化复合材料阻尼结构制作工艺及层间结合性能[J]. 航空学报,2013,08:1972-1979.
Zhang Zhongsheng, Liang Sen. Manufacturing process and interlaminar bonding property of embedded medium-temperature co-cured composite material damping structure[J]. Acta Aeronautica et Astronautica Sinica, 2013, 08:1972-1979.
[7] 梁森,王辉,张忠胜. 嵌入式高温共固化复合材料阻尼结构动力学性能实验研究[J]. 振动与冲击,2013,20:97-101.
LIANG Sen, WANG Hui, ZHANG Zhong-Sheng. Tests for dynamic performance of embedded high-temperature co-cured composite damping structures [J]. Journal of vibration and shock, 2013, 20:97-101.
[8] Sen Liang, Yaoyao Xiu and Hui Wang. A Research on Sound Insulation Characteristics and Processing of the Embedded and Co-cured Composite Damping Structures [J]. Journal of Composite Materials, 2012: 0021998312446182.
[9] 梁森,王辉,修瑶瑶.基于遗传算法的嵌入式共固化穿孔阻尼层复合材料结构优化[J]振动与冲击.2013,32（11）:51-55.
Liang Sen, Wang Hui and Xiu Yao-yao. Based on genetic algorithm   embedded in curing perforation damping layer composite structural optimization [J]. Journal of vibration and shock. Aiaa 2013,32(11) : 51-55.
[10] 梁森,王辉,张忠胜.嵌入式高温共固化复合材料阻尼结构动力学性能实验研究[J]振动与冲击. 2013,32(20):97-101.
Liang Sen, Wang Hui, Zhang Zhong-sheng. Embedded high temperature curing composite damping structure dynamic performance [J]. Journal of vibration and shock.2013,32(20): 97-101.
[11] Sen Liang, Keyao Liang, Lei Luo, et al. Study on Low-velocity Impact of Embedded and Co-cured Composite Damping Panels with Numerical Simulation Method[J]. Composite Structures.2014,107:1-10.
[12] 张洁. 复合材料铺层设计准则的一些理解[J]. 科技创新导报,2013,14:57-58.
Zhang Jie. Composite layer design criteria of some understanding [J]. Science and technology innovation herald, 2013, 14:57-58.
[13] 杨永文. 复合材料层合板及飞机进气道铺层设计与分析[D].哈尔滨工业大学,2009.
Yang Yong-wen. Design and analysis of placement layers for composite laminates and aircraft inlet [D]. Harbin industrial university, 2009.
[14] 侯玉品. 复合材料层合板铺层设计与离散结构选型优化方法研究[D].大连理工大学,2013.
Hou Yu-pin. Optimization Design Methods for Composite Laminate and Structures with Discrete Variables [D]. Dalian technology university, 2013.
[15] 梁森,王常松,张术国,等.大阻尼高刚度复合材料多层夹芯精密仪表板制作工艺[P].山东：CN104015377A,2014-09 -03.
     Liang Sen,Wang Chang-song,Zhang Shu-guo,et al.The production process of large damping and high stiffness composite panel[P].Shan dong: CN104015377A,2014-09 -03.
[16] 张恩天,曲春艳,陈维君. 结构胶粘剂的发展和应用[J].中国材料进展,2009,09:74-78.
ZHANG En-tian, QU Chun-yan ,CHEN Wei-jun. Development and application of structural adhesive [J]. Materials China ,2009,09:74-78.
[17] Peng Mi, Sen Liang. A Research on Loss Factor of Embedded and Co-cured Composite Damping Structure [J]. Emerging Materials and Mechanics Applications.2012,487: 593~597.
[18] 张庆玲,王庆如,李兴无. 航空用钛合金紧固件选材分析[J]. 材料工程,2007,01:11-14.
ZHANG Qing-ling,Wang Qing-ru,Li Xing-wu. Materials Selection Analysis for Titanium Alloy Fasteners in Aviation Industry[J]. Journal of materials engineering, 2007,01:11-14.
[19] Robinson MJ, Kosmatka JB. Embedding viscoelastic damping materials in low-cost VARTM composite structures [J]. SPIE Proceedings Smart Structure and Materials, 2005, 5760: 349~360.
[20] 刘风雷,刘丹,刘健光.复合材料结构用紧固件及机械连接技术[J]. 航空制造技术,2013,01:102-104.
Liu Feng-lei ,Liu Dan, Liu Jian-guang. Fastener and Mechanical Joining Technology for Composites Structure [J]. Aviation manufacturing technology, 2013,01:102-104.