漂浮基空间柔性机械臂在轨捕获碰撞分析

贾庆轩,洪训超,陈 钢,张 龙

振动与冲击 ›› 2018, Vol. 37 ›› Issue (1) : 187-195.

PDF(1361 KB)
PDF(1361 KB)
振动与冲击 ›› 2018, Vol. 37 ›› Issue (1) : 187-195.
论文

漂浮基空间柔性机械臂在轨捕获碰撞分析

  • 贾庆轩,洪训超,陈 钢,张 龙
作者信息 +

Vibration analysis of a free-floating flexible space manipulator in on-orbit capture collision

  • JIA Qingxuan, HONG Xunchao, CHEN Gang, ZHANG Long
Author information +
文章历史 +

摘要

针对漂浮基空间柔性机械臂执行抓捕任务过程中的碰撞问题,提出了一种当机械臂末端与目标物发生碰撞时分析系统响应的方法。首先,运用悬臂梁模型和假设模态法建立了考虑臂杆空间柔性变形时空间柔性机械臂的运动学模型;然后,以赫兹阻尼模型模拟软接触碰撞过程,结合拉格朗日方程建立了系统碰撞动力学方程,并推导了关节处于自由和完全受控两种状态时在末端激励下系统的响应方程;最后,通过数值仿真实验分析了机械臂关节处于特定状态下,在末端与目标物产生碰撞接触时漂浮基空间柔性机械臂的响应。数值仿真结果表明空间柔性机械臂在执行在轨捕获任务时,由于接触碰撞产生的碰撞力可能会很大,关节承受力矩甚至可能超过其物理承受极限,同时由于碰撞冲击产生的臂杆位于运动平面内和垂直于运动平面的柔性变形大小相当,在研究柔性机械臂的碰撞响应时应当同时考虑。

Abstract

Aiming at the capture task performed by a free-floating flexible space manipulator, a method for analyzing the system responses causes by the contact between the end-effector of the space manipulator and the target was proposed. Based on the cantilever beam model and the assumed mode method, a kinematics model of the space manipulator considering its flexible links was established. The Hertz damping model was adopted to simulate the soft contact process and according to the Lagrange equation, a contact dynamics model of the space manipulator was also established. On this basis, the response equations of the system due to the external excitation were deduced with its joints free or completely controlled. Finally, the responses of the space manipulator were analyzed by using the numerical simulation with its joints in special state and its end-effector contacting with the target. The numerical simulation results show that when the manipulator performs the capture task, the impact force may be huge, and the forces suffered by its joints may even exceed its limit. Meanwhile, due to the deformations in the motion plane and perpendicular plane caused by the impact are in the same order of magnitude, the impact responses in both planes should be considered simultaneously.

关键词

空间柔性机械臂 / 悬臂梁 / 假设模态法 / 连续碰撞力模型 / 振动分析

Key words

 flexible space manipulator / cantilever beam / assumed mode method / continuous contact force model / vibration analysis

引用本文

导出引用
贾庆轩,洪训超,陈 钢,张 龙. 漂浮基空间柔性机械臂在轨捕获碰撞分析[J]. 振动与冲击, 2018, 37(1): 187-195
JIA Qingxuan, HONG Xunchao, CHEN Gang, ZHANG Long. Vibration analysis of a free-floating flexible space manipulator in on-orbit capture collision[J]. Journal of Vibration and Shock, 2018, 37(1): 187-195

参考文献

[1] DING Xilun, ZHANG Qixian. A New Dynamic Modeling Method of D Holzer of the Flexible Manipulator [J] .Chinese Journal of Mechanical Engineering 1999, 35 ( 3): 25-28
[2] CONNELLY J D, HUSTONR L . The dynamics of flexible multibody systems-A finite segment approach. 1. Theoretical aspects [J]. Computers and Structures, 1994, 50(2): 255-258.
[3] FATTAH A , ANGLES J. Dynamics of the cooperating flexible-link manipulators-planar case[ J] .Transactions of the Canadian Society for Mechanical Engineering , 1997, 21( 1): 1-17
[4] ATA A A, FARES W F, Sa’Adeh M Y. Dynamic Analysis of a Two-link Flexible Manipulator Subject to Different Sets of Conditions[J]. Procedia Engineering, 2012, 41:1253-1260.
[5] CHEN Wen. Dynamic modeling of multi-link flexible robotic manipulators [J]. Computers and Structures, 2001, 79(2): 133-195
[6] Ş. Yavuz, L. Malgaca, H. Karagülle. Vibration control of a single-link flexible composite manipulator[J]. Composite Structures, 2016, 140:684-691.
[7] KIM H K, CHOI S B, Thompson B S. Compliant control of a two-link flexible manipulator featuring piezoelectric actuators[J]. Mechanism & Machine Theory, 2001, 36(3):411-424.
[8] XU Y, Qiao Y, WANG Z, et al. Modeling and variable structure control of a vehicle flexible manipulator[C]// Intelligent Control and Automation. 2012:3657 - 3662.
[9] FLORES-Abad A, WEI Z, MA O, et al. Optimal Control of Space Robots for Capturing a Tumbling Object with Uncertainties[J]. Journal of Guidance Control & Dynamics, 2014, 37(6):1-4.
[10] CONG P C, ZHANG X. Preimpact configuration analysis of a dual-arm space manipulator with a prismatic joint for capturing an object[J]. Robotica, 2013, 31(31):853-860.
[11] YOSHIDA K, SASHIDA N. Modeling of impact dynamics and impulse minimization for space robots[C]// Ieee/rsj International Conference on Intelligent Robots and Systems '93, IROS. IEEE, 1993:2064 - 2069.
[12] 贾庆轩, 张龙, 陈钢,等. 基于等效质量的太空机械臂多体系统碰撞分析[J]. 宇航学报, 2015, 36(12):1356-1362.
JIA Q X, ZHANG L, CHEN G, et al. Collision Analysis of Space Manipulator Multi-Body System Based on Equivalent Mass[J]. Journal of Astronautics, 2015. (in Chinese).
[13] YOSHIDA K, SASHIDA N, KURAZUME R, et al. Modeling of collision dynamics for space free-floating links with extended generalized inertia tensor[J]. IEEE International Conference on Robotics & Automation Proceedings, 1993, 11(3):410-418.
[14] HUANG P F, XU W, LIANG B, et al. Configuration Control of Space Robots for Impact Minimization[C]// 2006 IEEE International Conference on Robotics and Biomimetics. IEEE Computer Society, 2006:357-362.
[15] LIU S, WU L, LU Z. Impact dynamics and control of a flexible dual-arm space robot capturing an object[J]. Applied Mathematics & Computation, 2007, 185(2):1149-1159.
[16] 董楸煌, 陈力. 柔性空间机械臂捕获卫星过程的碰撞动力学、镇定控制和柔性振动线性二次最优抑制[J]. 空间科学学报, 2014, 34(3):367-376.
DONG Q, LI C. The Impact Dynamics Analysis of Flexible Space Manipulator Capturing a Satellite and Neural Network Calming Motion Control and Vibration Suppression[J]. Journal of Mechanical Engineering, 2014, 50(9). (in Chinese).
[17] 乔兵, 吴晓健. 一种空间柔性机械臂接触动力学仿真的模型降阶方法[J]. 四川大学学报:工程科学版, 2012, 44(4):214-220.
QIAO Bing, WU Xiaojian. A Model Order Reduction Method for Impact-contact Dynamics Simulation of Flexible Space Robotic Manipulator[J]. Sichuan Daxue Xuebao, 2012, 44:214-220. (in Chinese).
[18] HONG X C, JIA Q X, CHEN G, et al. Vibration response analysis of space manipulator considering arm flexibility [C/OL]. The 11th IEEE Conference on Industrial Electronics and Applications (ICIEA 2016) ,(2016-03-20)[2016-04-21]. http://www.ieeeiciea.org/.
[19] 潘冬. 空间柔性机械臂动力学建模分析及在轨抓捕控制[D]. 哈尔滨工业大学, 2014.
PAN Dong. Research on Dynamics Modeling and Capture of Space Flexible Manipulator[D]. Harbin Institute of Technology, 2014. (in Chinese).
[20] 单祖辉. 材料力学[ M] . 北京:高等教育出版社,2009.
DAN Huizu. Mechanics of materials [M]. Higher Education Press, 2009 (in Chinese).
[21] SPONG M W, HUTCHINSON S, VIDYASAGAR M. Robot Dynamics and Control[J]. Control in Robotics & Automation Sensor, 1989, 2(43):88-89.
[22] ZHANG L, JIA Q X, CHEN G, et al. Impact analysis of space manipulator collision with soft environment[C]// Industrial Electronics and Applications (ICIEA), 2014 IEEE 9th Conference on. IEEE, 2014.
[23] 曹建永, 王铁. 基于ANSYS和ADAMS的观光车车架联合仿真[J]. 机械设计与制造, 2012(11):100-102.
CAO Jianyong, WANG Tie. Simulation of Sightseeing Car Frame Joint Based on ANSYS and ADAMS[J]. Machinery Design & Manufacture, 2012(11):100-102. (in Chinese).
[24] 陈海卫, 张秋菊. C语言在ADAMS用户定义子程序中的应用[J]. 机电一体化, 2008, 14(4):39-42.
CHEN Haiwei,ZHANG Qiuju. The Application of the C Programming Language in Writtening User-Written Subroutines in ADAMS[J]. Mechatronics, 2008, 14(4):39-42.(in Chinese).

PDF(1361 KB)

Accesses

Citation

Detail

段落导航
相关文章

/