小型甘蔗收获机切割器振动对切割力的影响

李尚平 1,2,张 彪 1,周敬辉 1,钟家勤 3,杨代云 1,莫瀚宁 1

振动与冲击 ›› 2018, Vol. 37 ›› Issue (1) : 229-235.

PDF(1605 KB)
PDF(1605 KB)
振动与冲击 ›› 2018, Vol. 37 ›› Issue (1) : 229-235.
论文

小型甘蔗收获机切割器振动对切割力的影响

  • 李尚平 1,2,张  彪 1,周敬辉 1,钟家勤 3,杨代云 1,莫瀚宁 1
作者信息 +

 Effect of the vibration of small sugarcane harvester cutters on the cutting force

  • Li Shang-ping 1,2  Zhang Biao 1  Zhou Jing-hui 1  Zhong Jia-qin3   Yang Dai-yun1  Mo Han-ning1
Author information +
文章历史 +

摘要

针对小型甘蔗收获机切割器振动导致破头率高的问题,本文通过设计不平衡质量块构建切割器的激振源,模拟切割器的动不平衡,实现了刀盘的可控振动,并通过力学计算、仿真验证了试验的可行性。通过仿真及物理试验平台砍蔗试验,探究了刀盘振动对切割力,以及切割力对宿根切割质量的影响关系及作用机理。仿真表明,当切割力最大时,轴向切割力约占总切割力的92.6%;试验表明,振动对切割力影响显著,在1.02~1.20mm振幅范围内切割力呈线性上升趋势;轴向切割力与宿根切割质量的相关系数为0.91~0.95,刀盘振动对甘蔗宿根切割质量的影响主要是通过轴向切割力的作用来实现的。

Abstract

Aiming at the small sugarcane harvester cutter's vibration leading to the high broken rate of sugarcane ratoon, unbalance mass blocks were designed to build an excitation source to simulate the cutter's dynamic imbalance and to control the cutter's vibration. The feasibility of the tests was verified through mechanical calculations and simulations. To explore the effect of cutter's vibration on the cutting force and the effect of cutting force on the ratoon cutting quality, both simulations and physical tests were carried out. The simulation results show the axial cutting force accounts for about 92.6% of the total cutting force when the force reaches maximum. The test results show that the vibration has a significant influence on the cutting force and the cutting force shows a linear upward trend in the scope of the amplitude of 1.02-1.20mm. The correlation coefficient between the axial cutting force and ratoon cutting quality is from 0.91 to 0.95. When the amplitude changes, the axial cutting force is the main influential factor on the ratoon cutting quality of sugarcanes.
 

关键词

甘蔗收获机 / 振动 / 切割力 / 宿根切割质量

Key words

sugarcane harvester / vibration / cutting force / ratoon cutting quality

引用本文

导出引用
李尚平 1,2,张 彪 1,周敬辉 1,钟家勤 3,杨代云 1,莫瀚宁 1. 小型甘蔗收获机切割器振动对切割力的影响[J]. 振动与冲击, 2018, 37(1): 229-235
Li Shang-ping 1,2 Zhang Biao 1 Zhou Jing-hui 1 Zhong Jia-qin3 Yang Dai-yun1.  Effect of the vibration of small sugarcane harvester cutters on the cutting force[J]. Journal of Vibration and Shock, 2018, 37(1): 229-235

参考文献

[1] 程绍明,王  俊,等. 我国整杆式甘蔗联合收割机的现状和问题[J]. 现代农业科技,2013, 20: 193-194.
Cheng Shao-ming, Wang Jun, et al. Study on Status and Problems of Whole Stalk Sugarcane Combine Harvester in China[J]. Modern Agricultural Science and Technology,2013,20: 193-194.
[2] 区颖刚. 我国甘蔗生产机械化发展战略研究[In]:2011年甘蔗产业发展论坛暨中国作物学会甘蔗专业委员会14次学术讨论会论文集(广东).广东:广州甘蔗糖业研究所,2011: 220-229.
Ou Ying-gang. Study on the Development Strategy of Sugarcane Mechanization[In]:Conference Proceedings of 2011 Sugarcane Industry Development  BBS(Guangdong). Guangdong: Guangzhou Institute of Sugarcane Industury, 2011: 220-229.
[3] 曾志强,区颖刚,等. 切断式甘蔗联合收获机的试验与分析[J]. 农机化研究,2012, 09: 164-166.
Zeng Zhi-qiang, Ou Ying-gang, et al. Experiment and Analysis on Cut Type Sugarcane Harvester[J]. Journal of Agricultural Mechanization Research, 2012, 09: 164-166.
[4] Gupta CP, Oduori M F. Design of the Revolving Knife-Type Sugarcane Basecutter[J]. American Society of Agriculture Engineer, 1992, 35(6): 1747-1752.
[5] J.razavi, M.kardany, A.masoumi. Effects of some cutting blades and plant factors on specific cutting energy of sugarcane stalk.IIth CIGR, Hosted by the Canadian Society for Bioengineering(CSBE/SCGAB)Québec City, Canada June 13-17, 2010.
[6] 卿上乐,区颖刚,刘庆庭. 土壤支撑下甘蔗茎秆的内力和变形[J]. 华中农业大学学报,2005, 10(36): 109-113.
Qing Shang-le, Ou Ying-gang, Liu Qing-ting. Intenral Forces and Distortions of Sugarcane Stalks in the Conditions of Soil Support[J]. Journal of Huazhong Agricultural, 2005, 10(36): 109-113.
[7] 刘庆庭,区颖刚,卿上乐,等. 光刃刀片切割甘蔗茎秆时根茬破坏力学分析[J]. 农业机械学报,2007, 38(9): 51-55.
Liu Qing-ting, Ou Ying-gang, Qing Shang-le, et al. Mechanics Analysis on Stubble Damage of Sugarcane Stalk during Cutting by Smooth-edge Blade[J]. Transactions of the Chinese Society for Agricultural Machinery, 2007, 38(9): 51-55.
[8] 王鹏,魏道高,等. 轴承间隙对甘蔗切割器系统振动特性影响研究[J]. 农业装备与车辆工程,2013, 07: 6-9+13.
Wang Peng, Wei Dao-gao, et al. Research on the Influence of Bearing Clearance on Vibration Characteristics of Sugarcane Cutter[J]. Agricultural Equipment & Vehicle Engineering, 2013, 07: 6-9+13.
[9] 向家伟,杨连发,李尚平. 小型甘蔗收获机切割器试验研究[J]. 农业工程学报,2007, 11: 158-163.
Xiang Jia-wei, Yang Lian-fa, Li Shang-ping. Experimental investigation of the basecutter for minitype sugarcane harvester[J]. Transactions of the Chinese Society of Agricultural Engineering, 2007, 11: 158-163.
[10] 刘鸿文,等. 材料力学(第四版)[M],北京:高等教育出版社,2004.1.
Liu Hong-wen, et al. Mechanics of Materials (Fourth Edition), Beijing: Higher Education Press, 2004.1.
[11] 杨立军,张  勇. 叠加原理在刚体静力学中的应用[J]. 陕西科技大学学报,2005, 02: 70-72.
Yang Li-jun, Zhang Yong. Application of Superposition Principle in Rigid Body Statics[J]. Journal of Shaanxi University of Science & Technology, 2005, 02: 70-72.
[12] 张洪才,等. ANSYS 14.0理论分析与工程应用实例[M]. 北京:机械工业出版社,2012: 10.
Zhang Hong-cai, et al. ANSYS 14.0 Theoretical Analysis and Engineering Application Examples[M]. Beijing: Mechanical Industry Press, 2012: 10.
[13] 朱来东,廉小亲,江远志. 小波变换在信号降噪中的应用及MATLAB实现[J]. 北京工商大学学报(自然科学版), 2009, 02: 46-49.
Zhu Lai-dong, Lian Xiao-qin, Jiang Yuan-zhi. Application of Wavelet Transform in Signal De-noising and Realization with MATLAB[J]. Journal of Beijing Technology and Business University(Natural Science Edition), 2009, 02: 46-49.
[14] 章浙涛,朱建军,等. 小波包多阈值去噪法及其在形变分析中的应用[J]. 测绘学报,2014, 01: 13-20.
Zhang Zhe-tao, Zhu Jian-jun, et al. Multi-threshold Wavelet Packet De-noising Method and Its Application in Deformation Analysis[J]. Acta Geodaetica et Cartographica Sinica, 2014, 01: 13-20.
[15] 麻芳兰,何玉林,李尚平,等. 甘蔗收获机切割性能的模糊综合评价与优化[J]. 农业机械学报,2006, 37(12): 79-84.
Ma Fang-lan, He Yu-lin, Li Shang=ping, et al. Analysis on Fuzzy Comprehensive Evaluation and Optimization of Cutting Performance of Sugarcane Harvester[J]. Transactions of the Chinese Society for Agricultural Machinery, 2006, 37(12): 79-84.

PDF(1605 KB)

Accesses

Citation

Detail

段落导航
相关文章

/