基于窄带解调的行星齿轮箱故障特征提取

PDF(1692 KB)

振动与冲击 ›› 2018, Vol. 37 ›› Issue (10) : 123-128.

论文

基于窄带解调的行星齿轮箱故障特征提取

赵磊，郭瑜，伍星

作者信息 +

Fault feature extraction of planetary gear box based on the narrowband demodulation#br#

ZHAO Lei，GUO Yu，WU Xing

Author information +

文章历史 +

摘要

行星齿轮箱由于振动传递路径的时变性导致行星齿轮箱振动信号频谱具有复杂的调制边带，其包含了齿轮的故障信息。结合行星齿轮箱振动分离信号的同步平均和窄带解调法，提出了针对行星齿轮箱的窄带解调方法。对行星齿轮箱振动信号加窗截取，根据行星齿轮箱齿轮啮合齿序特征，将加窗截取信号拼接重构单个齿轮的振动分离信号，克服传递路径时变性的影响；对振动分离信号进行时域同步平均，提高信噪比；最后，对平均后的信号进行窄带解调，提取行星齿轮箱齿轮故障特征和故障位置。通过行星齿轮箱故障实验分析，验证该方法能有效的提取行星齿轮箱故障特征。

Abstract

Planetary gearbox ,due to the timevarying property of the vibration transmission path, leads to the complex modulation sidebands in its vibration signal spectrum, which contains abundant fault informations of the gearbox. A special narrowband demodulation method for the planetary gearbox was put forward, combining the synchronous average and narrowband demodulation or the vibration separation signals of the planetary gearbox. The window interception of the vibration signal was made, and according to the teeth order characteristics of the gear meshing of the planetary gearbox, the vibration signal of a single gear was reconstructed by the splicing of the window interception signals, to overcome the influence of the variation of the transmission path. The time domain synchronous averaging of the vibration separation signals, was utilized to improve the signaltonoise ratio. The narrowband demodulation for the average vibration separation signals, was carried out, and finally, the fault characteristics and fault location of the planetary gear box were extracted. Through the experimental analysis, it was verified that the method can effectively extract planetary gearbox fault characteristics.

导出引用

赵磊，郭瑜，伍星. 基于窄带解调的行星齿轮箱故障特征提取[J]. 振动与冲击, 2018, 37(10): 123-128

ZHAO Lei，GUO Yu，WU Xing. Fault feature extraction of planetary gear box based on the narrowband demodulation#br#[J]. Journal of Vibration and Shock, 2018, 37(10): 123-128

参考文献

[1] Lawrence Yip.Analysis and Modeling of Planetary Gearbox Vibration Data for Early Fault Detection[D].Toronto. Mechanical and Industrial Engineering University of Toronto. 2011.
[2] 雷亚国,林京,何正嘉.基于多传感器信息融合的行星齿轮箱故障诊断[J].振动与冲击.2010,29(S):216-218.
Lei Yaguo,Lin Jing,He Zhengjia.Fault Diagnosis of Planetary Gearboxes Based on Multi-sensor Information Fusion[J]. Journal of vibration and shock.2010,29(S):216-218.
[3] 冯志鹏,赵镭镭,褚福磊. 行星齿轮箱齿轮局部故障振动频谱特征[J]. 中国电机工程学报,2013,05:119-127+19.
Feng Zhipeng,Zhao Lei Lei,Chu Fu-lei.Vibration Spectral Characteristics of Localized Gear Fault of Planetary Gearboxes[J].China CSEE, 2013,05: 119-127 + 19.
[4] 刘红星,林京,屈梁生,等.信号时域平均处理中的若干问题探讨[J]. 振动工程学报. 1997,10(04): 743-747.
Liu Hongxing，Lin Jing，Qu Liangsheng. Discussion on signal averaging in time domain[J].Journal of Vibration Engineering. 1997,10(04): 743-747.
[5] Meisingseth A. Demodulation techniques in gearbox diagnostics[C]. Andreas Meisingseth,2012.
[6] Wang W.Early detection of gear tooth cracking using the resonance demodulation technique[J].Mechanical Systems and Signal Processing,2001,15( 5) :887-903.
[7] P. D. McFadden. A technique for calculating the time domain averages of the vibration of the individual planet gears and the sun gear in an epicyclic gearbox[J]. Journal of Sound and vibration, 1991, 144(1): 163-172.
[8] Samuel,Conroy J K,Pines D J.Planetary transmission diagnostics[J]. NASA CR, 2004, 213068.
[9] David G.Lewicki, Kelsen E. LaBerge ,Ryan T. Ehinger. Planetary Gearbox Fault Detection Using Vibration Separation Techniques[J]. NASA. 2011: 1-14
[10] 冯志鹏,褚福磊.行星齿轮箱故障诊断的频率解调分析方法[J]. 中国电机工程学报. 2013(11): 112-117.
Feng Zhi-peng,Chu Fu-lei.Frequency Demodulation Analysis Method for Fault Diagnosis of Planetary Gearboxes [J]. Proceedings of the CSEE, 2013,33(11):112-117.
[11] R.B.Randall.Vibration Based Condition Monitoring[M]. Australia: A John Wiley and Sons, Ltd., Publication, 2010.
[12] 郭瑜,高艳,郑华文.旋转机械阶比跟踪中的阶比交叠噪声消除[J].振动与冲击,2008,27( 10) : 98 - 102.
Guo Yu,GaoYan,Zheng Hua-wen. Order-crossing noise removal in order tracking analysis of rotating machinery[J]. Journal of Vibration and Shock,2008,27( 10): 98 -102.
[13] 李辉,郑海起,杨绍普.基于幅值和相位解调分析的齿轮箱启动过程故障诊断[J].振动与冲击.2008,27(2):8-11.
Li Hui,Zheng Haiqi,Yang Shaopu.Gear fault diagnosis based on amplitude and phase demodulation during run-up[J]. Journal of vibration and shock. 2008,27(2):8-11.
[14] 刘倩楠,郭瑜,伍星.基于频移及谱线编辑的齿轮故障窄带解调分析方法[J].振动与冲击.2015.34(16):38-42.
Liu Qiannan,Guo Yu,Wu Xing.Gear fault analysis based on narrowband demodulation with frequency shift and spectrum edit [J].Journal of vibration and shock. 2015.34(16):38-42.