在平面立铣刀轴向施加纵向超声振动,对超声铣削C/C复合材料的铣削力进行解析。考虑C/C复合材料的层状结构模型和立铣刀的几何模型,以及铣削加工中铣刀旋转为主运动的运动特征,运用斜角切削理论、等效平面和二维正交切削圆的理论对超声振动辅助铣削C/C复合材料的铣削力进行建模,获得了超声铣削中的等效平面角的变化规律。并通过数值模拟与实验讨论了超声辅助铣削加工C/C复合材料的实验时随刀具旋转角度变化的铣削力特征。实验结果表明:铣削力的理论曲线的波形变化趋势与实际测得的铣削力的趋势一致。
Abstract
The longitudinal ultrasonic vibration was applied in the axial direction of a flat end milling cutter, and the milling force of C/C composites during the ultrasonic milling process was analyzed. Considering the layered structure model of the C/C composite material and the geometrical model of the end mill, as well as the motion characteristics of the milling cutter rotation in milling process and based on the theory of bevel cutting,the milling force in the ultrasonic vibration assisted milling of C/C composite material was modeled in accordance with the theory of equivalent plane and twodimensional orthogonal cutting circle. The variation of the equivalent plane angle in ultrasonic milling was investigated. The milling force characteristics of the ultrasonic assisted milling of C/C composites in the experiments along with the change of cutter rotation angle were discussed by numerical simulations and experiments. The results show that the predicted milling forces are identical to the experimental milling forces in magnitude.
关键词
超声铣削 /
铣削力 /
斜角切削 /
等效平面
{{custom_keyword}} /
Key words
Ultrasonic milling /
Cutting force /
Oblique cutting /
Equivalent plane
{{custom_keyword}} /
{{custom_sec.title}}
{{custom_sec.title}}
{{custom_sec.content}}
参考文献
[1] Sorrentino L, Turchetta S. Cutting forces in milling of carbon fibre reinforced plastics[J]. International Journal of Manufacturing Engineering, 2014, 2014(1):195-196.
[2] Wang S B, Geng L, Zhang Y F, et al. Cutting force prediction for five-axis ball-end milling considering cutter vibrations and run-out[J]. International Journal of Mechanical Sciences, 2015, 96-97:206-215.
[3] Tsai C L. Analysis and prediction of cutting forces in end milling by means of a geometrical model[J]. International Journal of Advanced Manufacturing Technology, 2007, 31(9-10):888-896.
[4] 戚厚军, 张大卫, 蔡玉俊,等. 摆线轮轮廓高速周铣工艺系统的弹性铣削力预测方法[J]. 机械工程学报, 2009, 45(9):164-172.
QI Hou-jun, ZHANG Da-wei, CAI Yu-jun, et al. Modeling methodology of flexible milling force for cycloid on high speed peripheral milling process system[J]. Journal of Mechanical Engineering,2009,45(9):164-172.
[5] Qi H, Tian Y, Zhang D. Machining forces prediction for peripheral milling of low-rigidity component with curved geometry[J]. International Journal of Advanced Manufacturing Technology, 2013, 64(9-12):1599-1610.
[6] Yang Z C, Zhang D H, Huang X C, et al. The simulation of cutting force and temperature field in turning of inconel 718[J]. Key Engineering Materials, 2010, 458:149-154.
[7] 李炳林, 胡于进, 王学林,等. 基于斜角切削理论的立铣切削力预测研究[J]. 中国机械工程, 2011, 22(19):2283-2288.
LI Bing-lin, HU Yu-jin, WANG Xue-lin, et al. Cutting force prediction based on oblique cutting theory in end milling[J]. China Mechanical Engineering, 2011,22(19):2283-2288.
[8] 李英松, 夏平, 何东璠. 基于傅立叶级数的立铣刀铣削力模型[J]. 机械设计与制造, 2012(7): 256- 258.
LI Ying-song, XIA Ping, HE Dong-fan. Milling force model for end milling based on the fourier series[J]. Machinery Design & Manufacture, 2012(7):256- 258.
[9] Yiğit Karpat, Onur Bahtiyar, Burak Değer. Milling Force Modelling of Multidirectional Carbon Fiber Reinforced Polymer Laminates[J]. Procedia Cirp, 2012, 1(1):460-465.
[10] Ojolo S J, Agunsoye O J, Adesina O, et al. Force modelling in high speed end-milling of Super Alloys[J]. Journal of Mechanical Engineering & Automation, 2015, 5(1):56-66.
[11] 罗智文, 赵文祥, 焦黎,等. 基于斜角切削的曲线端铣切削力建模[J]. 机械工程学报, 2016, 52(9): 184-192.
LUO Zhi-wen, ZHAO Wen-xiang, JIAO Li, et al. Cutting force modeling in end milling of curved geometries based on oblique cutting process[J]. Journal of Mechanical Engineering, 2016, 52(9):184-192.
[12] Wu Q Y, He L, Xiao H, et al. Milling force analysis and modeling of super-alloy GH2132[C]// Materials Science Forum, 2016.
{{custom_fnGroup.title_cn}}
脚注
{{custom_fn.content}}