基于细观结构表征的编织-嵌槽型金属橡胶本构模型

PDF(1355 KB)

振动与冲击 ›› 2018, Vol. 37 ›› Issue (12) : 75-82.

论文

李拓，白鸿柏，路纯红，曹凤利

作者信息 +

Constitutive models of knitted dapped metal rubber based on microstructure characterization

LI Tuo，BAI Hongbai，LU Chunhong，CAO Fengli

Author information +

文章历史 +

摘要

通过对编织-嵌槽型金属橡胶的细观结构进行简化，将其等效成了线圈以串并联形式连接而成的组合系统。依据刚度-变形曲线的特点，将构件的压缩变形过程分为了线性阶段、非线性阶段及高次非线性阶段，建立了对应的本构模型。该模型包含了丝径、弹性模量、丝材密度等基本工艺参数，从理论上解释了编织-嵌槽型金属橡胶力学特性的物理本质。通过试验数据与理论计算结果的对比对模型进行了验证，结果表明该模型能够较好地表征编织-嵌槽型金属橡胶的力学行为。为材料力学特性的进一步研究以及指导材料的设计提供了理论依据。

Abstract

By simplifying the microstructure, knitteddapped metal rubber material was equivalent to a composite system assembled by loops in seriesparallel form. According to the characteristics of the stiffnessdeformation curve, the compression deformation process was divided into three phases including linear phase, nonlinear phase, and highorder nonlinear phase. Constitutive models were established and mathematical expressions for stiffness and compressive load were deduced. The models containing the basic technics parameters, such as metal wire diameter, elastic modulus, wire density could explain the physical nature of mechanical characteristics of knitteddapped metal rubber. The models were validated by the comparison of experimental data and calculated results. The result showed that the models were valuable for the analysis of the mechanical behaviors of knitted dapped metal rubber. It provides theoretical support for further studying mechanical characteristics and guiding design of the material.

导出引用

李拓，白鸿柏，路纯红，曹凤利. 基于细观结构表征的编织-嵌槽型金属橡胶本构模型[J]. 振动与冲击, 2018, 37(12): 75-82

LI Tuo，BAI Hongbai，LU Chunhong，CAO Fengli. Constitutive models of knitted dapped metal rubber based on microstructure characterization[J]. Journal of Vibration and Shock, 2018, 37(12): 75-82

参考文献

[1] 切戈达耶夫（李中郢译）.金属橡胶构件的设计[M].北京:国防工业出版社,2000.
Chegodayev.(Translate by Li Zhong-ying). Design of Metal Rubber Component[M]. Beijing: National Defense Industry Press,2000.
[2] 李玉龙,白鸿柏,何忠波,等.基于FFT多谐波平衡法的金属橡胶隔振系统振动特性分析[J].振动与冲击,2014, 33 (15):98-101.
Li Yu-long, Bai Hong-bai, He Zhong-bo, et al. Dynamic response characteristics of a metal-rubber vibration isolation system based on FFT multi-harmonic balance method[J]. Journal of Vibration and Shock,2014,33(15):98-101.
[3] 李玉龙,白鸿柏,何忠波,等.金属橡胶消极减振系统复杂响应特性研究[J].振动与冲击,2016, 35 (4):87-92.
Li Yu-long, Bai Hong-bai, He Zhong-bo, et al. Complex response characteristics of a passive metal-rubber vibration isolation system[J]. Journal of Vibration and Shock,2016,35(4):87- 92.
[4] 李玉龙,白鸿柏,何忠波.柔性基础上金属橡胶隔振系统混沌响应研究[J].振动与冲击,2015, 34(14):100-105.
Li Yu-long, Bai Hong-bai, He Zhong-bo. Chaotic response of metal rubber vibration isolation system on flexible foundation[J]. Journal of Vibration and Shock,2015,34(14): 100-105.
[5] Zhang B, Lang Z.Q., Billings S.A., et al. System identification methods for metal rubber devices[J]. Mechanical Systems and Signal Processing, 2013,39:207-226.
[6] Jiang Hongyuan, Hao Degang, Xia Yuhong, et al. A damping characteristics calculation method of metal dry friction isolators[J]. Journal of Beijing Institute of Technology, 2008, 17 (2):173-177.
[7] 李宇燕,王炜.不同结构参数金属橡胶材料的本构关系[J].西安工业大学学报,2013,33(4):293- 296.
Li Yu-yan, Wang Wei. Constitutive Relationship of Metallic Rubbers with Various Structural Paramers[J]. Journal of Xi'an Technological University,2013,33(4):293-296.
[8] 李宇燕, 黄协清.密度和形状因子变化时金属橡胶的本构关系[J].航空学报,2008，29 (4): 1084-1090.
Li Yu-yan, Huang Xie-qing. Constitutive Relation for Metal-rubber with Different Density and Shape Factor[J]. Acta Aeronautica et Astronautica Sinica, 2008,29(4):1084-1090.
[9] Li Yuyan, Huang Xieqing and Mao Wenxiong. A theoretical model and experimental investigation of a nonlinear constitutive equation for elastic porous metal rubbers[J]. Mechanics of Composite Materials,2005, 41 (4):303-312.
[10] Li Yuyan, Li Xiaoling and Huang Xieqing. Research on factors influencing the mechanical properties of metallic rubber[J]. Mechanics of Composite Materials, 2011, 47 (5):571-580.
[11] 曹凤利, 白鸿柏,任国权,等. 基于变长度悬臂梁的金属橡胶材料本构模型[J].机械工程学报, 2012, 48 (24):61-66.
Cao Feng-li, Bai Hong-bai, Ren Guo-quan, et al. Constitutive Model of Metal Rubber Material Based on Curved Cantilever Beam of Variable Length[J]. Journal of Mechanical Engineering, 2012,48(24):61-66.
[12] Cao Fengli, Bai Hongbai and Li Dongwei, et al. A Constitutive Model of Metal Rubber for Hysteresis Characteristics Based on a Meso-Mechanical Method[J]. Rare Metal Materials and Engineering, 2016, 45 (1):1-6.
[13] 李拓,白鸿柏,路纯红,等.编织-嵌槽型金属橡胶的压缩性能研究[J].振动与冲击,2014,33(13): 142-147.
Li Tuo, Bai Hong-bai, Lu Chun-hong. Compression property of knitted-dapped metal rubber[J]. Journal of Vibration and Shock,2014, 33(13):142-147.
[14] 龙海如.针织学[M].北京:中国纺织出版社, 2008.
Long Hai-ru. Knitting Technology[M].Beijing: China Textile＆Apparel Press,2008.
[15] 张英会,刘辉航,王德成.弹簧手册[M].北京:机械工业出版社,2008.
Zhang Ying-hui, Liu Hui-hang, Wang De-cheng. Manual of Spring[M]. Beijing: China Machinery Industry Press,2008.
[16] 范钦珊.工程力学教程[M].北京：高等教育出版社,2002.
Fan Qinshan. Engineering Mechanics[M]. Beijing: Higher Education Press，2002.