基于VMD滤波和极值点包络阶次的滚动轴承故障诊断

PDF(1393 KB)

振动与冲击 ›› 2018, Vol. 37 ›› Issue (14) : 102-107.

论文

武英杰¹，辛红伟1，王建国1，王晓龙2

作者信息 +

Rolling bearing fault diagnosis based on the variational mode decomposition filtering and extreme point envelope order

WU Yingjie¹，XIN Hongwei¹，WANG Jianguo¹，WANG Xiaolong²

Author information +

文章历史 +

摘要

针对变速工况滚动轴承故障诊断问题，提出一种基于变分模态分解（VMD）滤波和极值点包络阶次的特征提取方法。首先，对变速工况下的振动信号进行VMD滤波以提高信噪比，同时抑制转速波动引起的振动趋势项；搜寻滤波后信号极大值，并进行端点延拓，通过极值点插值拟合求得信号包络线；利用计算阶比跟踪技术将时域包络线转变到角度域，进而得到信号的包络阶次谱；仿真与实际数据测试表明，基于极值点的包络阶次方法可以有效提取调幅信号中的调制阶次，并且VMD滤波可以使得故障特征阶次更加凸显，易于故障识别，该方法为变速工况下的滚动轴承故障

Abstract

To diagnose rolling bearing failures under variable speed working conditions, a method based on the variational mode decomposition (VMD) filtering and extreme envelope order was put forward. The vibration signal collected in variable speed conditions was filtered by the VMD in order to improve its signaltonoise ratio and inhibit the vibration tendency term caused by speed variation. Searching the maximum of the filtered signal and extending its endpoints, an envelope signal was gained by the process of spline fitting. The time domain envelope signal was then transformed to the angle domain by using the computed order tracking technology, and then an envelope order spectrum was obtained by FFT. The simulation and experiment tests show that the proposed method can effectively extract the modulation order from modulated signal, and the VMD filtering can make fault features more highlight, which is conducive for fault identification. The proposed method provides a reference to the rolling bearing fault diagnosis under variable speed conditions.

导出引用

武英杰1，辛红伟1，王建国1，王晓龙2. 基于VMD滤波和极值点包络阶次的滚动轴承故障诊断[J]. 振动与冲击, 2018, 37(14): 102-107

WU Yingjie1，XIN Hongwei1，WANG Jianguo1，WANG Xiaolong2. Rolling bearing fault diagnosis based on the variational mode decomposition filtering and extreme point envelope order[J]. Journal of Vibration and Shock, 2018, 37(14): 102-107

参考文献

[1] 郭瑜, 秦树人, 汤宝平, 等. 基于瞬时频率估计的旋转机械阶比跟踪[J].机械工程学报, 2003, 39（3）:32-36.
    Guo Yu, Qin Shuren, Tang Baoping, et al. Order tracking of rotating machinery based on instantaneous frequency estimation[J]. Chinese Journal of Mechanical Engineering, 2003, 39(3): 32-36.
[2] 康海英, 栾军英, 郑海起, 等. 基于阶次包络谱的轴承故障诊断研究[J]. 振动与冲击, 2006, 25(5): 166-167.
    Kang Haiying, Luan Junying,Zheng Haiqi,et al. Diagnosis of bearing fault based on order enveloped spectrum analysis[J]. Journal of Vibration and Shock, 2006, 25(5):166-167
[3] 康海英, 栾军英, 郑海起, 等. 基于阶次跟踪和经验模态分解的滚动轴承包络解调分析[J]. 机械工程学报, 2007, 43(8): 119-122.
    Kang Haiying, Luan Junying,Zheng Haiqi,et al. Envelope demodulation analysis of bearing based on order tracking and Empirical Mode Decomposition[J]. Chineses Journal of Mechanical Engineering, 2007, 43(8):119-122
[4] Borghesanin P，Ricci R，Chatterton S，et al. A new procedure for using envelope analysis for rolling element bearing diagnostics in variable operating conditions[J]. Mechanic Systems and Signal Processing, 2013, 38:23-35
[5] 郝高岩, 刘永强, 廖英英. 一种基于改进阶次包络谱的滚动轴承故障诊断算法[J]. 振动与冲击, 2016, 25(15): 144-148.
    Hao Gaoyan, Liu Yongqiang, Liao Yingying. A rolling bearing fault diagnosis algorithm based on improved order envelope spectrum[J]. Journal of Vibration and Shock, 2016, 25(15):144-148
[6] Abboud. D., Antoni. J., Sieg-Zieba. S., et al. Envelope analysis of rotating machine vibrations in variable speed conditions: A comprehensive treatment[J]. Mechanical Systems and Signal Processing, 2017,84:200-226
[7] 丁康, 米林, 王志杰. 解调分析在故障诊断中应用的局限性问题[J]. 振动工程学报, 1997, 10(1): 13-20.
    Ding Kang, Mi Lin,Wang Zhijie. Diagnosis of bearing fault based on order enveloped spectrum analysis[J]. Journal of Vibration Engineering, 1997, 10(1):13-20
[8] Dragomiretskiy K， Zosso D. Variational mode decomposition. IEEE Transaction on Signal Processing，2014;3(62) : 531-544
[9] Wang Y X，Markert R. Filter bank property of variational mode decomposition and its applications[J]. Signal Processing，2016，120:509-521.
[10] Wang Y X，Markert R.，Xiang J. W.，et al. Research on variational mode decomposition and its application in detecting rub-impact fault of the rotor system[J]. Mechanical Systems and Signal Processing, 2015, 61:243-251.
[11] Luo Xianjin，Wu Yingjie. Application of variational mode decomposition in wind turbine transmission system fault diagnosis[J].Journal of the Balkan Tribological Association，2016，22(2A)：1693-1706.
[12] 胡爱军，安连锁，唐贵基. HILBERT-HUANG变换端点效应处理新方法[J]. 机械工程学报，2008，44(4)：154–158
    Hu aijun，An Liansuo，Tang Guiji. New Process Method for End Effects of HILBERT-HUANG Transform[J]. Chinese Journal of Mechanical Engineering，2008,44(4):154–158
[13] 刘科伟．旋转机械阶比分析研究与软件实现[D]．南京：南京航空航天大学，2008.
Liu Kewei. Research on Order Analysis in Rotation Machinery and Application with Software Implementation[D]. Nan Jing: Nanjing University of Aeronautics and Astronautics, 2008.