基于Facet模型及组合式假人对汽车-摩托车碰撞事故的仿真

孔令爽1,秦闯1,金先龙1,侯心一2,邱忠2

振动与冲击 ›› 2018, Vol. 37 ›› Issue (14) : 44-50.

PDF(1337 KB)
PDF(1337 KB)
振动与冲击 ›› 2018, Vol. 37 ›› Issue (14) : 44-50.
论文

基于Facet模型及组合式假人对汽车-摩托车碰撞事故的仿真

  •  孔令爽1,秦闯1,金先龙1 ,侯心一2,邱忠2
作者信息 +

Simulation for vehicle-motor collision accidents based on the Facet model and combined dummies

  •  KONG Ling-shuang1,QIN Chuang1,JING Xian-long1, HOU Xinyi2 , QIU Zhong2
Author information +
文章历史 +

摘要

为了更好的解决汽车-摩托车碰撞事故的仿真再现问题,一种新的仿真模型及方法被提出。该方法采用Facet模型建立事故汽车及摩托车的三维模型,采用组合式假人模型建立骑车人的三维模型。由Photomodeler软件得出碰撞初始条件,并利用Madymo软件对事故碰撞过程进行直观的三维仿真再现。针对一起实际的轿车与摩托车碰撞事故,采用上述仿真模型及方法进行事故模拟。仿真结果与实际事故情况可以较好吻合,人体损伤数据与法医鉴定结果可以较好吻合,从而验证了此种仿真模型及方法的可行性及有效性。

Abstract

A new modeling method was proposed in order to analyse vehiclemotor collision accidents. A 3D model for the accident vehicle and motor was established by the Facet model, and that of the motor rider was established with hybrid FEMB models. The initial collision conditions were obtained by using the software Photomodeler, and Madymo software was used to reconstruct and simulate the process of collision accident. Based on a practical vehiclemotor collision accident, the modeling method was adopted in the simulation analysis to perform the accident reconstruction. In this way, the simulation results are in good agreement with the actual situation, and the injury conditions of human body also agree well with the forensic identification. Therefore, the modeling method was validated and would achieve good efficiency and accuracy in vehiclemotor accident analysis.
 

关键词

Facet模型 / 组合式假人 / Madymo / 碰撞仿真

Key words

Facet model / combined human / Madymo / collision simulation

引用本文

导出引用
孔令爽1,秦闯1,金先龙1,侯心一2,邱忠2. 基于Facet模型及组合式假人对汽车-摩托车碰撞事故的仿真[J]. 振动与冲击, 2018, 37(14): 44-50
KONG Ling-shuang1,QIN Chuang1,JING Xian-long1, HOU Xinyi2,QIU Zhong2 . Simulation for vehicle-motor collision accidents based on the Facet model and combined dummies[J]. Journal of Vibration and Shock, 2018, 37(14): 44-50

参考文献

[1] 陈吉光. 基于摩托车事故重建的头盔损伤防护性能研究[D]. 湖南:湖南大学,2013.
CHEN Jin-guang. A study on helmet performance for head injury based on motorcycle accident Reconstruction [D]. Hu Nan: Hunan University, 2013.
[2] 杨群印,金先龙,张晓云,等. 面向人体损伤的载货车-摩托车事故再现研究[J]. 振动与冲击,2007,26(5): 77-80.
Yang Qun-yin, Jin Xian-long, Zhang Xiao-yun, et al. Traffic accident reconstruction of a van-motor vehicle collision oriented to passenger injury [J]. Journal of vibration and shock, 2007, 26(5): 77-80.
[3] 郭磊, 金先龙, 张晓云,等. 基于计算机仿真的摩托车乘员驾乘关系认定研究[J]. 振动与冲击, 2008, 27(7):106-108.
[4] 莫富灏,杨济匡,李松庆. 汽车前部结构对骑自行车人颅脑损伤防护特性的影响[J]. 机械工程学报,2011,47(4):93-99.
Mo Fu-hao, Yang Ji-kuang, Li Song-qing. Influence of vehicle frontal structure on protective characteristics of brain injury of bicyclist [J]. Journal of Mechanical Engineering, 2011,47(4):93-99.
[5] 聂进, 杨济匡. 基于汽车-自行车碰撞事故重建的骑车人动力学响应和损伤研究[J]. 汽车工程, 2015, 37(2):160-167.
[6] E L Carter, C E Neal-Sturgess. MADYMO reconstruction of a real-world collision between a vehicle and cyclist [J]. International Journal of Crashworthiness, 2009,14(4):379-390.
[7] Maki T, Kajzer J, Mizuno K, et al. Comparative analysis of vehicle–bicyclist and vehicle–pedestrian accidents in Japan[J]. Accident Analysis & Prevention, 2003, 35(6):927–940.
[8] 张晓云,金先龙,柴象海,等. 基于接触特征的车一人碰撞事故模型构建与分析[J]. 机械工程学报,2012,48(14):104-111.
Zhang Xiao-yun, Jin Xian-long, Cai Xianghai, et al. Modeling and analysis method of vehicle-pedestrian crash accidents based on contact characters [J]. Journal of Mechanical Engineering, 2012,48(14):104-111.
[9] 柴象海. 基于混合式假人的行人交通事故重构优化方法及应用[D]. 上海:上海交通大学,2010.
Chai Xiang-hai. The optimization method and application of pedestrian traffic accident reconstruction based on knockdown human [D]. Shang Hai: Shanghai Jiao Tong University, 2010.
[10] TNO Automotive China, TNO MADYMO BV. Facet Surface and FE Contact Modeling-Guidelines[EB/OL]. http://wenku.baidu.com/link?url=6wzbVpbCm2oO_bi3ytwhzKKAmRTXnIjUUAnNOfYXkytgJYGVErRjfhx7urHAJpdA3NqGU7giMCWZwD5Zw7JvWZIxid0LF3Uf4lTm8az3VjC, 2014-10-31.
[11] ISO 13232. Motorcycles-Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles-Parts 1 to 8[S]. Switzerland: International Standards Organizations, December 2005.
[12] Bryan, Bertrand. Motorcycle Safety Helmets[R]. Cost 327, Luxembourg: European Commission, 2001
[13] Jikuang Yang. EFFECTS OF VEHICLE FRONT DESIGN PARAMETERS ON PEDESTRIAN HEAD-BRAIN INJURY PROTECTION[C]// 2003.
[14] SHEN Jie, JIN Xianlong, ZHANG Xiaoyun, et al. Simulated  evaluation  of  pedestrian  safety  for  flat-front vehicle [J]. International Journal of Crashworthiness, 2008,13(3): 247-254.
[15] Toropov V V, Filatov A A, Polynkin A A. Multiparameter structural optimization using FEM and multipoint approximations [J]. Structural Optimization, 1993, 6: 7-14.
[16] Wood D P, Simms C K, Walsh D G. Vehicle-pedestrian collisions: Validated models for pedestrian impact and projection[J]. Proceedings of the Institution of Mechanical Engineers Part D Journal of Automobile Engineering, 2005, 219(2):183-195.
[17] Tobias Niebuhr M J S A. Pedestrian injury risk functions based on contour lines of equal injury severity using real world pedestrian/passenger-car accident data[J]. Annals of advances in automotive medicine, 2013, 57(57):145-54.
[18] Jin N, Yang J. A study of bicyclist kinematics and injuries based on reconstruction of passenger car–bicycle accident in China[J]. Accident Analysis & Prevention, 2014, 71(2):50-59.

PDF(1337 KB)

343

Accesses

0

Citation

Detail

段落导航
相关文章

/