U型波纹管声学传递损失的数值分析与实验验证

薛飞 孙蓓蓓 陈建栋 焦仁强

振动与冲击 ›› 2018, Vol. 37 ›› Issue (15) : 90-96.

PDF(1334 KB)
PDF(1334 KB)
振动与冲击 ›› 2018, Vol. 37 ›› Issue (15) : 90-96.
论文

U型波纹管声学传递损失的数值分析与实验验证

  • 薛飞 孙蓓蓓 陈建栋 焦仁强
作者信息 +

Numerical analysis and test verification for acoustical transmission loss of U-shaped corrugated pipes

  • XUE Fei,  SUN Beibei, CHEN Jiandong, JIAO Renqiang
Author information +
文章历史 +

摘要

U型波纹管是常用的管道连接和补偿装置, 波纹管的结构设计对其声学传递特性具有重要影响。采用声学有限元法建立了波纹管的数值计算模型,计算了不同结构参数下波纹管的声学传递损失,得到了结构参数对波纹管声学传递损失的影响规律。基于有限元仿真结果,建立了波纹管传递损失峰值频带上、下限频率计算的数学模型。设计加工了一个波纹管试件,采用两负载实验法测试了其声学传递损失,并将实验结果与有限元仿真结果进行了对比。结果表明:U型波纹管的声学传递损失具有典型的带阻滤波特性;波高、波宽及内径是影响波纹管传递损失峰值频带上、下限频率的最主要因素;波纹管传递损失峰值频带上、下限频率数学模型的计算结果与有限元仿真结果的误差在±3.0%以内;波纹管声学传递损失的实验结果与仿真结果基本吻合,验证了波纹管声学有限元模型和声学传递损失峰值频带上、下限频率数学模型的准确性与有效性。该研究为U型波纹管的声学设计提供相应的理论依据,也为其声学应用提供了新思路。

Abstract

A U-shaped corrugated pipe is a commonly used pipe connection and compensation device. The structural design of corrugated pipes has an important influence on its acoustic transmission characteristics. The numerical calculation model of a U-shaped corrugated pipe was built with the acoustic finite element (FE) method. Its acoustic transmission losses under different structural parameters were computed to obtain influence laws of structural parameters on its acoustic transmission loss. Based on the finite element simulation results, a mathematical model was established to compute the lower and upper cutoff frequencies of the peak frequency band of the pipe’s acoustic transmission loss. A corrugated pipe specimen was designed and fabricated, its acoustic transmission loss was measured using the two-load method, and the test results were compared with the FE simulation ones. The results showed that U-shaped corrugated pipes have a typical band-stop filtering characteristics; corrugation height, corrugation width and its internal diameter are the main factors affecting the lower and upper cutoff frequencies of the peak frequency band of corrugated pipe’s acoustic transmission loss; the error between the computed results of the established mathematical model and the FE simulation results is within ±3.0%; the test results for the U-shaped corrugated pipe’s acoustic transmission loss agree well with the simulation ones, so the correctness and effectiveness of the FE simulation model and the established mathematical model are verified. This study provided a theoretical basis for the acoustical design of U-shaped corrugated pipes, and a new idea for their applications.

关键词

U型波纹管 / 有限元法 / 传递损失 / 数学模型 / 两负载法 / 带阻滤波特性

Key words

 U-shaped corrugated pipes / finite element method / transmission loss / two-load method / mathematical model / band-stop filtering characteristics

引用本文

导出引用
薛飞 孙蓓蓓 陈建栋 焦仁强. U型波纹管声学传递损失的数值分析与实验验证[J]. 振动与冲击, 2018, 37(15): 90-96
XUE Fei, SUN Beibei, CHEN Jiandong, JIAO Renqiang. Numerical analysis and test verification for acoustical transmission loss of U-shaped corrugated pipes[J]. Journal of Vibration and Shock, 2018, 37(15): 90-96

参考文献

[1] 福田基一. 噪声控制与消声设计[M]. 北京:国防工业出版社, 1982.
Fukuda. Noise control and muffler design [M]. Beijing: National Defense Industry Press, 1982.
[2] Munjal ML. Acoustics of ducts and mufflers with application to exhaust and ventilation system design [M]. New York: Wiley, 1987.
[3] Kirby R. Transmission loss predictions for dissipative silencers of arbitrary cross section in the presence of mean flow [J]. Journal of the Acoustical Society of America, 2003, 114(1): 200-209.
[4] Li L, Guangxu C, Lau SK, et al. Transmission loss investigation of two-dimensional thin mufflers by the modal expansion method using a new line source model [J]. Acta Acustica United with Acustica, 2011, 97(97): 54-61.
[5] Lai PCC, Soedel W. Two dimensional analysis of thin, shell or plate like muffler elements [J]. Journal of sound and vibration, 1996, 194(2): 137-171.
[6] 林力, 张旭, 李云, 等. 基于模态展开法的二维消声器传递损失分析[J]. 振动与冲击, 2011, 30(11): 161-164.
LIN Li, ZHANG Xu, LI Yun, et, al. Transmission loss analysis of two-dimensional mufflers based on modal expansion method[J]. Zhendong Yu Chongji/journal of Vibration & Shock, 2011, 30(11):161-164.
[7] Kadam P, Kim J. Experimental formulation of four poles of three-dimensional cavities and its application [J]. Journal of Sound and Vibration, 2007, 307(3): 578-590.
[8] 相龙洋, 左曙光, 吴旭东, 等. 车用两腔抗性消声器声学特性分析及结构优化[J].农业工程学报, 2015, 31(17): 65-71.
XIANG Long-yang, ZUO Shu-guang. WU Xu-dong, et al. Acoustic analysis and structural optimization of dual-chamber reactive muffler [J]. Transactions of the Chinese Society of Agricultural Engineering, 2015, 31(17): 65-71.
[9] Jones PW, Kessissoglou NJ. A numerical and experimental study of the transmission loss of mufflers used in respiratory medical devices [J]. Acoustics Australia, 2010, 38(1): 13-19.
[10] 左曙光, 龙国, 吴旭东, 等. 考虑微穿孔管消声器结构参数的共振频率预估模型[J]. 振动与冲击, 2015, 34(10): 173-178.
ZUO Shu-gang, LONG Guo, WU Xu-dong, et al. Resonant frequency predicting model for a micro-perforated tube muffler considering its structural parameters [J]. Zhendong Yu Chongji/journal of Vibration & Shock, 2015, 34(10):173-178.
[11] 吴大转, 陈一伟, 苗天丞, 等. 管路排气消声器性能的数值模拟与实验验证[J]. 振动与冲击, 2014, 33(9): 148-152.
WU Da-zhuang,CHEN Yi-wei, MIAO Tian-cheng, et al. Numerical simulation and test validation for performance of a muffler in an exhaust pipe[J]. Zhendong Yu Chongji/journal of Vibration & Shock, 2014, 33(9): 148-152.
[12] 杨亮,季振林,WU TW. 消声器传递损失预测的边界元数值配点混合方法[J]. 振动与冲击, 2016, 35(2): 153-157, 206.
YANG Liang, JI Zhen-lin, WU TW. Transmission loss prediction for silencers by using the combination of boundary element method and numerical collocation approach [J]. Zhendong Yu Chongji/journal of Vibration & Shock, 2016, 35(2): 153-157, 206.
[13] Guo R, Tang W, Zhu W. Comparison of 1D transfer matrix method and finite element method with tests for acoustic performance of multi-chamber perforated resonator [J]. Applied Acoustics, 2016, 112: 140-146.
[14] 李恒, 郝志勇, 刘联鋆, 等. 多腔穿孔消声器声学特性三维时域计算及评估[J].浙江大学学报(工学版), 2015, 49(5): 887-892.
LI Heng, HAO Zhi-yong, LIU Lian-yun, et al. Three-dimensional time-domain computation and evaluation of acoustic performance of multi-cavity perforated muffler [J]. Journal of Zhejiang University, 2015, 49(5):887-892.
[15] 杜功焕, 朱哲民, 龚秀芬. 声学基础(第三版)[M]. 南京:南京大学出版社, 2012.
DU Gong-huan, ZHU Zhe-min, GONG Xiu-fen. Fundamentals of Acoustics [M]. Nanjing: Nanjing University Press, 2012.
[16] 付泽民, 莫健华, 陈伟,等. 基于量纲分析法的金属板材折弯回弹数学模型[J]. 机械工程学报, 2010, 46(12): 53-58.
FU Ze-min, MO Jian-hua, CHEN Wei, et al. Springback model for air-bending of sheet metal based on dimensional analysis method[J]. Journal of Mechanical Engineering, 2010, 46:53-58.
[17] 褚志刚, 徐少华, 卢喜,等. 基于传递函数的消声器传声损失测量技术研究[J]. 振动与冲击, 2009, 28(7): 203-207.
CHU Zhi-gang, XU Shao-hua, LU Xi, et al. Measurement of transmission loss of a muffler based on transfer function[J]. Journal of Vibration & Shock, 2009, 28(7): 203-207.
[18] 徐航手, 康钟绪, 季振林. 排气消声器传递损失的实验测量与分析[J]. 噪声与振动控制, 2009, 29(4): 128-131.
XU Hang-shou, KANG Zhong-xu, JI Zhen-lin. Experimental measurement and analysis of transmission loss of exhaust silencers [J]. Noise & Vibration Control, 2009, 29(4): 128-131.
[19] Tao Z, Seybert AF. A review of current techniques for measuring muffler transmission loss[C]. SAE 2003 Noise & Vibration Conference and Exhibition, 2003.
[20] Hua X, Zhang Y, Herrin DW. The effect of conical adapters and choice of reference microphone when using the two-load method for measuring muffler transmission loss [J]. Applied Acoustics, 2015, 93(11): 75-87.

PDF(1334 KB)

Accesses

Citation

Detail

段落导航
相关文章

/