The correctness of the finite element method (FEM) to predict vehicle exhaust muffler’s performance was verified through comparing test results and simulation ones. The effects of the muffler’s substructure connection mode on its whole performance were discussed using FEM. The theoretical cause of these effects was explained from the view point of topology. A visual topology graph was proposed to intuitively reveal a muffler’s inner connection relations based on the graph theory and summarizing connection relations inside the muffler. The specific method for dividing the muffler substructures was gained according to different functional structures’different features indicated in the muffler’s topology graph. Finally,actual examples were used to verify the engineering applicability of the proposed muffler topology graph.
ZHANG Yang,DENG Zhaoxiang,WEN Yiyun.
Muffler topology analysis and its sub-structure division method based on graph theory[J]. Journal of Vibration and Shock, 2018, 37(17): 236-240
{{custom_sec.title}}
{{custom_sec.title}}
{{custom_sec.content}}
参考文献
[1] 何渝生,邓兆祥,陈朝阳. 汽车噪声控制[M]. 北京:机械工业出版社, 1999.
[2] Munjal ML. Analysis and design of pod silencers[J]. Journal of Sound and Vibration, 2003, 262(3):497-507.
[3] Selamet A, Denia FD, Besa AJ. Acoustic Behavior of Circular Dual-chamber Mufflers[J]. Journal of Sound and Vibration, 2003, 265(5): 967-985.
[4] Venkatesham B, Tiwari M, Munjal M L. Transmission loss analysis of rectangular expansion chamber with arbitrary location of inlet/outlet by means of Green's functions[J]. Journal of Sound and Vibration, 2009,323(3-5):1032-1044.
[5] Lee I J, Selamet A, Kim H, et al. Design of a multi-chamber silencer for turbocharger noise[J]. SAE International Journal of Passenger Cars-Mechanical Systems, 2009,2(1):1339-1344.
[6] Montenegro G, Onorati A. Modeling of silencers for i.c. engine intake and exhaust systems by means of an integrated 1D-multid approach[J]. SAE International Journal of Engines, 2008,1(1) : 466-479.
[7] Kirby R, Williams PT, Hill J. A three dimensional investigation into the acoustic performance of dissipative splitter silencers[J]. The Journal of the Acoustical Society of America, 2014, 135(5):2727-2737.
[8] 徐贝贝, 季振林. 穿孔管阻性消声器声学特性的有限元分析[J]. 振动与冲击, 2010,29(3):58-62.
XU Bei-bei, JI Zhen-lin. Finite element analysis of acoustic attenuation performance of perforated tube dissipative silencers[J]. Journal of Vibration and Shock, 2010,29(3): 58-62.
[9] 方智, 季振林. 穿孔管阻性消声器横向模态和声学特性计算与分析[J]. 振动与冲击, 2014,33(7):138-146.
FANG Zhi, JI Zhen-lin. Transversal modes and acoustic attenuation performance of a perforated tube dissipative silencer[J]. Journal of Vibration and Shock, 2014,33(7): 138-146.
[10] 何琳,朱海潮,邱小军等. 声学理论与工程应用[M]. 北京: 科学出版社, 2007.
[11] WANG Xue-ren, MIAO Xu-hong, JI Zhen-lin, etal. Research on Experimental Measurement Technique for Acoustic Performance of Ducts and Silencers[J]. Chinese Internal Combustion Engine Engineering, 2009, 30(2):39-44.
[12] 杜功焕,朱哲民,龚秀芬. 声学基础[M]. 南京: 南京大学出版社,2001.
[13] Gross JL, Yellen J. Handbook of graph theory[M]. Boca Raton: CRC Press, 2004.
[14] 吴文虎, 王建德. 图论的算法与程序设计[M]. 北京:清华大学出版社, 1997.