核电厂隔震结构支座力学性能多因素耦合地震响应研究

何文福,黄一沈,刘文光,刘文燕

振动与冲击 ›› 2018, Vol. 37 ›› Issue (17) : 72-78.

PDF(1500 KB)
PDF(1500 KB)
振动与冲击 ›› 2018, Vol. 37 ›› Issue (17) : 72-78.
论文

核电厂隔震结构支座力学性能多因素耦合地震响应研究

  • 何文福,黄一沈,刘文光,刘文燕
作者信息 +

Seismic responses of a nuclear plant isolated structure supported by rubber bearings with a multi-factor coupled mechanical model

  • HE Wenfu,HUANG Yishen,LIU Wenguang,LIU Wenyan
Author information +
文章历史 +

摘要

针对隔震支座力学性能与水平变形及竖向荷载的耦合特性,对其进行水平、竖向力学性能相关性试验研究,并输入12条剪切波速不同的地震波,对比分析考虑耦合特性与非耦合特性对核电厂隔震结构在地震作用下动力响应的影响。结果表明理论耦合力学模型与试验结果一致;数值结果显示AP1000在地震作用下考虑耦合模型同一工况下的隔震层竖向刚度衰减大于水平刚度衰减;不同地震动因剪切波速的差异对核电隔震结构的响应有较大影响,对于剪切波速较小的软土场地,双向刚度衰减程度最为显著;考虑耦合效应模型上部结构的位移响应显著大于非耦合模型。在超设计基准地震下其位移响应和刚度衰减率都有突变趋势,表明考虑耦合效应模型的支座会进入屈曲破坏阶段,上部结构进入突变倒塌。因此对超设计基准地震下核电隔震结构响应不考虑支座力学性能的耦合将低估结构地震响应。

Abstract

Aiming at rubber bearing mechanical performances’coupling features related to horizontal loading,horizontal deformation and vertical loading,tests for relevance between horizontal and vertical performances of rubber bearings were conducted. Here,considering rubber supporting bearings with a multi-factor coupled mechanical model,the dynamic responses of a nuclear plant isolated structure under 12 waves with different shear wave velocities were simulated and analyzed. The theoretical analysis results agreed well with those of tests. The simulation results showed that the vertical stiffness decay of AP1000 is larger than its horizontal stiffness decay; different earthquakes with different shear wave velocities have large influences on the dynamic responses of the nuclear plant isolation structure,the smaller the shear wave velocity,the larger the stiffness decay rate in both directions; the displacement response of the super-structure of the isolated structure supported by rubber bearings with the coupled model is significantly larger than that supported by bearings without the coupled model; under earthquake beyond design basis,the isolated structure’s displacement response and stiffness decay rate have abrupt changes,bearings with the coupled model enter a buckling failure stage and the  superstructure enters sudden collapse; therefore,under earthquake beyond design basis,if a nuclear plant isolated structure’s dynamic responses are computed not using rubber bearings with the multi-factor coupled mechanical model,its seismic responses can be under-estimated.

关键词

核电厂隔震结构 / 多因素耦合 / 地震响应 / 超设计基准地震

引用本文

导出引用
何文福,黄一沈,刘文光,刘文燕. 核电厂隔震结构支座力学性能多因素耦合地震响应研究[J]. 振动与冲击, 2018, 37(17): 72-78
HE Wenfu,HUANG Yishen,LIU Wenguang,LIU Wenyan. Seismic responses of a nuclear plant isolated structure supported by rubber bearings with a multi-factor coupled mechanical model[J]. Journal of Vibration and Shock, 2018, 37(17): 72-78

参考文献

[1] 沈聚敏,周锡元,高小旺等编著. 抗震工程学[M]. 北京:中国建筑工业出版社, 2000.
SHENJu-min, ZHOU Xi-yuan, GAO Xiao-wang, et al.AseimicEngineering[M]. Beijing: China Architecture & Building Press,2000. (inChinese)
[2] 莊初立,张永山,汪大洋.AP1000 核岛结构基础隔震设计与参数影响分析[J]. 核动力工程,2016, 37(6):45-49.
ZHUANG Chu-li, ZHANG Yong-shan, WANG Da-yang.Seismic Isolation Design and Parameter Effect Analysis ofAP1000 Nuclear Island Structure [J]. Nuclear Power Engineering, 2016, 37(6):45-49. (in Chinese)
[3] 谢礼立,翟长海. 核电工程应用隔震技术的可行性探讨[J]. 地震工程与工程振动,2012, 32(1):1-10.
XIE Li-li, ZHAI Chang-hai. A Prospective study on applicability of base isolation in nuclear power plants [J], Journal of Earthquake Engineering and Engineering Vibration, 2012, 32(1):1-10. (in Chinese)
[4] 李忠诚, 张涛, 许波涛. 基底隔震技术用于核电厂厂房的问题研究[J]. 核动力工程, 2014,35(4):21-26.
LI Zhong-cheng, ZHANG Tao, XU Bo-tao, Application Survey and Prospect of Base-Seismic Isolation Technology for Nuclear Power Plants[J]. Nuclear Power Engineering, 2014, 35(4):21-26. (in Chinese)
[5] Kumar, M., Whittaker, A., Constantinou, M., 2014.An advanced numerical modelof elastomeric seismic isolation bearings.Earthquake Eng. Struct.Dyn. 43 (13),1955–1974.
[6] Kumar, M. Seismic isolation of nuclear power plants using elastomeric bearings[D], New York: The State University of New York,2015.
[7] Warn G, Whittaker A. A study of the coupled horizontal-vertical behavior of elastomeric and lead-rubber seismic isolation bearings[M]. Earthquake Resistant Design, 2006.
[8] Vemuru V S M, Nagarajaiah S, Mosqueda G. Coupled horizontal–vertical stability of bearings under dynamic loading[J]. Earthquake Engineering & Structural Dynamics, 2016, 45(6):913-934.
[9] Manish Kumar, Andrew S.Whittaker, Michael C. Constantinou. Response of Base-isolated Nuclear Structures to Extreme Earthquake Shaking [J].Nuclear Engineering and Design, 2015, 295:860-874.
[10] 韩淼,张文会,朱爱东等.不同层隔震结构在近断层地震作用下动力响应分析[J].振动与冲击,2016,35(5):120-124.
HAN Miao, ZHANG Wen-hui, ZHU Ai-dong, Dynamic Response Analysis for Multi-story Structures with Different Isolation Stories under Near-fault Ground Motions[J],Journal of vibration and shock,2016,35(5):120-124.(in Chinese)
[11] Kwok A O L, Stewart J P, Hashash Y M A. Nonlinear Ground-Response Analysis of Turkey Flat Shallow Stiff-Soil Site to Strong Ground Motion[J]. Bulletin of the Seismological Society of America, 2008, 98(1):331-343.
[12] 陈龙伟,徐欢荣,袁晓铭.浅硬场地剪切波速不确定性对场地地震反应的影响[J].地震工程与工程振动,2014,34(4):123-129.
CHEN Long-wei, XU Huan-rong, YUAN Xiao-min. Influence of shear-wave velocity uncertainty on seismic site response analysis for a shallow stiff site[J].Earthquake engineering and engineering dynamics,2014,34(4):123-129. (in Chinese)
[13] 李平,薄景山,孙有为.剪切波速差异性对地震反应的影响[J].世界地震工程,2010,26:133-137.
LI Ping, BO Jing-shan, SUN You-wei. Shear wave velocity diversity influence on the seismic response[J]. World earthquake engineering, 2010,26:133-137.
[14] 曹均锋,冯伟栋,孟凡月等.剪切波速对场地地表地震动参数的影响[J].震灾防御技术,2013,8(3):252-260.
CAO Jun-feng, FENG Wei-dong, MENG Fan-yue. Effect of Shear Wave Velocity on the Ground Motion
Parameters of Site Surface[J]. Technology for Earthquake Disaster Prevention, 2013,8(3):252-260. (in Chinese)
[15] 日本建筑协会著.隔震结构设计[M].刘文光译.北京:地震出版社,2006.
Architectural Association of Japan. Recommendation for the design of base isolated buildings[M].LIU Wen-guang. Beijing: Seismological Press, 2006.(in Chinese)
[16] 沈朝勇,崔杰,马玉宏.超低硬度隔震橡胶支座的竖向力学性能研究[J].地震工程与工程振动,2012, 32(5):137-145.
SHEN Chao-yong, CUIJie, MA Yu-hong. Vertical mechanical property of elastomeric isolators with ultra-low hardness[J].Earthquake engineering and engineeringvibration,2012,32(5):137-145.(in Chinese)
[17] 孙汉虹编. 第三代核电技术AP1000[M].2010.北京:中国电力出版社.
SUNHan-hong. The third generation of nucleartechnology-AP1000[M]. Beijing: China Power Press,2010. (in Chinese)
[18] GB50267-97. 核电厂抗震设计规范 [S].北京:中国计划出版,2001.
GB50267-97.Code for seismic design of nuclear power plants[S].Beijing: China Planning Press,2001.(in Chinese)

PDF(1500 KB)

Accesses

Citation

Detail

段落导航
相关文章

/