涂敷硬涂层的整体叶盘振动特性与阻尼解析分析

高峰1,2,孙伟1,2

振动与冲击 ›› 2018, Vol. 37 ›› Issue (20) : 1-7.

PDF(1671 KB)
PDF(1671 KB)
振动与冲击 ›› 2018, Vol. 37 ›› Issue (20) : 1-7.
论文

涂敷硬涂层的整体叶盘振动特性与阻尼解析分析

  • 高峰1,2,孙伟1,2
作者信息 +

Analytical analysis for vibration characteristics and damping of a hard-coating blisk

  • GAO Feng1,2, SUN Wei1,2
Author information +
文章历史 +

摘要

为了解决干摩擦阻尼在整体叶盘减振实施困难的问题,本文提出一种对叶片涂敷硬涂层的阻尼减振方法并进行了验证。首先创建了涂敷硬涂层的整体叶盘复合结构连续参数模型;其次,基于Oberst梁和复模量理论推导了涂敷硬涂层的叶片的等效参数表达式,并利用里兹法求解了复合结构的固有特性;最后,以叶片单面涂敷NiCoCrAlY+YSZ硬涂层的整体叶盘为研究实例进行数值计算,并与实验数据进行比较,同时研究了硬涂层对整体叶盘固有特性的影响,尤其是硬涂层厚度与面积对整体叶盘阻尼能力的影响。研究结果表明,NiCoCrAlY+YSZ硬涂层对固有频率有微小影响,变化范围在3%左右,但对模态损耗因子有着显著影响,大约增加了6倍,整体叶盘的共振响应受到明显抑制。

Abstract

To solve the difficulty of dry friction damper implementation in vibration reduction of a blisk (integral bladed disk), a novel damping improvement method by depositing hard coating on blades was proposed and then verified in this study.Firstly, a continuous parameter model (CPM) of the composite structure of the hard-coating bladed disk was established.Then, equivalent parameters of the hard-coating blades were derived based on the Oberst beam and the complex modulus theories.Further, natural characteristics of the hard-coating blisk were obtained by using of the Ritz method.Finally, a blisk with depositing NiCoCrAlY+YSZ hard coating on single side of blades was taken to conduct numerical calculation.The results were compared with those obtained by experiment tests.Moreover, the influence of hard coating on natural characteristics of the hard-coating blisk was discussed, respectively.The influence of coating thickness and area on damping capacity were studied emphatically.Results reveal that the NiCoCrAlY+YSZ hard coating has a significant effect on modal loss factors (improve six times approximately), with slightly altering the natural frequencies (around 3%).The resonant response of the blisk can be suppressed remarkably. 

关键词

整体叶盘 / 硬涂层 / 复合结构 / 振动特性 / 涂层参数 / 阻尼能力

Key words

 blisk / hard coating / composite structure / vibration characteristics / coating parameters / damping capacity

引用本文

导出引用
高峰1,2,孙伟1,2. 涂敷硬涂层的整体叶盘振动特性与阻尼解析分析[J]. 振动与冲击, 2018, 37(20): 1-7
GAO Feng1,2, SUN Wei1,2. Analytical analysis for vibration characteristics and damping of a hard-coating blisk[J]. Journal of Vibration and Shock, 2018, 37(20): 1-7

参考文献

[1] 张海艳,张连锋. 航空发动机整体叶盘制造技术国内外发展概述[J]. 航空制造技术, 2013, Z2:38-41.
ZHANG Hai-yan, ZHANG Lian-feng. Development overview of aeroengine integral blisk and its manufacturing technology at home and abroad [J]. Aeronautical Manufacturing Technology, 2013, Z2:38-41.
[2] Klauke T, Kühhorn A, Beirow B, et al. Numerical investigations of localized vibrations of mistuned blade integrated gisks (blisks) [J]. Journal of Turbo-machinery, 2009, 131(3): 031002.
[3] 刘大响,金捷,彭友梅等.大型飞机发动机的发展现状和关键技术分析[J],航空动力学报,2008,23(6):976-980.
LIU Da-xiang, JIN Jie, PENG You-mei et al. The analysis of development status and key technologies of large aircraft engine [J], Journal of Aerospace Power, 2008,23(6):976-980.
[4] Laxalde D, Thouverez F, Sinou J J, et al. Qualitative analysis of forced response of blisks with friction ring dampers [J]. European Journal of Mechanics-A/Solids, 2007, 26(4): 676-687.
[5] 单颖春, 朱梓根, 刘献栋. 凸肩结构对叶片的干摩擦振动控制研究-理论方法[J]. 航空动力学报,2006,21(1): 168-173.
SHAN Ying-chun, ZHU Zi-gen, LIU Xian-dong. Investigation of the vibration control by frictional constraints between blade shrouds theoretical method [J]. Journal of Aerospace Power, 2006, 21 (1): 168-173.
[6] 陈俊杰. 带冠叶盘干摩擦阻尼振动控制特性研究 [D]. 南京航空航天大学, 2015.
CHEN Jun-jie. Research on vibration characteristic of shrouded bladed disk with friction damper [D]. Nanjing University of Aeronautics and Astronautics, 2015.
[7] Ivancic F, Palazotto A. Experimental considerations for determining the damping coefficients of hard coatings [J]. Journal of Aerospace Engineering, 2005, 18(1): 8-17.
[8] Blackwell C, Palazotto A, George T J, et al. The evaluation of the damping characteristics of a hard coating on titanium [J]. Shock and Vibration, 2007, 14(1): 37-51.
[9] Filippi S, Torvik P J. A methodology for predicting the response of blades with nonlinear coatings [J]. Journal of Engineering for Gas Turbines and Power, 2011, 133(4): 042503.
[10] Green J, Patsias S. A preliminary approach for the modeling of a hard damping coating using friction elements [C], 7th National Turbine Engine High Cycle Fatigue Conference, 2002.
[11] Yen H Y. New analysis and design procedures for ensuring gas turbine blades and adhesive bonded joints structural integrity and durability [D]. The Ohio State University, 2000.
[12] Bruce R W, Schell J D. Process for depositing a coating on a blisk: U.S. Patent Application 12/241,678[P]. 2008-9-30.
[13] Gregori G, Lì L, Nychka J A, et al. Vibration damping of super alloys and thermal barrier coatings at high-temperatures [J]. Materials Science and Engineering: A, 2007, 466(1): 256-264.
[14] Yen H Y, Shen M H H. Passive vibration suppression of beams and blades using magneto mechanical coating [J]. Journal of sound and vibration, 2001, 245(4): 701-714.
[15] Kung S W, Singh R. Vibration analysis of beams with multiple constrained layer damping patches [J]. Journal of Sound and Vibration, 1998, 212(5): 781-805.
[16] Zheng H, Tan X M, Cai C. Damping analysis of beams covered with multiple PCLD patches [J]. International journal of mechanical sciences, 2006, 48(12): 1371-1383.
[17] 孙伟,齐飞.考虑频率依赖性的涂层复合结构固有特性求解[J]. 计算力学学报,2013,(06):867-871+878.
Sun Wei, Qi Fei. Solving nature characteristics of coating composite structural considering frequency dependence property of coating materials [J]. Chinese Journal of Computational Mechanics.2013, (06):867-871+878
[18] Omprakash V, Ramamurti V. Natural frequencies of bladed disks by a combined cyclic symmetry and Rayleigh-Ritz method [J]. Journal of sound and vibration, 1988, 125(2): 357-366.
[19] Yang C H, Huang S C. Coupling vibrations in rotating shaft-disk-blades system [J]. Journal of Vibration and Acoustics, 2007, 129(1): 48-57.
[20] Lee H, Song J S, Cha S J, et al. Dynamic response of coupled shaft torsion and blade bending in rotor blade system [J]. Journal of Mechanical Science and Technology, 2013, 27(9): 2585-2597.
[21] Sanliturk K Y, Koruk H. Development and validation of a composite finite element with damping capability [J]. Composite Structures, 2013, 97: 136-146.
[22] Sun W, Li H, Han Q. Identification of mechanical parameters of hard-coating materials with strain-dependence [J]. Journal of Mechanical Science and Technology, 2014, 28(1): 81-92.
[23] Rouleau L, Deü J F, Legay A, et al. Vibro-acoustic study of a viscoelastic sandwich ring immersed in water [J]. Journal of Sound and Vibration, 2012, 331(3): 522-539.

PDF(1671 KB)

Accesses

Citation

Detail

段落导航
相关文章

/