三向压电悬臂梁振动能量采集器的研究

PDF(3191 KB)

振动与冲击 ›› 2018, Vol. 37 ›› Issue (22) : 57-66.

论文

三向压电悬臂梁振动能量采集器的研究

马骁骏,冷永刚,刘进军,范胜波

作者信息 +

Three-dimensional piezoelectric cantilever-beam energy harvester

MA Xiaojun,LENG Yonggang,LIU Jinjun,FAN Shengbo

Author information +

文章历史 +

摘要

为实现空间各方向振动能量的获取，设计了一种压电悬臂梁式三维振动能量采集器。系统动力学建模以及势函数和非线性磁铁力的分析，揭示了采集器通过双稳或单稳振荡特性而有效获取空间各方向振动能量的机制。仿真模拟和实验测试结果表明，对于一定带宽和强度的随机激励，系统至少存在一个最优的初始磁铁间距，可在两个坐标轴方向同时实现最优机电能量转换，同时保证第三个方向上的次优。对于实际振动环境，确定一个最优的初始磁铁间距，可实现高效的、结构间距无需实时调整的振动能量获取。

Abstract

In order to harvest vibration energy in any direction, a three-dimensional energy harvester was proposed.Its monostable or bistable oscillation characteristics of each cantilever increase the efficiency of energy harvesting.The system dynamic modeling and the nonlinear magnet force in analysis were implemented.The simulation results were compared with experimental results, and the optimization of the structure was carried out.It is shown that in a certain bandwidth and intensity range of random excitation, in the system exists at least one magnet gap which leads to the peak values of output voltages in two axes directions, meanwhile ensures a high-level second optimum in the third axis direction.By adjusting this optimal distance, the energy harvesting can be kept in a high-efficiency state without structural adjustments in real vibrational environment.

导出引用

马骁骏,冷永刚,刘进军,范胜波. 三向压电悬臂梁振动能量采集器的研究[J]. 振动与冲击, 2018, 37(22): 57-66

MA Xiaojun,LENG Yonggang,LIU Jinjun,FAN Shengbo. Three-dimensional piezoelectric cantilever-beam energy harvester[J]. Journal of Vibration and Shock, 2018, 37(22): 57-66

参考文献

[1] Roundy, S J. Energy scavenging for wireless sensor nodes with a focus on vibration to electricity conversion. California: Energy Harvesting & Systems, 2003, 37(11): 1039-22.
[2] 孙健, 李以贵, 刘景全, 杨春生, 何丹农. 微压电式振动能量采集器的研究进展[J]. 微纳电子技术, 2009，46(11), 673-677.
[3] Priya S. Advances in energy harvesting using low profile piezoelectric transducers [J]. Journal of Electroceramics, 2007, 19(1), 167-184.
[4] Roundy S, Wright P K. A piezoelectric vibration based generator for wireless electronics [J]. Smart Materials & Structures, 2004, 13(5): 1131-1142.
[5] Ferrari M, Ferrari V, Guizzetti M, et al. Improved energy harvesting from wideband vibrations by nonlinear piezoelectric converters [J]. Sensors & Actuators A Physical, 2010, 162(2): 425-431.
[6] Gao Y J, Leng Y G, Fan S B, et al. Performance of bistable piezoelectric cantilever vibration energy harvesters with an elastic support external magnet [J]. Smart Materials & Structures, 2014, 23(9): 095003.
[7] Zhou S, Cao J, Erturk A, et al. Enhanced broadband piezoelectric energy harvesting using rotatable magnets [J]. Applied Physics Letters, 2013, 102(17): 101301-R21.
[8] Fan K Q, Chao F B, Zhang J G, et al. Design and experimental verification of a bi-directional nonlinear piezoelectric energy harvester [J]. Energy Conversion & Management, 2014, 86(10): 561-567.
[9] Fan K, Chang J, Pedrycz W, et al. A nonlinear piezoelectric energy harvester for various mechanical motions [J]. Applied Physics Letters, 2015, 106(22): 223902.
[10] Chen R, Ren L, Xia H, et al. Energy harvesting performance of a dandelion-like multi-directional piezoelectric vibration energy harvester [J]. Sensors & Actuators A Physical, 2015, 230: 1-8.
[11] Su W J, Zu J. An innovative tri-directional broadband piezoelectric energy harvester [J]. Applied Physics Letters, 2013, 103(20): 203901-203901-4.
[12] Su W J, Zu J W. Design and development of a novel bi-directional piezoelectric energy harvester [J]. Smart Materials & Structures, 2014, 23(9): 095012.
[13] 沙山克普里亚, 丹尼尔•茵曼, 能量收集技术[M]. 黄见秋，黄庆安译. 东南大学出版社, 2011.
[14] Tan D, Leng Y G, Gao Y J. Magnetic force of piezoelectric cantilever energy harvesters with external magnetic field [J]. The European Physical Journal Special Topics, 2015, 224(14): 2839-2853.
[15] Stanton S C, Mcgehee C C, Mann B P. Nonlinear dynamics for broadband energy harvesting: Investigation of a bistable piezoelectric inertial generator [J]. Physica D Nonlinear Phenomena, 2010, 239(10): 640-653.
[16] Roundy S, Wright P K, Rabaey J. A study of low level vibrations as a power source for wireless sensor nodes [J]. Computer Communications, 2003, 26(11): 1131-1144.
[17] Dutoit N E, Wardle B L. Experimental Verification of Models for Microfabricated Piezoelectric Vibration Energy Harvesters [J]. Aiaa Journal, 2007, 45(5): 1126-1137.
[18] Roundy S, Wright P K. A piezoelectric vibration based generator for wireless electronics [J]. Smart Materials & Structures, 2004, 13(5): 1131-1142(12).
[19] Qiu H C, Schwarz P, Feili D, et al. Electrical performance analysis and characterization of two port piezoelectric resonators [J]. Microsystem Technologies, 2013, 19(8): 1131-1136.
[20] Liu L, Li Z, Gu C, et al. Multi-channel composite spoof surface plasmon polaritons propagating along periodically corrugated metallic thin films [J]. Journal of Applied Physics, 2014, 116(1): 013501-013501-5.