保持架间隙是滚动轴承重要的结构参数之一,直接影响着保持架受力和运动,进一步影响保持架的磨损甚至轴承的寿命。本文在分析轴承保持架间隙与受力关系的基础上,定性分析间隙对保持架磨损的影响。在搭建滚动轴承试验器上开展了保持架间隙对角接触球轴承保持架磨损影响的试验研究。在相同试验条件下对采用不同引导间隙和兜孔间隙保持架的被试轴承进行试验,分析了保持架和钢球表面形貌磨损特征,对比不同保持架间隙(引导间隙、兜孔间隙)条件下保持架与钢球的磨损程度,获得保持架间隙对角接触球轴承保持架磨损的影响规律。试验结果表明,保持架间隙明显影响着保持架兜孔、引导面的磨损,增加引导间隙及兜孔间隙可以降低保持架引导面的磨损。本文研究为保持架间隙的设计与优化提供了理论参考和试验依据。
Abstract
Cage clearances are an important parameter of ball bearings,and they directly affect cage’s force-bearing and motion,and even cage wear and bearing life.Here,based on analyzing the relation between cage clearance and its force-bearing,the effects of cage clearance on cage wear were qualitatively analyzed.Tests were conducted for these effects on a built ball bearing test rig.Under the same test conditions,tests were done for bearings with cages adopting different guiding clearances and pocket ones to analyze morphology wear features of cages and steel ball surfaces,and compare wear degrees of cages and steel ball surfaces under different cage clearances,and obtain the effect laws of cage clearance on its wear in an angular contact ball bearing.The test results showed that cage clearance significantly affects its pocket and guiding surface’s wear; increase in cage’s guiding clearance and pocket one can reduce wear degree of cage guiding surface; the study results provide a theoretical reference and a test basis for ball bearing’s cage clearance design and optimization.
关键词
角接触球轴承 /
保持架 /
引导间隙 /
兜孔间隙 /
冲击 /
磨损
{{custom_keyword}} /
Key words
angular contact ball bearing /
cage /
guiding clearance /
pocket clearance /
impact ;wear
{{custom_keyword}} /
{{custom_sec.title}}
{{custom_sec.title}}
{{custom_sec.content}}
参考文献
[1] Damiens B, Lubrecht A A, Cann P M. Influence of Cage Clearance on Bearing Lubrication©[J]. Tribology Transactions, 2004, 47(1): 2-6.
[2] Ma F, Jiang F, An Q. Simulation of hydrodynamic lubrication between cage pockets and rollers in cylindrical roller bearings[J]. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 2015, 229(14): 2551-2560.
[3] Yang Z, Yu T, Zhang Y, et al. Influence of cage clearance on the heating characteristics of high-speed ball bearings[J]. Tribology International, 2017, 105: 125-134.
[4] Ryu S, Choe B, Lee J, et al. Correlation Between Friction Coefficient and Sound Characteristics for Cage Instability of Cryogenic Deep Groove Ball Bearings[C]. Proceedings of the 9th IFToMM International Conference on Rotor Dynamics, 2015: 1921-1931.
[5] Adams G J, Jones J R. The Effect of Retainer Geometry on the Stability of Ball Bearings[J]. Tribology Transactions, 1976, 19(2): 95-107.
[6] 多田誠二. 高 速 回 転 下 に お け る 保 持 器 音 お よ び 振動・挙 動 の 解 析[J]. KOYO Engineering Journal, 2001, 160: 31.
[7] Gupta P K. Modeling of instabilities induced by cage clearances in ball bearings[J]. Tribology Transactions, 1991, 34(1): 93-99.
[8] Gupta P K. Modeling of Instabilities Induced by Cage Clearances in Cylindrical Roller Bearings[J]. Tribology Transactions, 1991, 34(1): 1-8.
[9] Ghaisas N, Wassgren C R, Sadeghi F. Cage instabilities in cylindrical roller bearings[J]. Journal of Tribology, 2004, 126(4): 681-689.
[10] Meeks C R. The dynamics of ball separators in ball bearings—Part II: results of optimization study[J]. ASLE transactions, 1985, 28(3): 288-295.
[11] 叶振环, 刘占生, 王黎钦. 高速角接触球轴承保持架结构参数优化分析[J]. 煤矿机械, 2015, 36(10): 288-291.
YE zhen-huan,LIU Zhan-sheng,WANG li-qin. Optimization analysis on cage geometry parameters of high-speed angular contact ball bearing[J]. Coal Mine Machinery,2015, 36(10): 288-291.
[12] 邓四二, 顾金芳, 崔永存,等. 高速圆柱滚子轴承保持架动力学特性分析[J]. 航空动力学报, 2014, 29(1):207-215.
DENG Si-er, GU Jin-fang, CUI Yong-cun, et al. Analysis on dynamic characteristics of cage in high-speed cylindrical roller bearing[J]. Journal ournal of Aerospace Power,2014,29(1):207-215.
[13] Sathyan K, Gopinath K, Lee S H, et al. Bearing Retainer Designs and Retainer Instability Failures in Spacecraft Moving Mechanical Systems[J]. Tribology Transactions, 2012, 55(4): 503-511.
[14] 方芳, 李红, 席颖佳,等.保持架结构参数对高速主轴轴承动态性能的影响[J]. 轴承, 2004, (9): 22-24.
FANG fa, LI hong, XI ying-jia, et al. Effect of structure parameters of cage on dynamic performance of high speed spin dle bearings[J]. Bearing, 2004, (9): 22-24.
[15] 邓四二. 滚动轴承设计原理[M]. 北京:中国标准出版社, 2008.
DENG Si-er. Ball bearing design principles[M].Beijing: Standards Press of China.2008.
{{custom_fnGroup.title_cn}}
脚注
{{custom_fn.content}}