基于多级径向节流与柱状波纹压溃的碰撞盒研究

李祝强1,廖昌荣1,付本元1,章鹏1,简晓春2

振动与冲击 ›› 2018, Vol. 37 ›› Issue (3) : 14-21.

PDF(2370 KB)
PDF(2370 KB)
振动与冲击 ›› 2018, Vol. 37 ›› Issue (3) : 14-21.
论文

基于多级径向节流与柱状波纹压溃的碰撞盒研究

  • 李祝强1 ,廖昌荣1  ,付本元1 , 章鹏1 , 简晓春2
作者信息 +

Crash-boxes based on elastic cement’s multi-stage radial flow and crushable cylindrical-corrugated components

  • LI Zhuqiang1  LIAO Changrong1  FU Benyuan1  ZHANG Peng1  JIAN Xiaochun2
Author information +
文章历史 +

摘要

针对汽车碰撞盒容易出现欧拉失稳导致吸能特性劣化问题,研究了一种柱状波纹压溃与胶泥流动产生压差缓冲的碰撞盒。通过实验研究了所用胶泥材料的Oswald-deWaele冥律流体本构模型,得出了胶泥的模型参数;采用落锤冲击实验方法研究了柱状波纹压溃件的冲击力传递特性;建立了胶泥在多级径向通道中流动的连续性方程和控制微分方程,推导了不同径向位置的径向速度分布表达式和压力梯度;采用平均惯性法分析了惯性效应对于压力梯度的影响,得到了胶泥在碰撞盒中非稳态流动缓冲力计算方法。为验证理论计算的合理性,设计制作了胶泥多级径向流动节流与柱状波纹压溃共同作用的碰撞盒样机,利用落锤冲击试验机和力传感器构建了冲击测试平台,并对缓冲装置进行了两种不同高度的冲击实验,比较了不同冲击能量下的胶泥缓冲器传递冲击力的测试值与理论值,分析了产生误差的原因。

Abstract

A basic problem is energy absorption degradation of conventional automotive crash-boxes due to Euler instability. Here, a novel crash-box based on the combined action of elastic cement’s multi-stage radial flow and crushable cylindrical-corrugated components was proposed. Oswald-deWaele fluid constitutive model was employed to characterize the rheological properties of elastic cement, the model parameters were determined through tests. Through dropping-hammer impact tests, impact force transfer characteristics of crushable cylindrical-corrugated components were studied. The continuity equation and governing differential equation of elastic cement in multi-stage radial flow were established. With Oswald-deWaele model, the expressions for elastic cement’s radial velocity distribution at different radial positions and pressure gradient were deduced. The influence of inertia effect on pressure gradient was analyzed based on the average inertia method. Further, the calculation method of buffer force during elastic cement unsteadily flowing in the crash-box was obtained. In order to verify the rationality of the theoretical calculation, the crash-box prototype was designed, fabricated and assembled, and a dropping-hammer test system was constructed for impact tests under two different heights. The impact forces obtained with tests and those calculated with the theoretical method were compared, and the caused errors were analyzed.

关键词

胶泥 / 碰撞盒 / 冥律流体 / 惯性效应

Key words

elastic cement / crash-box / Oswald-deWaele fluid / inertia effect

引用本文

导出引用
李祝强1,廖昌荣1,付本元1,章鹏1,简晓春2. 基于多级径向节流与柱状波纹压溃的碰撞盒研究[J]. 振动与冲击, 2018, 37(3): 14-21
LI Zhuqiang1 LIAO Changrong1 FU Benyuan1 ZHANG Peng1 JIAN Xiaochun2. Crash-boxes based on elastic cement’s multi-stage radial flow and crushable cylindrical-corrugated components[J]. Journal of Vibration and Shock, 2018, 37(3): 14-21

参考文献

[1] 袁伟, 付锐, 郭应时, 等. 道路交通事故死亡人数预测模型[J]. 交通运输工程学报, 2007, 7(4):112-116.
YUAN Wei, FU Rui, GUO Yingshi, et al. Prediction model of death toll resulted from road traffic accidents[J]. Journal of Traffic and Transportation Engineering, 2007, 7(4):112-116.
[2]  MASAO NAGAI. Perspectives of research for enhancing active safety based on advanced control technology[J]. Journal Automotive Safety and Energy, 2010, 1(1):14-22.
[3] Olabi AG, Morris Edmund, Hashmi MSJ. Metallic Tube Type Energy Absorbers:A Synopsis[J]. Thin Walled Structures, 2007, 45(7-8):706-726.
[4] 谭丽辉, 徐涛, 张炜, 等. 带有圆弧形凸槽金属薄壁圆管抗撞性优化设计[J].振动与冲击,2013,32( 21):80-84.
TAN Lihui, XU Tao, ZHANG Wei, et al. Crashworthiness optimization design for a metal thin-walled tube with convex grooves[J]. Journal of Vibration and Shock,2013,32( 21):80-84.
[5] 亓昌, 董方亮, 杨姝, 等. 锥形多胞薄壁管斜向冲击吸能特性仿真研究[J].振动与冲击,2012,31( 24):102-107.
QI Chang, DONG Fangliang, YANG Shu, et al. Energy-absorbing characteristics of a tapered multi-cell thin-walled tube under oblique impact[J]. Journal of Vibration and Shock,2012,31( 24):102-107.
[6] 蒋致禹, 顾敏童, 赵永生. 一种薄壁吸能结构的设计优化[J].振动与冲击,2010,29( 2):111-116.
JIANG Zhiyu, GU Mintong, ZHAO Yongsheng.  Optimization Design of thin-walled energy-basorbing structure[J]. Journal of Vibration and Shock,2010,29( 2):111-116.
[7]  YAMAZAKI K, HAN J. Maximization of the crushing energy absorption of cylindrical shells[J]. Advances in Engineering Software, 2000, 31(6):425-434.
[8] 郑玉卿,朱西产,董学勤,等.Q235B直缝焊管轴向冲击性能的理论和试验研究[J].振动与冲击,2016, 35(20):98-103.
ZHENG Yu-qinq,ZHU Xi-chan,DONG Xue-qin,et al.Theoretical and experimental studies on the axial impact behavior of Q235B longitudinally welded tubes[J].Journal of Vibration and Shock,2016, 35 (20):98-103.
[9] S SANTOSA, WIERZBICKI T. Crash behavior of box column filled with aluminum honeycomb or foam.[J] Computer and Structures, 1998, 68(4):343-367.
[10]  宋毅, 王璠. 复合材料层合圆柱壳体缓冲吸能的实验与模  拟[J].华南理工大学学报(自然科学版),2009,37( 12):140-145.
SONG Yi, WANG Fan. Test and simulation of cushioning energy-absorbing property of composite-laminated cylindrical shells[J]. Journal of South China University of Technology(Natural Science Edition) ,2009,37( 12):140-145.
[11] 郝鹏飞, 张锡文, 何枫. 小型液压缓冲器的动态特性分析[J]. 机械工程学报,2003, 39(3):155-158.
HAO Pengfei, ZHANG Xiwen, HE Feng. Study on Dynamic Characteristics of Small Hydraulic Bumper[J]. Journal of Mechanical Engineering, 2003, 39(3): 155-158.
[12] 苗明, 李明月, 杨万春. 新型液气缓冲器的动态试验及其仿真分析[J]. 机械工程学报,2006, 42(1):212-216.
MIAO Ming, LI Mingyue, YANG Wanchun. Dynamic Test and Simulation to the new Model of Hydraulic-gap Buffer[J]. Journal of Mechanical Engineering,2006, 42(1):212-216.
[13] 贾九红, 黄修长, 杜俭业, 等. 粘滞型胶泥吸能器建模与实验分析[J]. 噪声与振动控制, 2007, 27(5):31-37.
JIA Jiuhong, HUANG Xiuchang, DU Jianye, et al. Modeling and Experimental Study on Viscous Cement Damper[J]. Noise and Vibration Control, 2007, 27(5):31-37.
[14] 马卫华, 宋荣荣, 揭长安, 等. 缓冲器阻抗特性对重载列车动力学性能的影响[J]. 交通运输工程学报, 2011, 11(2):59-64.
MA Weihua, SONG Rongrong, JIE Changan, et al. Influences of buffer impedance characteristics on dynamics performances for heavy haul train[J]. Journal of Traffic and Transportation Engineering, 2011,11(2) :59-64.
[15] J. L. LIVESEY. Inertia effects in viscous flows[J].
International Journal of Mechanical Sciences,
1960, 1(1):84-88.
[16] P. G. MORGAN, A. SAUNDERS. An Experimental Investigation of Inertia Effects in Viscous Flow[J]. International Journal of Mechanical Sciences, 1960, 2(1-2):8-12.
[17] GARTLING D K, PHAN-THIEN N. A numerical simulation of a plastic fluid in a parallel-plate plastometer[J]. Journal of Non-Newtonian Fluid Mechanics, 1984, 14(3):347-360.
[18] DAVIS A M J, FRENKEL A L. Cylindrical liquid bridges squeezed between parallel plates: exact Stokes flow solutions and hydrodynamic forces[J]. Phys Fluids A, 1992, 4(6):1105-1109.
[19] DAI, G., BIRD, R. B. Radial Flow of a Bingham Fluid between Two Fixed Circular Disks[J]. Non-Newtonian Fluid Mech., 1981,8: 349-355.
[20] HUANG, D. C. An Analytical Solution of Radial Flow of a Bingham Fluid between Two Fixed Circular Disks[J]. Journal of Non-Newtonian Fluid Mechanics, 1987, 26(1):143-148.
[21] WENG W. Chooi, S. Olutunde Oyadiji. Design, modeling and testing of magnetorheological(MR) dampers using analytical flow solutions[J].Computers and Structures. 2008,86(3-5):473-482.
[22] W U. LANGE, L. RICHTER. Flow of magnetorheological fluids[J]. Journal of Intelligent Material Systems and Structures, 2001, 12(3):161-164.
[23] K. P. VISHWANATH, A. KANDASAMY. Inertia effects in circular squeeze film bearing using Herschel-Bulkley lubricants[J]. Applied Mathematical Modelling,2010,34(1):219~227.
[24] O. PINKUS, B. STERLICHT. 流体动力润滑理论[M]. 北京:机械工业出版社, 1980:370-386.
O. PINKUS, B. STERLICHT. Hydrodynamic lubrication theory[M]. Beijing:China Machine Press, 1980:370-386.
[25] 罗昌杰, 刘荣强, 邓宗全, 等. 薄壁金属管塑性变形缓冲器吸能特性的试验研究[J] 振动与冲击,2010,29(4):101-106.
LUO Changjie, LIU Rongqiang, DENG Zongquan, et al. Experimental Investigations of Energy Absorber on the Thin-walled Metal Tube’s Plastic Deformation[J]. Journal of Vibration and Shock,2010,29(4):101-106.

PDF(2370 KB)

431

Accesses

0

Citation

Detail

段落导航
相关文章

/