新型着陆器单腿动力学仿真模型碰撞参数修正

吴宏宇1,王春洁1,2,丁建中1,王巨涛1,满剑锋3,罗 敏3

振动与冲击 ›› 2018, Vol. 37 ›› Issue (5) : 50-55.

PDF(1147 KB)
PDF(1147 KB)
振动与冲击 ›› 2018, Vol. 37 ›› Issue (5) : 50-55.
论文

新型着陆器单腿动力学仿真模型碰撞参数修正

  • 吴宏宇1,王春洁1,2,丁建中1,王巨涛1,满剑锋3,罗  敏3
作者信息 +

Collision parameters updating for single-leg dynamic simulation model of a novel lander

  • WU Hongyu1, WANG Chunjie1,2, DING Jianzhong1, WANG Jutao1, MAN Jianfeng3, LUO Min3
Author information +
文章历史 +

摘要

建立新型着陆器的单腿动力学仿真模型,着陆器与着陆面的碰撞采用非线性阻尼弹簧模型模拟。出于提高仿真模型计算结果准确性的目的,参照装有单套着陆缓冲机构的着陆器物理样机的冲击试验结果,对非线性阻尼弹簧碰撞模型中的刚度系数、阻尼系数和非线性指数进行修正。为了提高模型修正的计算效率,构造出能准确反映仿真结果相对于试验结果误差值的Kriging代理模型,并应用第二代非劣排序遗传算法(NSGA-Ⅱ),以最小化Kriging代理模型计算出的误差值作为目标,实现非线性阻尼弹簧碰撞模型的参数修正。将修正后的参数代入仿真模型进行验证,相比于冲击试验结果,新模型计算出的着陆器主体下降距离误差由修正前的29.4%降低到5.9%,辅助支柱最大缓冲行程误差由修正前的24.7%降低到8.4%。

Abstract

Single-leg dynamic simulation model of a novel lander was established, and the collision between lander and landing surface was simulated with a nonlinear spring-damper model. In order to improve the simulation accuracy of the model, its stiffness coefficient, damping coefficient and nonlinear exponent were taken as collision parameters and updated based on impact test results of the physical prototype of a lander with a single set of landing buffer. For improving the calculating efficiency, Kriging surrogate model was established to correctly describe the error between simulation results and test results. Then collision parameters were updated using the non-dominated sorting genetic algorithm II and taking minimizing the error calculated with Kriging model as an objective. The modified parameters were substituted into the simulation model to do a new simulation. Comparing calculation results of the simulation model before and after parametric updating, it was shown that compared with the impact test results, the lander’s main body falling distance error is reduced from 19.2% before parametric updating to 5.9% after that, the lander’s jury strut maximum buffering stroke error is reduced from 24.7% before parametric updating to 8.4% after that.
 

关键词

腿式着陆器 / 动力学分析 / 模型修正 / Kriging代理模型 / 多目标优化

Key words

 leg type lander / dynamic analysis / model updating / Kriging surrogate model / multi-objective optimization

引用本文

导出引用
吴宏宇1,王春洁1,2,丁建中1,王巨涛1,满剑锋3,罗 敏3. 新型着陆器单腿动力学仿真模型碰撞参数修正[J]. 振动与冲击, 2018, 37(5): 50-55
WU Hongyu1, WANG Chunjie1,2, DING Jianzhong1, WANG Jutao1, MAN Jianfeng3, LUO Min3. Collision parameters updating for single-leg dynamic simulation model of a novel lander[J]. Journal of Vibration and Shock, 2018, 37(5): 50-55

参考文献

[1] 杨建中,满剑锋,曾福明,等.“嫦娥三号”着陆缓冲机构的研究成果及其应用[J].航天返回与遥感. 2014,35(6):20-27.
YANG Jianzhong, MAN Jianfeng, ZENG Fuming, et al.The Landing Process of Mars Phoenix Lander Entry Descent,and Landing[J].Spacecraft Recovery & Remote Sensing.2014,35(6):20–27.1143-1145.
[2] 曾福明,杨建中,等.月球着陆器着陆缓冲机构设计方法研究[J].航天器工程,2011,20(2):46-51.
ZENG Fuming, YANG Jianzhong, et al.Study of design method of landing gear for lunar lander[J].Spacecraft Engineering.2011,20(2):46–51.
[3] 陈金宝,聂宏,万峻麟.深空探测着陆器数字化设计及着陆性能影响因素[J].航空学报,2014,35(2):541–554.
CHEN Jinbao, NIE Hong, WAN Junlin.Digital design and landing performance influence factors of deep space lander[J].Acta Aeronautica et astronautic a sinica.2014,35(2):541–554.
[4] NOHMIN M., MIYAHARA A. Modeling for lunar lander by mechanical dynamics software[R]. AIAA-2005-6416, 2005.
[5] 吴建云,王春洁,汪瀚.月球着陆器模型参数修正[J].北京航空航天大学学报.2013,39(10):1366-1375.
WU Jianyun, WANG Chunjie, WANG Han. Model parameters updating of Lunar Lander[J].Journal of Beijing University of Aeronautics and Astronautics.2013,39(10):1366–1375.
[6] GUO B Y, ZHANG W J, LU Q H,et al.A successive selection method for finite element model updating[J].Mechanical Systems and Signal Pro-cessing.2016,39-71:320–333.
[7] NIU J, ZONG G H, CHU F P,et al. Damage identification method of girder bridges based on finite element model updating and modal strain energy[J]. Science China Technological Sciences.2013,28(3):210–226.
[8] ZHOU L R;YAN G R;OU J P.Response surface method based on radial basis functions for modeling large-scale structures in model updating [J]. Computer-Aided Civil and Infrastructure Engineering.2015,58(4):701–711.
[9] REN W X,FANG S E,DENG M Y. Finite element model updating in structural dynamics by using the response surface method[J].Journal of Mechanical Engineering.2011,137(4):248–257.
[10] CHAKRABORTY S,SEN A. Adaptive response surface based efficient Finite Element Model Updating[J]. Finite Elements in Analysis & Design.2014; 80(3):33–405.
[11] 邓小雷,傅建中,夏晨辉,等.数控机床主轴系统热模型参数多目标修正方法[J].机械工程学报,2014,50(15):121-126.
DENG Xiaolei, FU Jianzhong, XIA Chenhui, et al. Multi-objective Correction Method for Thermal Model Parameters of CNC Machine Tool Spindle System[J].Journal of Mechanical Engineering.2014,50(15):121–126.
[12] 胡俊亮,颜全胜,郑恒斌,等.基于Kriging模型的钢管混凝土连续梁拱桥有限元模型修正[J].振动与冲击,2014,33(14):33-39.
HU Junliang, YAN Quansheng, ZHENG Hengbin,et al. CFST arch/continuous beam bridge FEM model updating based on Kriging model[J].Journal of vibration and shock.2014,33(14):33–39.
[13] JIN S S; JUNG H J. Sequential surrogate modeling for efficient finite element model updating[J].Computers and Structures.2016,168: 30–45.
[14] 吴晓君,钟世英,凌道盛,等.数着陆器足垫垂直冲击模型试验研究[J].岩土力学,2012,33(4):1045-1050.
WU Xiaojun, ZHONG Shiying, LING Daosheng, et al. Model test study of vertical impact of space lander footpad[J].Rock and Soil Mechanics.2012,33(4):1045–10.
[15] WANG J T, WANG C J, ZHAO J P. Structural dynamic model updating based on Kriging model using frequency response date[J]. Journal of Vibroengineering.2016,18(6):3484–3498.

PDF(1147 KB)

Accesses

Citation

Detail

段落导航
相关文章

/