基于MOMEDA与Teager能量算子的滚动轴承故障诊断

祝小彦 王永杰

振动与冲击 ›› 2018, Vol. 37 ›› Issue (6) : 104-110.

PDF(1702 KB)
PDF(1702 KB)
振动与冲击 ›› 2018, Vol. 37 ›› Issue (6) : 104-110.
论文

基于MOMEDA与Teager能量算子的滚动轴承故障诊断

  • 祝小彦 王永杰
作者信息 +

Fault diagnosis of rolling bearings based on the MOMEDA and Teager energy operator

  • ZHU Xiaoyan,WANG Yongjie
Author information +
文章历史 +

摘要

滚动轴承早期故障信号中原始冲击成分容易被强噪声淹没,故障特征提取难度较大。针对这一问题,提出了多点最优调整的最小熵解卷积(MOMEDA)与Teager能量算子相结合的滚动轴承故障诊断方法。首先利用MOMEDA算法对原始故障信号进行滤波处理,然后通过Teager能量算子增强解卷积信号中的冲击特征,最后对信号进行包络分析。通过对比包络谱中的主导频率与滚动轴承的故障特征频率判断故障位置,实现轴承的故障诊断。仿真数据与试验数据分析结果表明,本文所提方法能够有效提取故障信号中的特征信息,具有一定的实用性。

Abstract

The original impulse components in rolling bearing incipient fault signals are difficult to be extracted since they are always covered by strong noise. Aiming at this problem, a new fault diagnosis method for rolling bearing incipient faults based on the multipoint optimal minimum entropy deconvolution adjusted (MOMEDA) and Teager energy operator was proposed. Firstly, an original fault signal was filtered by MOMEDA then the Teager energy operator was used to enhance the deconvolution signal. Finally, in order to find the fault frequency, the envelope analysis was employed to deal with the processed signal. The fault location of the rolling bearing was extracted by contrasting the major frequency with the fault frequency of the rolling bearing, therefore, the fault type of the rolling bearing was confirmed. The analysis results of simulated signals and measured signals show that the proposed method is able to extract fault impulse signals and it is kind to practicability.
 

关键词

MOMEDA / Teager / 故障诊断 / 滚动轴承 / 特征提取

Key words

MOMEDA / Teager / Fault Diagnosis / Rolling Bearing / Feature Extraction

引用本文

导出引用
祝小彦 王永杰. 基于MOMEDA与Teager能量算子的滚动轴承故障诊断[J]. 振动与冲击, 2018, 37(6): 104-110
ZHU Xiaoyan,WANG Yongjie. Fault diagnosis of rolling bearings based on the MOMEDA and Teager energy operator[J]. Journal of Vibration and Shock, 2018, 37(6): 104-110

参考文献

[1]. 余发军,周凤星,严保康.基于字典学习的轴承早期故障稀疏特征提取[J].振动与冲击,2016,35(6): 181-186.
YU Fa-jun, ZHOU Feng-xing, YAN Bao-kang. Bearing initial fault feature extraction via sparse representation based on dictionary learning [J].Journal of Vibration and Shock, 2016,35(6): 181-186.
[2]. Wiggins R.A. Minimum Entropy Deconvolution [J]. Geoexploration, 1978, 9(16): 21- 35.
[3]. 柳玉昕,石岩,王美俊,等. 基于最小熵解卷积和能量算子的滚动轴承故障诊断方法[J].组合机床与自动化加工技术, 2016, (6):114-117.
LIU Yu-xi, SHI Yan, WANG Mei-jun,et al. A Method of Fault Diagnosis for Rolling Bearing Based on Minimum Entropy Deconvolution and Energy Operator [J].Modular Machine Tool & Automatic Manufacturing Technique, 2016, (6):114-117.
[4]. 冷军发,杨鑫,荆双喜. 最小熵解卷积在滚动轴承早期故障诊断中的应用[J].机械传动, 2015, 39(8):189-192.
LENG Jun-fa, YANG Xin, JING Shuang-xi. Application of Minimum Entropy Deconvolution in the Rolling Element Bearing Fault Diagnosis [J]. Journal of Mechanical Transmission, 2015, 39(8):189-192.
[5]. 王宏超, 陈进,董广明. 基于最小熵解卷积与稀疏分解的滚动轴承微弱故障特征提取[J].机械工程学报, 2013, 49(1):88-94.
WANG Hong-chao, CHEN Jin, DONG Guang-ming. Fault Diagnosis Method for Rolling Bearing’s Weak Fault Based on Minimum Entropy Deconvolution and Sparse Decomposition[J]. Journal of Mechanical Engineering, 2013, 49(1):88-94.
[6]. Geoff L. McDonald, Qing Zhao. Multipoint Optimal Minimum Entropy Deconvolution and Convolution Fix: Application to vibration fault detection [J]. Mechanical Systems and Signal Processing, 2017, 82: 461-477.
[7]. 王天金,冯志鹏,郝如江,等.基于Teager能量算子的滚动轴承故障诊断研究[J].振动与冲击,2012, 31(2):1-5, 85.
WANG Tain-jin, FENG Zhi-peng, HAO Ru-jiang,et al. Fault diagnosis of rolling element bearings based on Teager energy operator[J]. Journal of Vibration and Shock, 2012, 31(2):1-5, 85.
[8]. 鞠萍华,秦树人,赵玲,等 基于LMD的能量算子解调方法及其在故障特征信号提取中的应用[J]. 振动与冲击, 2011, 30(2): 1-4, 23.
JU Ping-hua, QIN Shu-ren, ZHAO Ling, et al. Energy operator demodulating approach based on LMD and its application in extracting characteristics of a fault signal [J]. Journal of Vibration and Shock, 2011, 30(2): 1-4, 23.
[9]. Antoni J, Bnnardot F, Raad A, et al. Cyclostationary modeling of rotating machine vibration signals [J]. Mechanical Systems and Signal Processing, 2004, 18(6): 1285 - 1314.
[10]. 唐贵基,王晓龙.自适应最大相关峭度解卷积方法及其在轴承早期故障诊断中的应用[J].中国电机工程学报, 2015, 35(6): 1436-1444.
TANG Gui-ji, WANG Xiao-long. Adaptive Maximum Correlated Kurtosis Deconvolution Method and Its Application on Incipient Fault Diagnosis of Bearing[J]. Proceedings of The Chinese Society for Electrical Engineering, 2015, 35(6): 1436-1444.
[11]. Randall R B, Antoni J, Chobsaard S. The relationship between spectral correlation and envelope analysis in the diagnosis of bearing faults and other cyclostationary machine signals [J]. Mechanical Systems and Signal Processing, 2001, 15(5): 945-962
[12]. 马伦,康建设,孟妍,等.基于 Morlet 小波变换的滚动轴承早期故障特征提取研究[J].仪器仪表学报,2013,34(4): 920-926.
MA Lun, KANG Jian-she, MENG Yan, et al. Research on feature extraction of rolling bearing incipient fault based on morlet wavelet transform [J]. Chinese Journal of Scientific Instrument,2013,34(4): 920-926.
[13]. Qiu H, Lee J, Lin J, et al.Wavelet filter-based weak signature detection method and its application on rolling element bearing prognostics[J]. Journal of Sound and Vibration,2006,289(4-5):1066-1090.
[14]. 唐贵基, 王晓龙. 自适应最大相关峭度解卷积方法及其在轴承早期故障诊断中的应用[J].中国电机工程学报,2015,35(6):1436-1444.
TANG Gui-ji, WANG Xiao-long. Adaptive Maximum Correlated Kurtosis Deconvolution Method and Its Application on Incipient Fault Diagnosis of Bearing [J].Proceedings of the Chinese Society for Electrical Engineering. 2015, 35(6): 1436-1444.

PDF(1702 KB)

781

Accesses

0

Citation

Detail

段落导航
相关文章

/