发动机起停时动力总成悬置系统的设计方法研究

PDF(1085 KB)

振动与冲击 ›› 2018, Vol. 37 ›› Issue (8) : 141-145.

论文

王道勇1，赵学智1，上官文斌1,2，叶必军2

作者信息 +

A design method of a power train mounting system to improve key on/off vibration of a car

WANG Daoyong1，ZHAO Xuezhi1，SHANGGUAN Wenbin1,2，YE Bijun2

Author information +

文章历史 +

摘要

在对发动机起停时激励源分析的基础上,提出了起停时动力总成悬置系统的动态响应评价指标和计算方法。考虑增加悬置系统的阻尼可以减小发动机启停时的振动，本文设计并制造了一款半主动阻尼拉杆，其特点是：当发动机起动时，半主动阻尼拉杆给悬置系统提供很大的阻尼，而当发动机正常工作时，半主动阻尼拉杆提供小阻尼，隔离发动机的高频振动。分析了不同的发动机的启动扭矩对动力总成振动的影响。在较大的启动扭矩激励下，对比了添加半主动阻尼拉杆后，通电和不通电时动力总成的纵向加速度，冲击度，悬置动态支反力和VDV四个指标的变化。研究表明添加半主动阻尼拉杆可以很大程度改善汽车起停时的振动，达到节油的目的。

Abstract

This paper put forward a dynamic response evaluation index and a calculation method of the powertrain mounting system key on/off condition based on the analysis of the excitation force. Considering that increasing the damping of the mounting system can reduce the vibration when the engine key on/off, a semiactive damping strut was designed and manufactured. The semiactive damping strut provides the mounting system with a large damping, and when the engine is working normally, the semiactive damping strut provides small damping to isolate the high frequency vibration of the engine. At the same time, the influence of different engine starting torque on powertrain vibration was analyzed. Under the condition of large starting torque excitation, the changes of longitudinal acceleration, impact degree, mount dynamic supporting force and VDV of the powertrain were compared after the semiactive damping strut was introduced. Studies have shown that the use of damping strut can improve key on/off vibration to a large extent and save oil as well.

导出引用

王道勇1，赵学智1，上官文斌1,2，叶必军2. 发动机起停时动力总成悬置系统的设计方法研究[J]. 振动与冲击, 2018, 37(8): 141-145

WANG Daoyong1，ZHAO Xuezhi1，SHANGGUAN Wenbin1,2，YE Bijun2. A design method of a power train mounting system to improve key on/off vibration of a car[J]. Journal of Vibration and Shock, 2018, 37(8): 141-145

参考文献

[1] Jung-Hwan Bang, Hee-Wook Yoon. Experiment and simulation to improve key on/off vehicle vibration quality[J]. SAE Technical Paper Series 2007 -01-2363.Mitchell L. D. A Basic Approach to Gearbox Noise Prediction. SAE Technical paper821065.
[2] Youngchan Lee. Study on Transient vibration response characteristics of front transverse power train at key on/off[J]. SAE Technical Paper Series 2007 -01-2283.
[3] ManchiVenkateswaraRao, S NatarajaMoorthy. NVH analysis of powertrain start/stop transient phenomenon by using wavelet analysis and time domain transfer path analysis[J]. SAE 2015-01-2293.
[4] Hiroshi Sugimura, Masaya Takeda. Development of HEV Engine Start-Shock Prediction Technique Combining Motor Generator System Control and Multi-Body Dynamics Models[J]. SAE International 2013-01-2007.
[5] Kuang Ming L. An Investigation of Engine Start-Stop NVH in A power Split Powertrain Hybrid Electric Vehicle[J]. SAE Technical paper 2006-01-1500,DOI:10.4271/2006-01-1500.
[6] Wen-Bin Shangguan, Da-Ming Chen. A method for calculating the displacements of a powertrain and mounts in a powertrain mounting system including torque struts under quasi-static loads[J]. Journal of Automobile Engineering, 2012, 226(5): 634-647.
[7] SudharsanSrinivasan, Jeff Orzechowski. Powertrain Metric to Assess Engine Stop Start Refinement[J]. SAE International 2015-01-2186.
[8] Per-OlofSturesson, ChristerSvensson. N & V Integration and Optimization of Driveline Using Transfer Path Analysis[J]. SAE International, 2012-01-1531.
[9] John C. Dixon. The Shock Absorber Handbook, Second Edition[M]. The Society of automotive Engineers, Inc, 2007.
[10] R.Sonnenburg, A.Stretz. Dynamic properities of automotive damper modules[J]. ORIGINAl, 2012,82:1795-1804.
[11] Yu Y H, Naganathan N G, Dukkipai R V. A literature review of automotive vehicle engine mounting systems[J]. Mechanism and Machine Theory, 2001,36:123-142.
[12] Wen-Bin Shangguan. Engine mounts and powertrain mounting systems: a review[J]. International Journal of Vehicle Design, 2009, 49(4),237-258.
[13] 阎红玉, 徐石安. 发动机-悬置系统的能量法解耦及优化设计[J].汽车工程, 1993,15(6):321-328.
Yan Hongyu, XuShian. Energy Method of Decouping and Computer Optimization of Engine Mounting Systems[J]. Automotive Engineering, 1993, 15(6): 321-328. (in Chinese)
[14] 裘新, 吕振华. 轿车动力总成-液压悬置-副车架系统参数的优化设计[J].汽车技术, 1998(07).
QiuXin, LvZhenhua. Optimum design of the power assembly-hydraulic suspension-subframesystem[J]. Vehicle design, 1998(07), 1-6.
[15] Demic M. A contribution to the optimization of the position and the characteristics of passage car powertrain mounts[J]. International Journal of Vehicle Design, 1990,11(1):87-103.