脉冲风洞天平短时振荡测力数据稳态值提取的优化识别方法

PDF(1586 KB)

振动与冲击 ›› 2018, Vol. 37 ›› Issue (8) : 153-157.

论文

王锋，武龙，吴东升，乐嘉陵

作者信息 +

An optimization method of recovering steady state value from short time oscillatory signal of force balance for impulse tunnel

WANG Feng,WU Long,WU Dongsheng,LE Jialing

Author information +

文章历史 +

摘要

针对脉冲型风洞有效试验时间短、测力天平输出为大幅振荡信号的问题，提出了一种从振荡信号中提取稳态值的方法。忽略风洞启动段的数据，只取来流稳定段上的天平测力信号，将其看作是因受恒定载荷作用而处于非零稳态位置的多自由度系统由未知初始位移和速度引起的自由振动响应，用参数化的自由振动模型拟合测量输出，通过求解优化问题辨识出未知参数，其中就包含了所求的天平稳态输出值。用几个算例对方法进行了检验。

Abstract

An impulse tunnel can only provide a flow with very short testing period, and the outputs of force balance are oscillatory signals with large amplitude. A new method was proposed to recover the steadystate value from the oscillatory signal. The balance’s signals over the initiation period of the tunnel were omitted and only the signals over the steady testing period were adopted for analysis. This segment of the balance’s signals was regarded as free vibration responses of a multidegreeoffreedom system caused by initial displacements and velocities, and the system was originally in a nonzero steady state supported by constant loads. The free vibration response was formulated with unknown parameters, and an optimization problem was constructed by minimizing the deviation of theoretical response from the measured response. The unknown parameters including the steadystate value of the balance’s output could be estimated by solving the optimization problem. Finally the effectiveness of the proposed method was demonstrated by several application examples.

导出引用

王锋，武龙，吴东升，乐嘉陵. 脉冲风洞天平短时振荡测力数据稳态值提取的优化识别方法[J]. 振动与冲击, 2018, 37(8): 153-157

WANG Feng,WU Long,WU Dongsheng,LE Jialing. An optimization method of recovering steady state value from short time oscillatory signal of force balance for impulse tunnel[J]. Journal of Vibration and Shock, 2018, 37(8): 153-157

参考文献

[1] 贺伟, 童泽润, 李宏斌. 单模块超燃发动机推力测量天平研制[J]. 航空动力学报, 2010,25(10):2285-2289.
HE Wei, TONG Ze-run, LI Hong-bin. Investigation of thrust balance for the single module scramjet[J]. Journal of Aerospace Power, 2010, 25(10): 2285-2289.
[2] 刘云峰, 汪运鹏, 苑朝凯, 等. JF12激波风洞10°尖锥标模气动力特性试验研究: 第十七届全国激波与激波管学术会议, 成都, 2016[C].
LIU Yun-feng, WANG Yun-peng, YUAN Chao-kai, et al. Aerodynamic force and moment measurement of 10° half-angle cone in JF12 shock tunnel[C]. The 17th Shock and Shock Tube Meeting, Chengdu, 2016.
[3] Thorby D. Structural dynamics and vibration in practice[M]. Oxford, UK: Elsevier, 2008.
[4] Sacchi M D, Ulrych T J, Walker C J. Interpolation and Extrapolation Using a High-Resolution Discrete Fourier Transform[J]. IEEE Transactions On Signal Processing, 1998,46(1):31-38.
[5] Sacchi M D, Ulrych T J. Estimation of the discrete Fourier transform, a linear inversion approach[J]. Geophysics, 1996,61(4):1128-1136.
[6] Rao S S. Engineering Optimization: Theory and Practice[M]. 4th Ed. Hoboken, New Jersey: John Wiley & Sons, 2009.
[7] 王锋, 任虎, 周正, 等. 载荷辨识方法用于脉冲风洞模型阻力测量研究[J]. 振动与冲击, 2015, 34(24): 202-208.
WANG Feng, REN Hu, ZHOU Zheng. et al. Drag force measurement in impulse facilities by identification method[J]. Journal of Vibration and Shock, 2015, 34(24): 202-208.
[8] 俞鸿儒. 大幅度延长激波风洞试验时间[J]. 中国科学：物理学力学天文学, 2015,45(9):94701.
YU Hong-ru. A big increase in shock tunnel test times[J]. Scientia Sinica Physica, Mechanica & Astronomica, 2015, 45(9): 094-701