冲击机具凿入过程的能量传递是冲击凿入系统的核心问题。针对大多数冲击凿入系统采用单圆柱活塞的情况，得出了单圆柱活塞凿入系统的能量传递效率表达式，阐明了冲击凿入的二重能量转化过程及在活塞和工具中的残留能量，并分析了系统参数对其的影响。研究表明：在二重能量转化过程中，系统凿入效率η为入射波有效转化效率ηi和凿入转化效率ηR之积；在系统常数q=0，1<θ<2.5情况下，具有最佳效率区间（η>75%）；残留能量在q≥0时较低，在q<0时，随q值的减少急速增大；残留能量的增大将影响凿入系统的正常工作和疲劳寿命。以冲击能量传递试验系统上的试验作为计算实例，计算和测试结果基本一致。
Abstract
The energy transmission in percussive machines’ penetration process is a key problem of percussive systems. Here, for general percussive penetration systems with a single cylinder piston, the expression of energy transfer efficiency for a percussive system with a single cylinder piston was derived. Furthermore, the dual energy conversion process and residual energy in piston and tools were presented with the wave theory. Influences of system parameters on energy transmission were analyzed. The study showed that in the dual energy conversion process, the system penetration efficiency η is a product of the incident wave effective conversion efficiency and the penetration conversion efficiency; there is an optimal region for η (η>75%) when the system constant q=0 and 1<θ<2.5; the residual energy is lower when q≥0, but it increases rapidly with decrease in q when q<0; increase in the residual energy affects normal operation and fatigue life of a percussive system. Taking tests on a percussive energy transmission test system as examples, the results of calculation agree well with those of tests.
关键词
冲击凿入 /
应力波 /
能量传递
{{custom_keyword}} /
Key words
percussive penetration /
stress wave /
energy transmission
{{custom_keyword}} /
{{custom_sec.title}}
{{custom_sec.title}}
{{custom_sec.content}}
参考文献
[1] Hustrulid, W.A. and Fairhurst, C.. A theoretical and experiment study of percussive drilling of rock[J].Int. J. Rock Mech. Mining Sci., 1971, 8:313-333.
[2] Lundberg B. Energy tronsfer in rock destruction[J]. Int. J. Roc Mech. Mining Sci., 1973, 10(5):381-389.
[3] 赵统武. 冲击凿入效率的波动理论研究[J]. 金属学报, 1980, 16(3):263-275.
Zhao Tong-wu. Research on the wave theory of impact penetration efficiency[J]. Acta metallurgica sinica, 1980, 16(3):263-275.
[4] 赵翼飞，白争锋，杨斌久.最优应力波形下的冲击机械冲锤部件的反演设计及参数优化[J].振动与冲击,2016,35(4):102-109+123.
ZHAO Yi-fei，BAI Zheng-feng，YANG Bin-jiu. Impactor's inverse design and parametric optimization ofan impact machinery based on optimal stress waveform[J]. Journal of vibration and shock,2016,35(4):102-109+123.
[5] 金解放,李夕兵,常军然等. 循环冲击作用下岩石应力应变曲线及应力波特性[J]. 爆炸与冲击,2013,33(6):619-619.
JIN Jie-fang, LI Xi-bing, CHANG Jun-ran, etal. Stress-strain curve and stress wave characteristics of rock subjected to cyclic impact loadings[J]. Explosion and shock waves,2013,33(6):619-619.
[6] 李季阳,谭卓英,李文等.冲击旋转加载下金刚石钻头-岩面动摩擦特性试验模拟研究[J]. 振动与冲击,2015,34(22):210-214.
LI Ji-yang, TAN Zhuo-ying, LI Wen. Experimental simulation of dynamic friction characteristics of interface between diamond drill and rock under impact-rotational loading[J]. Journal of vibration and shock,2015,34(22):210-214.
[7] 王俊奇,王亮,张杰.冲击载荷下岩石压胀对其性质的影响[J]. 爆炸与冲击,2012,32(3):333-336.
WANG Jun-qi, WANG Liang, ZHANG Jie. Influences of dilatancy on rock properties under shock loading[J].Explosion and shock waves,2012,32(3):333-336.
[8] 宋义敏,杨小彬,金璐.冲击载荷作用下岩石Ⅰ型裂纹动态断裂试验研究[J]. 振动与冲击,2014,33(11):49-53+60.
SONG Yi-min, YANG Xiao-bin, JIN Lu, et al.Dynamic fracture test for rock I-type crack under impact load[J].Journal of vibration and shock,2014,33(11):49-53+60.
[9] 张倩倩,韩振南,张梦奇.冲击载荷作用下锥形截齿磨损的试验和数值模拟研究[J]. 振动与冲击,2016,35(13):58-65.
ZHANG Qian-qian, HAN Zhen-nan, ZHANG Meng-qi, et al. Tests and simulation for wear of conical pick under impact load[J]. Journal of vibration and shock,2016,35(13):58-65.
[10] 吕小红,罗冠炜.拍频激励下冲击钻进系统的运动分析[J].振动与冲击,2012,31(24):1-4+15.
Lü Xiao-hong，LUO Guan-wei. Kinematic analysis of an impact-progressive system under beat frequency excitation[J]. Journal of vibration and shock,2012,31(24):1-4+15.
[11] 赵统武. 冲击钻进动力学[M]. 北京:冶金工业出版社,1996.
ZHAO Tong-wu. Dynamics of percussive drilling[M]. Bei-jing:Metallurgical industry press, 1996.
[12] 山东矿业学院,长沙矿冶研究院.冲击凿岩测试系统研究的试验应用和经济效益分析[R].冲击凿岩测试系统鉴定技术报告,泰安:山东矿业学院, 1997.
Shandong Mining Institute, Changsha Research Institute of mining and metallurgy.Analysis of test application and economic benefits of percussive drill test system[R]. Identification technology report for percussive drill test system, Taian:Shandong Mining Institute, 1997.
{{custom_fnGroup.title_cn}}
脚注
{{custom_fn.content}}
PDF(885 KB)
