粗糙接触面旋转铰间隙碰撞动力学建模与仿真

郭嘉楠,何鹏,刘占生,黄洪雁

振动与冲击 ›› 2019, Vol. 38 ›› Issue (11) : 132-139.

PDF(1310 KB)
PDF(1310 KB)
振动与冲击 ›› 2019, Vol. 38 ›› Issue (11) : 132-139.
论文

粗糙接触面旋转铰间隙碰撞动力学建模与仿真

  • 郭嘉楠,何鹏,刘占生,黄洪雁
作者信息 +

Impact dynamic modeling and simulation for a revolute joint  with rough contact surfaces and a clearance

  • GUO Jianan, HE Peng, LIU Zhansheng, HUANG Hongyan
Author information +
文章历史 +

摘要

运动副间隙会导致机构关节间发生碰撞接触,粗糙的运动副接触面会对含有间隙的机械系统动态特性产生较大的影响。针对机构中常见的旋转铰结构特点,建立了一种兼顾能量损失和粗糙接触面动力学特性的碰撞模型,并考虑了接触面形貌的影响。分析了碰撞速度、恢复系数以及粗糙度等因素对接触碰撞力的影响规律,以曲柄滑块机构为研究对象进行动力学建模,仿真结果发现,随着碰撞速度和恢复系数的增大,碰撞力和碰撞变形逐渐增大,碰撞持续时间缩短;随着微凸体粗糙度的增大,碰撞力和碰撞变形逐渐减小,碰撞持续时间缩短;曲柄滑块机构的间隙越小,滑块承受的碰撞力越小,运动副内碰撞发生的频率越高。研究结果表明本文所建立模型能够完善碰撞力模型,为机构设计提供参考,有利于工程实际应用。

Abstract

The clearance in a kinematic pair causes impact contact in joints of mechanisms.  Rough contact surfaces of a kinematic pair can significantly affect dynamic characteristics of a machinery system with clearances.  Aiming at structural features of a common revolute joint in mechanisms, an impact model considering energy loss, dynamic characteristics of rough contact surface and effects of contact surface morphology was established to analyze influence laws of impact velocity, restitution coefficient and roughness, etc. on the contact impact force. A crank-slider mechanism was taken as the study object to establish its dynamic model. The simulation results showed that with increase in impact velocity and restitution coefficient,  impact force and impact deformation gradually increase, and impact duration shortens; with increase in microconvex roughness, impact force and impact deformation gradually decrease, and impact duration shortens; the smaller the clearance of the crank-slider mechanism, the less the impact force exerted on the slider, the higher the frequency of impact appearing in the kinematic pair; so the established model can be used to impove the impact force model, provide a reference for mechanism design and it is beneficial to engineering application. 

关键词

运动副间隙 / 碰撞模型 / 粗糙面接触 / 动力学特性

Key words

Revolute joint clearance / Contact model / Rough surface contact / Dynamic characteristics /

引用本文

导出引用
郭嘉楠,何鹏,刘占生,黄洪雁. 粗糙接触面旋转铰间隙碰撞动力学建模与仿真[J]. 振动与冲击, 2019, 38(11): 132-139
GUO Jianan, HE Peng, LIU Zhansheng, HUANG Hongyan. Impact dynamic modeling and simulation for a revolute joint  with rough contact surfaces and a clearance[J]. Journal of Vibration and Shock, 2019, 38(11): 132-139

参考文献

[1] Imed Khemili, Lotfi Romdhane. Dynamic analysis of a flexible slider-crank mechanism with clearance [J]. European Journal of Mechanics A/Solids, 2008, (27): 882-898.
[2] Flores P. Modeling and simulation of wear in revolute clearance joints in multibody systems [J]. Mechanism and Machine Theory, 2009, (44): 1211-1222.
[3] Shi Bing, Jin Ye. Dynamic analysis of the reheat-stop-valve mechanism with revolute clearance joint in consideration of thermal effect [J]. Mechanism and Machine Theory, 2008, (43): 1625-1638.
[4] Onesmus Muvengei, John Kihiu, Bernard Ikua. Dynamic analysis of planar rigid-body mechanical systems with two-clearance revolute joints [J]. Nonlinear Dynamics, 2013, (73): 259-273.
[5] 张慧博,潘东,陈军,等. 间隙旋转铰接触碰撞模型固有特性分析[J]. 机械科学与技术,2012, 31(2): 239-243.
ZHANG Huibo, Pan Dong, Chen Jun, et al. Inherent Characteristic Analysis of Contact Dynamics Model of Revolute Joint with Clearance [J]. Mechanical Science and Technology for Aerospace Engineering, 2012, 31(2): 239-243.
[6] 阎绍泽,向吴维凯,黄铁球. 计及间隙的运动副和机械系统动力学的研究进展[J]. 北京大学学报(自然科学版), 2016, 52(4): 741-755.
YAN Shaoze, XIANG Wuweikai, HUANG Tieqiu. Advances in Modeling of Clearance Joints and Dynamics of Mechanical Systems with Clearances [J]. Acta Scientiarum Naturalium Universitatis Pekinensis, 2016, 52(4): 741-755.
[7] Greenwood J A, Williamson J. Contact of nominally flat surfaces [J]. Proceedings of the Royal Society of London. Series A, Mathematical and Physical Sciences, 1966: 300-319.
[8] Kadin Y., Y. Kligerman, I. Etsion. Unloading an elastic-plastic contact of rough surfaces [J]. Journal of the Mechanics and Physics of Solids, 2006, (54): 2652-2674.
[9] Robert L. Jackson, Itzhak Green. A statistical model of elasto-plastic asperity contact between rough surfaces [J]. Tribology International, 2006, (39): 906-914.
[10] Fan Jin, Wei Zhang, Qiang Wan, et al. Adhesive contact of a power-law graded elastic half-space with a randomly rough rigid surface [J]. International Journal of Solids and Structures, 2016(81): 244-249.
[11] 赵广,苏钧聪,韩清凯,等. 圆柱面接触刚度建模与仿真[J]. 华中科技大学学报(自然科学版). 2015, 43(12): 21-26.
ZHAO Guang, Su Juncong, Han Qingkai, et al. Modeling and simulation of cylindrical surface contact stiffness [J]. Journal of Huazhong University of Science and Technology(Natural Science Edition), 2015, 43(12): 21-26.
[12] Hunt K. H., Crossley F. R. E.. Coefficient of restitution interpreted as damping in vibroimact [J]. Journal of Applied Mechanics, 1975: 440-445.
[13] Lankarani H. M., Nikravesh P. E.. A contact force model with hysteresis damping for impact analysis of multibody systems [J]. Journal of Mechanical Design, 1990, (112): 369-376.
[14] 白争锋,赵阳,赵志刚. 考虑运动副间隙的机构动态特性研究[J]. 振动与冲击, 2011, 30(11):17-20.
BAI Zhengfeng, ZHAO Yang, ZHAO Zhigang. Dynamic characteristics of mechanisms with joint clearance [J]. Journal of Vibration and Shock, 2011, 30(11): 17-20.
[15] Paulo Flores, Margarida Machado, Miguel T. Silva, et al. On the continuous contact force models for soft materials in multibody dynamics [J]. Multibody System Dynamics, 2011,(25): 357-375.
[16] Johnson K. Contact Mechanics [M]. 徐秉业,罗学富,刘信声.北京:高等教育出版社,1992.
[17] Anil Misra, Shiping Huang. Micromechanical stress–displacement model for rough interfaces: Effect of asperity contact orientation on closure and shear behavior [J]. International Journal of Solids and Structures, 2012(49): 111-120.
[18] Zavarise G., Borri-Brunetto M., Paggi M. On the reliability of microscopical contact models [J]. Wear, 2003(257): 229-245
[19] Flores P., Koshy C.S., Lankarani, H. M.  et al. Numerical and Experimental Investigation on Multibody systems with Revolute Clearance Joints [J]. Nonlinear Dynamics, 2011(65): 383-398.

PDF(1310 KB)

Accesses

Citation

Detail

段落导航
相关文章

/