肘杆式压力机机构动力学建模与分析向量键合图法

王中双,韦静

振动与冲击 ›› 2019, Vol. 38 ›› Issue (11) : 140-145.

PDF(663 KB)
PDF(663 KB)
振动与冲击 ›› 2019, Vol. 38 ›› Issue (11) : 140-145.
论文

肘杆式压力机机构动力学建模与分析向量键合图法

  • 王中双,韦静
作者信息 +

Vector bond graph method for dynamic modeling and analysis of a toggle press mechanism

  • WANG Zhongshuang, WEI Jing
Author information +
文章历史 +

摘要

为提高肘杆式压力机机构动力学建模与分析的效率及可靠性,提出了相应的向量键合图法。由系统向量键合图模型基本场及结型结构的输入、输出向量间的代数关系,推导出便于计算机自动建立的系统驱动力矩及运动副约束反力方程的统一公式。根据运动约束关系,将平面运动构件、旋转铰及移动副的向量键合图模型组合起来,建立了三角形肘杆压力机机构的向量键合图模型。通过有效的增广方法,消除了机构向量键合图模型中的微分因果关系,克服了其给机构自动建模所带来的代数困难。在此基础上,实现了三角形肘杆压力机机构动力学自动建模与计算,揭示了脉冲形式的工作阻力对机构动力学性能的影响,说明了所述方法的有效性。

Abstract

In order to improve reliability and efficiency of dynamic modeling and analysis for a toggle press mechanism, a vector bond graph method was proposed. Using algebraic relations of input vectors and output ones in basic field and junction structure of a system’s vector bond graph model, the unified formulas for the system driving moment and constraint force equations of kinematic pairs were derived, they were convenient for a computer to set up automatically. According to kinematic constraint relations,the vector bond graph model of a triangular toggle press mechanism was built by assembling vector bond graph models of planar moving components, revolute joints and translational pairs. With the effective augmentation method, differential causalities in the mechanism vector bond graph model were eliminated to overcome the algebraic difficulty brought by these causalities in the mechanism automatic modeling. Furthermore, the automatic dynamic modeling and calculation of the triangular toggle press mechanism was realized to reveal influences of working resistance in the form of pulse pressing on the mechanism dynamic performance, and illustrate the validity of the proposed method.

关键词

向量键合图 / 动力学建模与分析 / 肘杆式压力机机构 / 脉冲冲压 / 因果关系

Key words

  / Vector bond graph, Dynamic modeling and analysis, Toggle press mechanism, Pulse pressing Causality

引用本文

导出引用
王中双,韦静 . 肘杆式压力机机构动力学建模与分析向量键合图法[J]. 振动与冲击, 2019, 38(11): 140-145
WANG Zhongshuang, WEI Jing. Vector bond graph method for dynamic modeling and analysis of a toggle press mechanism[J]. Journal of Vibration and Shock, 2019, 38(11): 140-145

参考文献

[1] 施立军.SDP-160F肘杆式伺服压力机样机设计及分析 [D].扬州:扬州大学,2013:1-33.
    SHI Li-jun. Design and analysis of SDP-160 toggle press driven by servo motor[D]. Yangzhou: Yangzhou University, 2013: 1-33.
[2] 洪嘉振著.计算多体系统动力学[M].北京:高等教育出版社,1999:1-319.
    HONG Jia-zheng. Computational dynamics of multibody systems[M]. Beijing: Advanced Education Press, 1999: 1-319. 
[3] 郑相周,唐国元编著。机械系统虚拟样机技术 [M]。北京:高等教育出版社,2010:142-264
    Zheng Xiang-zhou, Tang Guo-yuan. Virtual prototyping technology of mechanical systems[M]. Beijing: Advanced Education Press, 2010: 141-264.
[4] Karnopp D C, Margolis D L, Rosenberg R C. System dynamics: modeling and simulation of mechatronic systems[M]. New York: Wiley, 2000:1-351.
[5] Sanchez R, Medina A. Wind turbine model simulation: A bond graph approach[J]. Simulation Modelling Practice and Theory. 2014, 41: 28-45.
[6] Mishra C, Samantaray A K, Chakraborty G. Bond graph modeling and experimental verification of an ovel scheme for fault diagnosis of rolling element bearings in special operating conditions[J].  Journal of Sound and Vibration, 2016, 377: 302–330.
[7] Kumar A, Pathak P M, Sukavanam N. Trajectory control of two DOF rigid-flexible space robot by a virtual space vehicle[J]. Robotics and Autonomous Systems, 2013, 61: 473~482
[8] Cipek M, Pavković D, Petrić J. A control-orientied simulation model of power-split hybrid electric vehicle[J]. Application Energy, 2013, 101: 121~133
[9] 王中双.键合图理论及其在系统动力学中的应用[M]. 哈尔滨: 哈尔滨工程大学出版社,2000:114-128.
    WANG Zhong-shuang. Bond graph theory and its application in system dynamics[M]. Harbin: Harbin Engineering University Press, 2000: 114-128.
[10] 王中双,陆念力,巨勇智. 柔性平面连杆机构动态静力分析的回转键合图法[J].南京理工大学学报,2005,25(5):565-569.
    WANG Zhong-shuang, LU Nian-li, JU Yong-zhi. Gyrobondgraph Method of Static Analysis for Dynamic of
Flexible Planar Linkage[J]. Journal of Nanjing University of Science and Technology, 2005, 25(5): 565-569.
[11] Behzadipour S, Khajepour A. Causality in vector bond graph and its application to modelling of   multi-body dynamic systems [J]. Simulation Modelling Practice and Theory, 2006, 14(3): 279-295.
[12]  王中双,赵彦伟,陶洋洋等。含齿轮副平面多体系统动态静力分析向量键合图法[J]. 机械传动,2015,39(6):35-38.
    WANG Zhong-shuang, ZHAO Yan-wei, TAO Yang-yang, et al. Vector bond graph method of kineto - static analysis for planar multi-body system with gear pair[J]. Journal of Mechanical Transmission, 2015, 39(6): 35-38.
[13] 王中双,井维科. 基于向量键合图法的行星轮系动态静力分析[J].机械传动,2016,40(5):20-23.
    WANG Zhong-shuang, JING Wei-ke. Kineto-static analysis of planetary gear train based on vector bond graph method[J]. Journal of Mechanical Transmission, 2016, 40(5): 20-23.
[14] 王威,沈政,宋玉玲等.含间隙和干摩擦的连杆机构系统动力学研究[J].振动与冲击,2015,34(18):211-214.
    WANG Wei, SHEN Zheng, SONG Yu-ling, et al. System dynamics of linkage mechanism with clearance and dry friction[J]. Journal of Vibration and Shock, 2015, 34(18): 211-214.
[15] 刘波,梅瑛,李瑞琴。平面双曲柄冲压机刚柔耦合模型的动态仿真[J].机械传动,2012,36(12):                      68-71.
    LIU Bo, MEI Ying, LI Rui-qin. Dynamic simulation for rigid-flexible coupling model of planar double crank punch press[J]. Journal of Mechanical Transmission, 2012, 36(12): 68-71.

PDF(663 KB)

Accesses

Citation

Detail

段落导航
相关文章

/