轴力作用下局部加厚T型管节点抗冲击性能试验研究

崔安稳,曲慧,丛静岚

振动与冲击 ›› 2019, Vol. 38 ›› Issue (15) : 121-126.

PDF(1227 KB)
PDF(1227 KB)
振动与冲击 ›› 2019, Vol. 38 ›› Issue (15) : 121-126.
论文

轴力作用下局部加厚T型管节点抗冲击性能试验研究

  • 崔安稳,曲慧,丛静岚
作者信息 +

Tests for anti-impact performance of locally thickened T-shaped tubular joints under axial force

  • CUI Anwen,QU Hui,CONG Jinglan
Author information +
文章历史 +

摘要

试验完成了1个未加厚和3个局部加厚的T型管节点的抗冲击性能研究。试验过程中考虑了局部加厚区的加厚壁厚Tc和加厚区的长度Lc对局部加厚T型管节点抗冲击性能的影响。试验结果表明:试件局部加厚可以提高节点域截面抗弯刚度,减小局部凹陷变形,使塑性绞线外移;提高节点受冲击初始阶段耗能能力和荷载-位移曲线平台段的耗能比例,避免节点域吸收大量能量,提高节点抗冲击能力,有效地保护了节点。研究结果为进一步探索局部加厚节点动态抗冲击承载力提供了参考。

Abstract

Tests for anti-impact performances of one unthickened T-shaped tubular joint and three ones locally thickened were conducted to study effects of thickened wall thickness Tc and thickened zone length Lc on anti-impact performance of locally thickened T-shaped tubular joints.Test results showed that specimens’ local thickening can raise bending stiffness of joint cross-section, reduce local dent deformation, and make plastic hinge line move up; meanwhile, it can improve joints’ energy-dissipating ability in the initial stage of impact and the energy-dissipating proportion of load-displacement curve’s platform segment to avoid joint zone absorbing much energy, raise joint’s anti-impact ability, and effectively protect it; the results can provide a reference for further exploring the dynamic anti-impact ability of locally thickened joints.

关键词

T型管节点 / 局部加厚 / 横向冲击 / 抗冲击 / 破坏模态

Key words

tubular T-joint / local thickening / lateral impact / impact resistance / failure mode

引用本文

导出引用
崔安稳,曲慧,丛静岚. 轴力作用下局部加厚T型管节点抗冲击性能试验研究[J]. 振动与冲击, 2019, 38(15): 121-126
CUI Anwen,QU Hui,CONG Jinglan. Tests for anti-impact performance of locally thickened T-shaped tubular joints under axial force[J]. Journal of Vibration and Shock, 2019, 38(15): 121-126

参考文献

[1] 曲慧, 霍静思, 许超. 环口板加强后T型管节点落锤抗冲击试验研究[J]. 振动与冲击, 2013, 32(1):108-112.
QU Hui,HUO Jing-si,XU Chao. Dynamic b ehaviors of a collar plate reinforced tubular T-joint under drop weight impact loads[J]. Journal of Vibration and Shock,2013, 32(1):108-112.
[2] 陈凡.冲击荷载作用下热轧T型方钢管节点力学性能研究[D]. 湖南大学, 2012.
CHEN Fan. Research on Dynamic Behavior of Hot-rolled Square tubular T-joints under impact load[D]. Hu Nan University, 2012.
[3] 王鹏. 冲击荷载作用下冷弯T型方钢管节点力学性能研究[D]. 湖南大学, 2013.
WANG Peng. Research on dynamic behavior of cold-formed square steel tubular T-joints under impact load[D]. Hu Nan University, 2013.
[4] 欧阳翊龙, 王鹏, 霍静思. 上翼缘垫板加强T型管节点抗冲击性能机理研究[J].中国科技论文, 2015(01):10-15.
OUYANG Yi-long, WANG Peng, HUO Jing-si. Mechanism analysis of top flange plate reinforced steel tubular T-joint under impact loading[J]. China Sciencep Aper, 2015(01):10-15.
[5] Qu H, Hu Y F, Huo J S, et al. Experimental study on tubular K-joints under impact loadings[J]. Journal of Constructional Steel Research, 2015, 112:22-29.
[6] 武振宇, 张壮南, 丁玉坤, 张耀春. K型、KK型间隙方钢管节点静力工作性能的试验研究[J]. 建筑结构学报, 2004,25(2)32-38.
WU Zhen-yu,ZHANG Zhuang-nan, DING Yu-kun, ZHANG Yao-chun. Experimental research on static behavior of square hollow section K-and KK-joints[J]. Journal of Building Structures, 2004, 25(2):32-38.
[7] Yousuf M M, Uy B, Tao Z, Remennikov A, Liew JYR. Impact behaviour of pre-compressed hollow and concrete filled mild and stainless steel columns[J]. Steel Construction, 2014, 96(96):54-68.
[8] Yu W, Zhao J, Luo H, Shi J, Zhang D. Experimental study on mechanical behavior of an impacted steel tubular T-joint in fire[J]. Journal of Constructional Steel Research, 2011, 67(9):1376-1385.
[9] Qu H, Huo J, Xu C, Fu F. Numerical studies on dynamic behavior of tubular T-joint subjected to impact loading[J]. International Journal of Impact Engineering, 2014, 67(5):  12-26.
[10] Qu H, Li A L, Huo J S, Liu Y Z. Dynamic performance of collar plate reinforced tubular T-joint with precompression chord. Engineering Structures. 141(2017).555-570.
[11] NORSOK Standard N-004. Design of steel structures. 2004.
[12] Lu LH, de Winkel GD, Yu Y, Wardenier J. Deformation limit for the ultimate strength of hollow sections. Proceeding of 6th International Symposium on Tubular Structures, Melbourne,  Australia (1994), 341-347.
[13] GB50017-2003,钢结构设计规范[S]. 北京: 中国计划出版社, 2003.
     GB50017-2003, Code for design of steel structures[S]. Bei Jing: China Planning Press, 2003.
[14] 任晓虎,霍静思,陈柏生.高温后钢管混凝土短柱落锤动态冲击试验研究[J].振动与冲击,2011, 30(11):71-78.
REN Xiao-hu, HUO Jing-si, CHEN Bai-sheng. Dynamic behaviors of
concrete-filled steel tubular stub columns after exposure tu high temperature[J]. Journal of Vibration and Shock, 2011, 30(11):71-78.
[15] 唐九如.钢筋混凝土框架节点抗震[M]. 东南大学出版社, 1989.
TANG Jiu-ru. Seismic Resistance of Joints In Reinforced Concrete Frames. Southeast University Press, 1989.
[16] 曲慧, 霍静思, 许超. T形管节点落锤动态抗冲击性能试验研究[J]. 建筑结构学报, 2013, 34(4): 65-73.
QU Hui, HUO Jing-si, XU Chao. Experimental Study on Dynamic Impact Resistance of Drop-hammer of tubular T- Joints[J]. Journal of Architectural Structure, 2013, 34(4): 65-73.

PDF(1227 KB)

286

Accesses

0

Citation

Detail

段落导航
相关文章

/