带抗风支座的组合隔震体系隔震层布置优化及试验分析

PDF(1285 KB)

振动与冲击 ›› 2019, Vol. 38 ›› Issue (19) : 161-167.

论文

李飞燕1, 吴应雄2

作者信息 +

Optimization and tests of isolation layer arrangement for a combined isolation system with anti-wind supports

LI Feiyan1，Wu Yingxiong2

Author information +

文章历史 +

摘要

风荷载较大地区的隔震结构设计存在隔震效果、抗风设计和隔震层位移受控难以协调的问题。提出增设抗风支座协同隔震支座的组合隔震体系，利用抗风支座变刚度工作机理解决设计难题。介绍了新型钢板抗风支座的构造，并以某实际工程为例，根据我国《建筑抗震设计规范》(GB50011—2010)将隔震后结构的水平地震作用归纳为比非隔震时降低半度、一度和一度半三个档次，建立三种对比隔震模型并进行计算分析，从而进行隔震层布置优化。分析结果表明：增设新型钢板抗风支座可以同时满足隔震效果、抗风承载力和隔震层位移受控的要求；提出隔震支座的水平承载力宜接近风载下隔震层水平剪力标准值，从而保证结构正常工作状态的建议；抗风支座设计应重点验算抗剪强度要求；抗风支座数值模拟和静载抗剪试验结果表明，其在正常使用和小震下提供抗剪承载力，中震下破坏退出工作，保证结构隔震效果。

Abstract

Isolation structure design in areas with larger wind load has problems of isolation effect, anti-wind design and controlling displacement of isolation layer being difficult to coordinate with each other.Here, a combined isolation system with additional anti-wind supports to coordinate with isolation ones was proposed to apply the variable stiffness mechanism of anti-wind supports to overcome design difficulty. The structure of the new type steel plate anti-wind supports was introduced.Taking a practical project as an example，according to China’s “aseismic design code of buildings” (GB 50011—2010), horizontal seismic actions of a structure after isolation were summed as three levels including 0.5 , 1and 1.5lower than those of the structure without isolation.3 types of contrast isolation models were built to do calculation and analysis,and optimize isolation layer arrangement.The results showed that the new arranged steel plate anti-wind supports can simultaneously meet requirements of isolation effect, anti-wind load-bearing ability and controlling displacement of isolation layer;the horizontal load-bearing capacity of isolation supports should be close to the standard value of horizontal shear force of isolation layer under wind load to ensure the normal working condition of the structure;the design of anti-wind supports should focus on checking requirements of shear strength.Numerical simulation and static-load shear tests of anti-wind supports showed that they can provide shear-bearing capacity under normal use and small earthquakes; they are damaged and lose working ability under medium-earthquakes to ensure the structural isolation effect.

导出引用

李飞燕1, 吴应雄2. 带抗风支座的组合隔震体系隔震层布置优化及试验分析[J]. 振动与冲击, 2019, 38(19): 161-167

LI Feiyan1，Wu Yingxiong2. Optimization and tests of isolation layer arrangement for a combined isolation system with anti-wind supports[J]. Journal of Vibration and Shock, 2019, 38(19): 161-167

参考文献

[1] 日本建筑学会．隔震结构设计 [M]．刘文光，译．北京：地震出版社，2006．
Japan Institute of architecture. Recommendation for the Design of Base Isolated Buildings [M]. LIU Wenguang, translation. Beijing: Seismologic press, 2006.
[2] 傅金华．日本抗震结构及隔震结构的设计方法[M]．北京：中国建筑工业出版社，2011．
FU Jing-hua．Design Methods of Japan Antiseismic Structure and Isolation Structure [M].Beijing: China Architecture & Building Press, 2011.
[3] Akira SUMI，Hideakl TSUBAKI，Kiyoaki HIRAKAWA. Development of a shear-pin with a gap resisting wind load for base isolated high-rise housing [J] . AU J.Technol.Des,2007, 13(26) :431-43.
[4] 周云, 冯启浩, 卢德辉．带新型抗风拉索高层隔震结构抗风与隔震性能研究[J]. 建筑结构, 2016, 46(11): 77-84.
Zhou Yun，Feng Qihao，Lu Dehui. Study on wind-re-sistant an isolation performance of high-rise isolated structure with new wind-resistant cable [J] . Building structure, 2016, 46(11): 77-84.
[5] 周云, 胡登云, 张超，张敏．变性能粘滞阻尼器隔震结构体系抗风与隔震分析[J]. 建筑结构, 2017, 47(8): 76-81.
Zhou Yun，Hu Dengyun，Zhang Chao，Zhang Min. Wind resistant and seismic isolation analysis of isolated structure incorporated with segmented-performance viscous damper [J] . Building structure, 2017, 47(8): 76-81.
[6] 吴应雄，王兆樑，祁皑，颜学渊．叠层橡胶支座与抗风支座组合隔震反应分析[J]．振动与冲击，2014，33(5)：149-154．
Wu Yingxiong，Wang Zhaoliang，Qi ai，Yan Xueyuan.Response analysis for a compound isolation structure consisting of laminated rubber bearings and wind-resistant supports[J]. Vibration and shock,2014, 33(5)：149-154．
[7] 吴应雄，夏侯唐斌，颜桂云，祁皑．考虑增设变刚度抗风支座的隔震结构减震分析[J]．振动工程学报，2016，29(5)：851-859.
Wu Yingxiong，Xiahou Tangbin，Yan Guiyun，Qi Ai．Analyses of mitigation effects of isolation structure considering additional wind-resistant support of variable stiffness[J]．Journal of Vibration Engineering, 2016，29(5)：851-859.
[8] 郑顺利, 林喜发, 洪嘉维．抗风橡胶隔震支座：ZL201620356548.4[P] .2016-9-7
Zheng Shunli，Lin Xifa，Hong Jiawei. Wind-resistant rubber isolation bearing：ZL201620356548.4[P] .2016-9-7
[9] 沈朝勇, 谭平, 黄襄云，等．一种隔震橡胶支座新型防火及抗风组合装置：ZL201410608417.6 [P] .2016-8-24
Shen Chaoyong，Tan Ping，Huang Xiangyun. A New Combination Device of Fire Protection and Wind Resistance for Isolated Rubber Bearing：ZL201410608417.6 [P] .2016-8-24
[10] 李恒跃, 姜文英, 顾海龙．一种弹性体建筑抗风支座：ZL 201220655593.1 [P] .2013-8-28
Li Hengyue，Jiang Wenying，Gu Hailong. A Wind Resistant Bearing for Elastomeric Buildings：ZL 201220655593.1 [P] .2013-8-28
[11] GB50011－2010.建筑抗震设计规范[S].北京:中国建筑工业出版社，2010.
GB50011—2010. Code for seismic design of buildings [S]. Beijing: China Architecture & Building Press, 2010.
[12] DBJ/T13-252-2016福建省建筑工程隔震橡胶支座和装置施工及验收规程[S]．福建:福建省住房和城乡建设厅,2016（JGJ360-2015
Code for Construction and Acceptance ofRubber Seismic Isolation Bearing and Devicefor Building Isolation Engineering in Fujian [S]．Fujian: Housing and Urban-Rural Development of Fujian, 2016（in Chinese））
[13] CECS．2004，建筑工程抗震性态设计通则（试用）[S]．北京：中国计划出版社．
CECS. 2004, General rule for performance based seismic design of building (abbreviated to General Rule)[S]. Beijing: China Planning Press.
[14] Mohammadi J, Zamani Heydari A. Seismic and wind load considerations for temporary structures[J]. Practice Periodical on Structural Design and Construction, 2008, 13(3): 128-134.
[15] 龚瑞杰．基础组合隔震高层剪力墙结构的地震反应分析[D].西安：西安工业大学.
Gong Ruijie. Analysis on Seismic Response ofHigh—rise shear wall structure with Combined Base Isolation[D] .Xi’an, Xi’an Technological University.
[16]柯昌义．增设减隔震装置的高层建筑抗风性能研究[D].南昌：南昌航空大学.
Ke Changyi. Studyonwindresistantperformanceof highrisebuildingswithseismicisolation devices[D] .Nanchang: Nanchang Hangkong University.
[17] 廖云昆，龙云刚．一种可更换的简易抗风装置：ZL201620155426.9 [P] .2016-8-17.
Liao Yunkun,Long Yungang.A Replaceable Simple Wind Resistance Device：ZL201620155426.9 [P] .2016-8-17.
[18] 肖从真，薛彦涛，曾德民，等．成都凯德风尚高层建筑隔震设计与研究[J]. 建筑结构, 2009, 39(6): 93-97.
Xiao Congzhen , Xue Yantao , Zeng Demin,et cl. Research on design of base-isolated high-rise structure of Capital Land the Loft Chengdu [J] . Building structure, 2009, 39(6): 93-97.