表层下缺陷对球-环系统的振动影响分析

张生光 1,王文中 2

振动与冲击 ›› 2019, Vol. 38 ›› Issue (3) : 1-7.

PDF(847 KB)
PDF(847 KB)
振动与冲击 ›› 2019, Vol. 38 ›› Issue (3) : 1-7.
论文

表层下缺陷对球-环系统的振动影响分析

  • 张生光 1 ,王文中 2
作者信息 +

Effects of subsurface defects on vibration of a ball-ring system

  • ZHANG Shengguang1,WANG Wenzhong2
Author information +
文章历史 +

摘要

表层下缺陷严重影响滚动轴承使用性能与精度,为研究其对轴承振动特性影响,搭建了球-环接触实验台,使用球-环接触模型模拟滚动体与滚道接触,以圆环内表面或表层下加工的圆孔模拟缺陷,通过实验过程中对球托振动位移和载荷的测量,研究了缺陷对系统振动的影响。实验结果表明,随着载荷增加,表层下缺陷对系统振动行为的影响逐渐增大,但是影响显著小于表面缺陷;随着转速升高,缺陷对系统振动的影响逐渐减小,并通过理论建模进行了分析和验证;研究表明滚道缺陷是影响系统精度保持性的重要因素之一。

Abstract

Subsurface defects seriously affect rolling bearings’ performance and accuracy.In order to investigate their influences on bearing vibration characteristics, a ball-ring contact test rig was built to simulate contacts between balls and races in bearings using a ball-ring contact model.Manufactured micro holes on ring surface or subsurface were used to simulate defects.Then effects of defects on the system vibration were investigated through measuring vibration displacements and loads of the ball-ring contact system in tests.The test results showed that effects of subsurface defects on vibration behavior of the system increase with increase in loads, but the effects are obviously smaller than those of ring surface defects; influences of defects on vibration behavior of the system decreases with increase in rotating speed, the influences are analyzed and verified through theoretical modeling; race defects are one of important factors affecting the precision retaining ability of bearing systems.

关键词

振动 / 表层下缺陷 / 振动位移

Key words

 vibration / subsurface defect / vibration displacement

引用本文

导出引用
张生光 1,王文中 2. 表层下缺陷对球-环系统的振动影响分析[J]. 振动与冲击, 2019, 38(3): 1-7
ZHANG Shengguang1,WANG Wenzhong2. Effects of subsurface defects on vibration of a ball-ring system[J]. Journal of Vibration and Shock, 2019, 38(3): 1-7

参考文献

[1] Ai X. A Comprehensive model for assessing the impact of steel cleanliness on bearing performance[J]. ASME Journal of Tribology, 2015, 137(1): 011101.
[2] Leroux J, Fulleringer B, Nélias D. Contact analysis in presence of spherical inhomogeneities within a half-space [J]. International Journal of Solids and Structures, 2010, 47(22): 3034–3049.
[3] Zhou K, Chen W W, Keer L M. Multiple 3D inhomogeneous inclusions in a half space under contact loading [J]. Mechanics of Materials, 2011, 43(8): 444–457.
[4] 张生光,王文中,赵自强,等. 考虑材料夹杂的接触问题数值分析[J]. 机械工程学报, 2015, 51(02): 21-29.
ZHANG Sheng-guang, WANG Wen-zhong, ZHAO Zi-qiang, et al. Numerical analysis of the contact problem considering inhomogeneous inclusions [J]. Journal of Mechanical Engineering, 2015, 51(02): 21-29.
[5] Yhland E M. Waviness measurement-an instrument for quality control in rolling bearing industry[C]. Proceedings of the Institution of Mechanical Engineers, Conference Proceedings, SAGE Publications, 1967: 438–445.
[6] Meyer L D, Weichbrodt B, Ahlgren F F. An analytic model for ball bearing vibrations to predict vibration response to distributed defects[J]. ASME Journal of Mechanical Design, 1980, 102(2): 205–210.
[7] Wardle F P. Vibration forces produced by waviness of the rolling surfaces of thrust loaded ball bearings—part I: theory[J]. Proceedings of the Institution of Mechanical Engineers. Part C: Journal of Mechanical Engineering Science, 1988, 202(5): 305–312.
[8] Wardle F P. Vibration forces produced by waviness of the rolling surfaces of thrust loaded ball bearings—part II: experimental validation[J]. Proceedings of the Institution of Mechanical Engineers. Part C: Journal of Mechanical Engineering Science, 1988, 202(5): 313–319.
[9] Choudhury A, Tandon N. A theoretical model to predict vibration response of rolling bearings to distributed defects under radial load[J]. ASME Journal of Vibration and Acoustics, 1998, 120(1): 214–220.
[10] Aktürk N. The Effect of waviness on vibrations associated with ball bearings[J]. ASME Journal of Tribology, 1999, 121(4): 667–677.
[11] Harsha S P, Sandeep K, Prakash R. Non-linear dynamic behaviors of rolling element bearings due to surface waviness[J]. Journal of Sound and Vibration, 2004, 272(3): 557–580.
[12] Kankar P, Sharma S C, Harsha S. Nonlinear vibration signature analysis of a high speed rotor bearing system due to race imperfection[J]. Journal of Computational and Nonlinear Dynamics, 2012, 7(1): 011014.
[13] McFadden P D, Smith J D. Model for the vibration produced by a single point defect in a rolling element bearing[J]. Journal of Sound and Vibration, 1984, 96(1): 69–82.
[14] McFadden P D, Smith J D. The vibration produced by multiple point defects in a rolling element bearing[J]. Journal of Sound and Vibration, 1985, 98(2): 263–273.
[15] Zoladz T, Earhart E, Fiorucci T. Bearing defect signature analysis using advanced nonlinear signal analysis in a controlled environment[R]. NASA Technical Memorandum, 1995, 108491.
[16] Tandon N, Choudhury A. An analytical model for the prediction of the vibration response of rolling element bearings due to a localized defect[J]. Journal of Sound and Vibration, 1997, 205(3), 275–292.
[17] Sopanen J, Mikkola A. Dynamic model of a deep-groove ball bearing including localized and distributed defects. Part 1: Theory[J]. Proceedings of the Institution of Mechanical Engineers, Part K: Journal of Multi-body Dynamics, 2003, 217(3): 201–211.
[18] Sopanen J, Mikkola A. Dynamic model of a deep-groove ball bearing including localized and distributed defects. Part 2: Implementation and results[J]. Proceedings of the Institution of Mechanical Engineers, Part K: Journal of Multi-body Dynamics, 2003, 217(3): 213–223.
[19] Arslan H, Aktürk N. An investigation of rolling element vibrations caused by local defects[J]. ASME Journal of Tribology, 2008, 130(4): 1–12.
[20] Rafsanjani A, Abbasion S, Farshidianfar A, et al. Nonlinear dynamic modeling of surface defects in rolling element bearing systems[J]. Journal of Sound and Vibration, 2009, 319(3): 1150–1174.
[21] Kankar P K, Sharma S C, Harsha S P. Vibration based performance prediction of ball bearings caused by localized defects[J]. Nonlinear Dynamics, 2012, 69(3): 847–875.
[22] Patel V N, Tandon N, Pandey R K. A dynamic model for vibration studies of deep groove ball bearings considering single and multiple defects in races[J]. ASME Journal of Tribology, 2010, 13(11): 1–10.
[23] Wang W, Zhang S, Zhao Z, et al. Effect of the inhomogeneity in races on the dynamic behavior of rolling bearing[J]. ASME Journal of Vibration and Acoustics, 2015, 137(6): 061015.
[24] 徐可君,董芳华,秦海勤. 有局部缺陷的滚动体中介轴承动力学建模及仿真研究[J]. 振动与冲击,2016,35(2):104-109.
XU Ke-jun, DONG Fang-hua, QIN Hai-qin. Dynamics modeling and simulation on intershaft bearing with local defect rolling element[J]. Journal of vibration and shock, 2016, 35(2): 104-109.
[25] 剡昌锋,苑浩,王鑫,等. 点接触弹流润滑条件下的深沟球轴承表面局部缺陷动力学建模[J]. 振动与冲击,2016,35(14):61-70.
YAN Chang-feng, YUAN Hao, WANG Xin, et al. Dynamics modeling on local defect of deep groove ball bearing under point contact elasto-hydrodynamic lubrication condition [J]. Journal of vibration and shock, 2016, 35(14): 61-70.
[26] Tiwari M, Gupta K. Effect of radial internal clearance of a ball bearing on the dynamics of a balanced horizontal rotor[J]. Journal of Sound and Vibration, 2000, 238(5): 723-756.

PDF(847 KB)

Accesses

Citation

Detail

段落导航
相关文章

/