为了简单有效地模拟钢阻尼器在考虑水平2方向变形时的滞回性能，基于多重剪切弹簧力学模型和Menegotto-Pinto(MP)滞回模型提出一种改进的多重剪切弹簧（Modified Multi-Shear-Spring，MMSS)模型。将MP滞回模型作为MMSS模型中各弹簧的滞回曲线,其基本力学参数由钢阻尼器多方向的弹塑性变形性能确定，形状参数通过优化计算确定。以常用的U型钢阻尼元件为例，通过在单向循环位移、水平2方向规则循环位移以及随机位移下MMSS模型与阻尼器滞回曲线的比较，验证了提出的MMSS模型能较精确地模拟U型钢阻尼元件在考虑水平2方向变形时的滞回性能，为钢阻尼器的地震反应分析提供了一种简便的计算方法。
Abstract
In order to simply and effectively simulate hysteretic performance of steel dampers considering horizontal bidirectional deformations, a modified multi-shear spring (MMSS) model was proposed based on the multi-shear spring mechanical model and Menegotto-Pinto(MP) hysteretic model.MP model was taken as each springs’ hysteretic curve in MMSS model, and its basic mechanical parameters were determined with multi-directional elastoplastic deformations of steel dampers, its shape parameters were fitted by means of the self-adaptive genetic algorithm.Taking a commonly used U-shaped steel damper for example, through comparing the damper’s hysteretic curves under unidirectional cyclic displacements, horizontal bidirectional regular cyclic displacements and horizontal bidirectional random displacements obtained using finite element model and MMSS one, respectively, the results showed that MMSS model can accurately simulate hysteretic performance of the U-shaped damper considering horizontal bidirectional deformations, so the study provides a simple calculation method for steel dampers’ seismic response analysis.
关键词
钢阻尼器 /
水平2方向变形 /
滞回性能 /
多剪切弹簧力学模型 /
Menegotto-Pinto模型
{{custom_keyword}} /
Key words
steel damper /
horizontal bidirectional deformation /
hysteretic behavior /
Multi-Shear-Spring mechanical model /
Menegotto-Pinto model
{{custom_keyword}} /
{{custom_sec.title}}
{{custom_sec.title}}
{{custom_sec.content}}
参考文献
[1] 王彤,王炎,谢旭,等.不等高桥墩铁路减隔震桥梁钢阻尼支座地震易损性[J]. 浙江大学学报(工学版),2014,48(11):1909-1916.
WANG Tong，WANG Yan，XIE Xu，et al. Seimic fragility of steel damper bearings in isolated railway bridges with different-height piers[J]. Journal of Zhejiang University (Engineering Science),2014,48(11):1909-1916.
[2] WADA A, HIROSE K. Elasto-plastic dynamic behaviors of the building frames subjected to bi-directional earthquake motion[J]. Journal of Structural & Construction Engineering,1989(339):37-47.
[3] ITO M, FURUKAWA T, IZAWA K, et al. System Identification of Base-Isolated Building using Seismic Response Data[J]. Journal of Engineering Mechanics,2005,131(3):268-275.
[4] 藤田隆史，鈴木重信，藤田聡.建物免震用の高減衰積層ゴムに関する研究:第1報，履歴復元力の基本特性と解析モデル[J]. 日本機械学会論文集,C 編,1990,56:658-666.
TAKAFUMI F, SHIGENOBU S, SATOSHI F. High damping rubber bearings for seismic isolaiton of buildings:1st Report, Hysteretic restoring force characteristics and analitical models[J]. Transactions of the Japan Society of Mechanical Engineers,series C,1990,56:658-666.
[5] YAMAMOTO S, KIKUCHI M, M. UEDA M, et al. Analytical modeling of elastomeric isolation bearings under severe axial load and shear deformations[C]// Proceedings of 14th World Conference on Earthquake Engineering. Beijing:WCEE,2008.
[6] KIKUCHI M, NAKAMURA T, AIKEN I D. Three-dimensional analysis for square seismic isolation bearings under large shear deformations and and high axial loads[J]. Earthquake Engineering & Structural Dynamics,2010,39(13):1513-1531.
[7] KIKUCHI M, AIKEN I D, KASALANATI A. Simulation analysis for the ultimate behavior of full-scale lead-rubber seismic isolation bearings[C]//Proceedings of 15th World Conference on Earthquake Engineering. Portugal：WCEE,2012.
[8] ENE D, KISHIKI S, YAMADA S, et al. Experimental study on the bidirectional inelastic deformation capacity of U-shaped steel dampers for seismic isolated buildings[J]. Earthquake Engineering & Structural Dynamics,2016,45(2):173-192.
[9] ENE D, YAMADA S, JIAO Y, et al. Reliability of U-shaped steel dampers used in base-isolated structures subjected to biaxial excitation[J]. Earthquake Engineering & Structural Dynamics,2016,46:621-639.
[10] 細 政貴, 石田 孝德, 藤田 航平, et al. 統合地震シミュレータ(IES)の仮想構築モデルに導入するMSSモデルとその応用に関する基礎研究[J]. 日本地震工学会論文集,2015,15(7):295-305.
HOSO M, ISHIDA T, FUJITA K, et al. Fundamental study on Application of Multiple Shear Spring model to the virtual building model of Integrated Earthquake Simulator (IES)[J]. Proceedings of Japan Earthquake Engineering Symposium,2015,15(7):295-305.
[11] 董庆园，岡崎太一郎.多水平弹簧隔震支座模型在隔震建筑弹塑性时程分析中的应用[C]//工业建筑2015年增刊I：322-326.
DONG Qingyuan，OKAZAKI T. The application of multiple shear spring isolator model in elastoplastic time history analysis for seismically isolated building[C]// Industrial Construction 2015 Supplement I:322-326.
[12] 堺淳一，川岛一彦. 部分的な除荷、再載荷を含む履歴を表す修正Menegotto-Pintoモデルの提案[J]. 土木学会論文集.2003,738(738):159-169.
SAKAI J, KAWASHIMA K. Modification of the Giuffre，Menegotto and the Pinto model for unloading and reloading paths with small strain variations[J]. Transactions of Japan Society of Civil Engineers,2003,738(738):159-169.
[13] MAZZONI S, MCKENNA F, SCOTT M H, et al. OpenSees command language manual[M]. USA: Earthquake Engineering Research Center, 2006.
[14] 李晓章，谢旭，张鹤.桥梁拉索用CFRP线材阻尼特性试验研究和理论分析[J].工程力学，2015,32(1):176-182.
LI Xiao-zhang，XIE Xu，ZHANG He. Experimental and theoretical studies on the damping properties of CFRP wires used in bridge cables[J]. Engineering Mechanics,2015,32(1):176-182.
[15] XIE X,LI X. Genetic Algorithm-based tension identification of hanger by solving inverse eigenvalue problem[J].Inverse Problems in Science & Engineering, 2014, 22(6):966-987.
[16] DENG K, PAN P, SU Y, et al. Shape optimization of U-shaped damper for improving its bi-directional performance under cyclic loading[J]. Engineering Structures,2015,93:27-35.
[17] 王彤.桥梁结构钢材滞回本构模型改进及其应用研究[D].杭州:浙江大学,2016:36-38.
WAMG Tong. Improvement of the hysteretic constututive model for bridge structural steels and its application[D]. Hangzhou:Zhejiang University,2016:36-38.
{{custom_fnGroup.title_cn}}
脚注
{{custom_fn.content}}
PDF(2147 KB)
