聚能射流侵彻飞机铝合金蒙皮的仿真与实验研究

PDF(1342 KB)

振动与冲击 ›› 2019, Vol. 38 ›› Issue (4) : 184-190.

论文

董世康1，胡芳友1，崔爱永1，黄旭东2，刘茜2

作者信息 +

Simulation and experiments on shaped charge jets’ penetration into aircraft aluminum-alloy skin

DONG Shikang1,HU Fangyou1,CUI Aiyong1,HUANG Xudong2,LIU Qian2

Author information +

文章历史 +

摘要

为解决传统切割方法难以满足野外条件飞机蒙皮破孔损伤战场抢修要求的问题，提出利用装药聚能效应切割清理金属蒙皮受损区域的方法，开展了2mm厚2A12铝合金薄板聚能切割新工艺探索。将聚能切割技术的应用载体确定为内部装填黑索金、带有楔形凹槽的铅外壳金属管式切割索。利用ANSYS/LS-DYNA软件，构建了切割索侵彻铝合金板的有限元模型，运用正交设计法，分析了不同工艺参数组合下切割索的切割性能，对装药线密度、药型罩夹角、炸高3个影响因素进行了优化。经实验验证，数值计算与实验结果吻合良好，证明了有限元模型的准确性，并最终将聚能切割工艺确定为装药线密度1.5g/m、药型罩夹角80°、炸高0。原型实验表明，采用该参数的新型切割索在切割精度、异形切割等方面均符合飞机蒙皮破孔损伤战场抢修的工艺要求。

Abstract

Traditional cutting methods cannot meet the repair requirements of aircraft skin perforation damages under battlefield conditions.This article proposed a novel method to cut metal skin damage areas by taking advantage of the Munroe effect of charges.The authors conducted research on the new explosive cutting process using 2A12 aluminum plates of 2 mm thickness.The application carriers of the explosive cutting technology were lead-shell metal-pipe linear shaped charges with wedge-shaped grooves,and the cutters were filled up with hexogen (RDX).Based on the ANSYS/LS-DYNA,the finite element model of the linear shaped charge penetrating aluminum alloy plates was constructed.The cutting performances of linear shaped charges under different process parameter sets were analyzed using the orthogonal design method.Three influencing factors,including charge linear density,liner apex angle,and standoff were optimized.The numerical calculation results agree well with the experimental results,which indicates the favorable accuracy of the finite element model.In the end,the optimized explosive cutting process parameters were decided as a charge linear density of 1.5 g/m,a liner apex angle of 80°,and a standoff of 0.The prototype tests implies that new linear shaped charges adopting these parameters could meet the battlefield repair requirements of aircraft skin perforation damages in the aspects of cutting accuracy and abnormity cutting.

导出引用

董世康1，胡芳友1，崔爱永1，黄旭东2，刘茜2. 聚能射流侵彻飞机铝合金蒙皮的仿真与实验研究[J]. 振动与冲击, 2019, 38(4): 184-190

DONG Shikang1,HU Fangyou1,CUI Aiyong1,HUANG Xudong2,LIU Qian2 . Simulation and experiments on shaped charge jets’ penetration into aircraft aluminum-alloy skin[J]. Journal of Vibration and Shock, 2019, 38(4): 184-190

参考文献

[1] 胡芳友, 回丽, 易德先,等. 飞机损伤的激光抢修技术[J]. 中国激光, 2009, 36(9):2245-2250.
Hu Fangyou, Hui Li, Yi Dexian, et al. Laser repair of aircraft battle damage[J]. Chinese Journal of Laser, 2009, 36(9): 2245-2250.
[2] Dong Shikang, Hu Fangyou, Dong Xuhua. Experimental research on shaped charge cutting of aluminium alloy plates[C]//. Zhou Shiquan, Aragona Patty, Chen Shiming. Advances in Energy Science and Equipment Engineering - Proceedings of International Conference on Energy Equipment Science and Engineering, ICEESE 2015. Leiden: CRC Press/Balkema, 2015:2885-2888.
[3] Cui Aiyong, Hu Fangyou, Wei Huakai, et al. Research on rapid shaped-charge cutting technology of aircraft damaged thin-wall structures[J]. Strength of Materials, 2016, 48(1): 58-62.
[4] 屈璟林, 王宝兴, 李森元,等.柔性聚能切割技术在防盗门开窗中的应用研究[J]. 爆破器材, 2010, 39(6):26-29.
Qu Ginglin, Wang Baoxing, Li Senyuan, et al. Study on the application of the flexible shaped charge cutting technology in the channeling of metal safety doors[J]. Explosive Materials, 2010, 39(6):26-29.
[5] 王宝兴, 高强, 张双计,等.大巴车玻璃柔性聚能切割技术的应用研究[J]. 工程爆破,2014, 20(6):54-57.
Wang Baoxing, Gao Qiang, Zhang Shuangji, et al. Application research of flexible shaped cutting technology in bus glass[J]. Engineering Blasting, 2014, 20(6):54-57.
[6] 王耀华, 熊伟, 陈志富,等.线型聚能切割器装药线密度测量精确化研究[J]. 火工品,2012, (5):4-8.
Wang Yaohua, Xiong Wei, Chen Zhifu, et al. Research on the precise measurement of linear charge density of linear shaped charge[J]. Initiators & Pyrotechnics, 2012, (5):4-8.
[7] 封文春, 党晓民, 关焕文,等.飞机空中跳伞应急出口切割装置设计与试验[J]. 北京航空航天大学学报,2012,38(1): 11-16.
Feng Wenchun, Dang Xiaomin, Guan Huanwen, et al. Design and experiment of explosive cutting device of bail-out emergency exit[J]. Journal of Beijing University of Aeronautics and Astronautics, 2012, 38(1):11-16.
[8] 田涛, 陆明, 刘鹏,等.爆炸焊接在装备维修中的应用研究[J]. 张家口职业技术学院学报, 2008, 21(1):65-67.
Tian Tao, Lu Ming, Liu Peng, et al. Study on the application of explosive welding in equipment maintenance[J]. Journal of Zhangjiakou Vocational College of Technology, 2008, 21(1): 65-67.
[9] 周春华, 谭业发, 蔡立艮,等.爆炸焊接技术在装备抢修中的应用性分析[J]. 工程爆破, 2009, 15(3):81-83.
Zhou Chunhua, Tan Yefa, Cai Ligen, et al. Discussion of applicability of explosive welding technology to equipment rush repairing[J]. Engineering Blasting, 2009, 15(3):81-83.
[10] 王凯民. 火工品工程（下卷）——系统设计与试验检验[M]. 北京:国防工业出版社, 2014:371-373.
[11] Li Zhiqiang, Liu Xiaomin, Xiao Yin, et al. Splitting PMMA with mini cutting explosives [J]. Transactions of Tianjin University, 2006, 12 (Suppl.):219-222.
[12] 张凯, 李晓杰. 聚能线型切割器最佳张开角的理论分析[J]. 爆炸与冲击, 1988, 8(4):316-322.
Zhang Kai, Li Xiaojie. Theoretical analysis of the optimal opening angle of an explosive cutter[J]. Explosion and Shock Waves, 1988, 8(4):316-322.
[13] 李志强, 王志华, 刘晓明,等. 微爆索切割航空有机玻璃板实验研究[J]. 兵工学报, 2013, 34(8):970-974.
Li Zhiqiang, Wang Zhihua, Liu Xiaoming, et al. Experimental study of cutting PMMA plate with miniature detonation cord[J]. Acta Armamentarii, 2013, 34(8):970-974.
[14] 封文春. 航空应急救生系统[M]. 北京:国防工业出版社, 2014:55-60,157-163,197-202.
[15] 时党勇, 李裕春, 张胜民. 基于ANSYS/LS-DYNA 8.1 进行显式动力分析[M]. 北京:清华大学出版社, 2005:196-199, 327-330.
[16] 夏晓宇. 火工分离装置工作过程性能分析[D]. 长沙:国防科学技术大学, 2009.
Xia Xiaoyu. Performance analysis of separation pyrotechnics in the operation process[D]. Changsha: National University of Defense Technology, 2009.