基于晶振偏移补偿的机械振动WSN同步累积误差抑制方法

PDF(1566 KB)

振动与冲击 ›› 2019, Vol. 38 ›› Issue (6) : 132-136.

论文

鲜鸿宇，邓蕾，汤宝平，肖鑫

作者信息 +

Synchronous accumulated error suppression method based on the crystal offset compensation for mechanical vibration wireless sensor networks#br#

XIAN Hong-yu, DENG Lei, TANG Bao-ping, XIAO Xin

Author information +

文章历史 +

摘要

针对采用连续高频采样时钟模数转换器（ADC）的机械振动无线传感器网络（WSN）节点存在同步累积误差的问题，提出了一种基于晶振偏移补偿的同步累积误差抑制方法。基于连续高频采样时钟ADC的WSN节点，分析了同步累积误差产生原因；采用周期性信标中的帧起始界定符（SFD）信号作为同步信息，首先通过定时器1捕获的SFD信号间隔与参考SFD信号间隔差值确定晶振偏移补偿值，然后根据采样时钟与采样频率关系计算定时器2补偿后计数溢出值，最后由定时器2输出连续精准的高频采样时钟，消除节点间采样间隔差异，抑制同步累积误差。实验结果表明：连续采集40s，节点间最大同步误差为0.64s；连续采集同一信号源25s，节点间无明显相位误差，验证了该晶振偏移补偿方法抑制机械振动无线传感器网络同步累积误差的有效性。

Abstract

Aiming at the synchronous accumulated error at the nodes of mechanical vibration wireless sensor networks which adopt continuous high frequency sampling clock analog-to-digital converter (ADC), a synchronous accumulated error suppression method based on crystal offset compensation was proposed. The reason of synchronous accumulated error was analyzed. The start of frame delimiter (SFD) signal in the periodic beacon was used as the synchronization information. First, the compensation value of the crystal oscillator offset was determined according to the difference between the SFD signal interval captured by the timer 1 and the reference SFD signal interval. Then, according to the relationship between the sampling clock and the sampling frequency, the count overflow value after the compensation of the timer 2 was calculated. Finally, a continuously accurate high-frequency sampling clock was output by the timer 2, which eliminates the difference of sampling intervals between nodes and suppresses the synchronous accumulated error. The experimental results show that the maximum synchronization error between nodes when is 0.64 μs in 40 s continuous acquisition and there is no significant phase error between nodes when sampling the same signal source in 25 s continuous acquisition. The results indicate that the method based on crystal offset compensation can suppress effectively the synchronous accumulated error of the mechanical vibration wireless sensor networks.

导出引用

鲜鸿宇，邓蕾，汤宝平，肖鑫. 基于晶振偏移补偿的机械振动WSN同步累积误差抑制方法[J]. 振动与冲击, 2019, 38(6): 132-136

XIAN Hong-yu, DENG Lei, TANG Bao-ping, XIAO Xin. Synchronous accumulated error suppression method based on the crystal offset compensation for mechanical vibration wireless sensor networks#br#[J]. Journal of Vibration and Shock, 2019, 38(6): 132-136

参考文献

[1] 汤宝平，黄庆卿，邓蕾，等. 机械设备状态监测无线传感器网络研究进展[J]. 振动. 测试与诊断，2014, 34(1): 1-7.
Tang B, Huang Q, Lei D, et al. Research Progress and Challenges of Wireless Sensor Networks for Machinery Equipment Condition Monitoring[J]. Zhendong Ceshi Yu Zhenduan/journal of Vibration Measurement & Diagnosis, 2014, 34(1):1-7.
[2] Guo-Jin, Feng, James, et al. Implementation of Envelope Analysis on a Wireless Condition Monitoring System for Bearing Fault Diagnosis[J]. International Journal of Automation and Computing, 2015, 12(1):14-24.
[3] Bengherbia B, Zmirli M O, Toubal A, et al. FPGA-based wireless sensor nodes for vibration monitoring system and fault diagnosis[J]. Measurement, 2017, 101:81-92.
[4] 施毅, 张巍, 孙可,等. 地铁列车振动环境响应的无线传感器网络快速评定[J]. 振动与冲击, 2017, 36(2):229-234.
Shi Y, Zhang W, Sun K, et al. Fast assessment of ambient responses induced by subway train vibration using wireless sensor networks[J]. Journal of Vibration & Shock, 2017, 36(2):229-234.
[5] Araujo A, Garcia-Palacios J, Blesa J, et al. Wireless Measurement System for Structural Health Monitoring With High Time-Synchronization Accuracy[J]. IEEE Transactions on Instrumentation & Measurement, 2012, 61(3):801-810.
[6] 程利军, 张英堂, 李志宁,等. 基于时频分析及阶比跟踪的曲轴轴承故障诊断研究[J]. 振动与冲击, 2012, 31(19):73-78.
Cheng L J, Zhang Y T, Zhi-Ning L I, et al. Fault diagnose of an engine's main bearing based on time-frequency analysis and order tracking[J]. Journal of Vibration & Shock, 2012, 31(19):73-78.
[7] Mohanty S, Gupta K K, Raju K S. Vibration Feature Extraction and Analysis of Industrial Ball Mill Using MEMS Accelerometer Sensor and Synchronized Data Analysis Technique ☆[J]. Procedia Computer Science, 2015, 58:217-224.
[8] 裴勇, 汤宝平, 邓蕾,等. 基于信标时序补偿的机械振动无线传感器网络同步触发方法[J]. 振动与冲击, 2014, 33(3):57-62.
Pei Y, Tang B P, Deng L, et al. A WSN mechanical vibration synchronous acquisition trigger protocol based on beacon timing compensation[J]. Journal of Vibration & Shock, 2014, 33(3):57-62.
[9] Wu Y C, Chaudhari Q, Serpedin E. Clock Synchronization of Wireless Sensor Networks[J]. IEEE Signal Processing Magazine, 2011, 28(1):124-138.
[10] 王洋, 袁慎芳, 董晨华,等. 一种无线传感器网络分布式连续数据采集系统的同步方法[J]. 东南大学学报(自然科学版), 2011, 41(1):25-30.
Yang W. Synchronous method of wireless sensor network for distributed continuous data acquisition system[J]. Journal of Southeast University, 2011, 41(1):25-30.
[11] 黄庆卿, 汤宝平, 邓蕾,等. 机械振动无线传感器网络跨层步采集方法[J]. 仪器仪表学报, 2014, 35(5):1143-1148.
Huang Q, Tang B, Lei D, et al. Synchronous acquisition method based on cross-layer design for machine vibration wireless sensor networks[J]. Chinese Journal of Scientific Instrument, 2014, 35(5):1143-1148.
[12] Huang Q, Tang B, Deng L. Development of high synchronous acquisition accuracy wireless sensor network for machine vibration monitoring[J]. Measurement, 2015, 66:35-44.
[13] Xiao X, Tang B, Deng L. High accuracy synchronous acquisition algorithm of multi-hop sensor networks for machine vibration monitoring[J]. Measurement, 2017, 102:10-19.
[14] 曾贵伟, 汤宝平, 邓蕾,等. 机械振动无线传感器网络节点高精度数据采集方法[J]. 振动与冲击, 2016, 35(16):59-63.
Zeng G, Tang B, Lei D, et al. A high precision method for mechanical vibration data acquisition based on wireless sensor networks node[J]. Journal of Vibration & Shock, 2016.