基于二维等效FE-SEA混合方法的复合材料层合板传声损失分析

王晨,燕群,周红卫,慕琴琴

振动与冲击 ›› 2020, Vol. 39 ›› Issue (11) : 226-231.

PDF(1515 KB)
PDF(1515 KB)
振动与冲击 ›› 2020, Vol. 39 ›› Issue (11) : 226-231.
论文

基于二维等效FE-SEA混合方法的复合材料层合板传声损失分析

  • 王晨,燕群,周红卫,慕琴琴
作者信息 +

Transmission loss analysis for composite laminates based on two-dimensional equivalent hybrid FE-SEA method

  • WANG Chen, YAN Qun, ZHOU Hongwei, MU Qinqin
Author information +
文章历史 +

摘要

为研究湍流脉动噪声激励下复合材料层合板的传声特性,首先基于一般层合板理论将复合材料层合板等效为单层各向异性板,进而采用FE-SEA混合方法研究其传声损失。同时开展复合材料层合板传声损失试验,并将FE-SEA结果和统计能量法(SEA)结果以及实验值进行对比分析。研究结果表明:FE-SEA结果和实验值整体上分布趋势一致,而且误差也相对较小,其中3000Hz~10000Hz误差在2dB以内,但由于刚度等效导致2000Hz附近结果误差相对较大。相较于SEA方法, FE-SEA混合方法综合考虑了复合材料层合板边界条件和详细得几何特征,不仅可以准确地计算复合材料层合板的固有特性,而且使得传声损失结果在全频带内与试验值吻合得更好。因此本文建立的二维等效FE-SEA混合模型可以准确预示复合材料层合板在湍流脉动噪声激励下的传声损失。

Abstract

In order to study the transmission loss of composite laminates under turbulent pulsating noise excitation. Firstly, the composite laminates are equivalent to a single-layer isotropic panel based on general laminate theory, and the hybrid FE-SEA method is used to research the transmission loss of composite laminates. At the same time, the transmission loss experiment is carried out, and the results of hybrid FE-SEA method are compared with SEA and experimental results. The results showed that the hybrid FE-SEA results are consistent with the distribution trend of experimental results and the error is relatively small. The error of 3000Hz~10000Hz is within 2dB, but the equivalent of stiffness leads to a relatively large error around 2000Hz. Compared with the SEA method, the hybrid FE-SEA method comprehensively considers the boundary conditions and the detailed geometric features of the composite laminates. It can not only accurately calculate the inherent characteristics of the composite laminates, but also make the results of transmission loss well consistent with the experimental values in the whole frequency band. Therefore, the two-dimensional equivalent FE-SEA hybrid model established in this paper can accurately predict the transmission loss of composite laminates under turbulent pulsating noise excitation.

关键词

湍流脉动噪声 / 复合材料层合板 / FE-SEA混合方法 / 等效刚度 / 传声损失

Key words

turbulent pulsating noise / composite laminates / hybrid FE-SEA method / equivalent stiffness / transmission loss

引用本文

导出引用
王晨,燕群,周红卫,慕琴琴. 基于二维等效FE-SEA混合方法的复合材料层合板传声损失分析[J]. 振动与冲击, 2020, 39(11): 226-231
WANG Chen, YAN Qun, ZHOU Hongwei, MU Qinqin. Transmission loss analysis for composite laminates based on two-dimensional equivalent hybrid FE-SEA method[J]. Journal of Vibration and Shock, 2020, 39(11): 226-231

参考文献

[1]  BHAT W V. Flight test measurement of exterior turbulent boundary layer pressure fluctuations on Boeing model 737 airplane[J]. Journal of Sound and Vibration, 1971,14(4):439-457.
 [2] MIXSON J S, WILBY J F. Interior noise[C]//Aeroacoustics of Flight Vehicles: Theroy and Practice. Volume 2: Noise Control. 1991, 2: 271-355.
[3]  Li X, Yu K, Rui Z, et al. Sound transmission loss of composite and sandwich panels in thermal environment [J]. Composites Part B Engineering, 2017, 133:1-14.
[4] STEPHEN A H,SHUNG H S, DONALD J N. Engineering vibro-acoustic analysis: methods and applications [M]. UK: John wiley & sons, 2016.
[5]  Zhou R, Crocker M J. Sound transmission loss of foam-filled honeycomb sandwich panels using statistical energy analysis and theoretical and measured dynamic properties [J]. Journal of Sound and Vibration, 2010,329(6):673-686.
[6] Wang T, Li S, Rajaram S, et al. Predicting the sound transmission loss of sandwich panels by  statistical energy analysis approach[J]. Journal of Vibration and Acoustics, 2010,132(1):1-7.
[7]  韩敬永. 复合材料夹层板结构热环境下声振特性研究 [D].哈尔滨工业大学, 2016.
    Han Jing-yong. Vibro-acoustic characteristics of composite sandwich panel structures under thermal environments [D]. Harbin Institute of Technology, 2016.
[8]  Lyon R H. Theory and application of statistical energy analysis [M]. 2nd ed. Boston: Butterworth-Heinemann, 1995.
[9]  Shorter P J , Langley R S . On the reciprocity relationship between direct field radiation and diffuse reverberant loading [J]. Journal of the Acoustical Society of America, 2005, 117(1):85-95.
[10] Yuan C , Bergsma O , Beukers A . Sound Transmission Loss Prediction of the Composite Fuselage with Different Methods [J]. Applied Composite Materials, 2012, 19(6):865-883.
 [11] 陈书明, 王登峰, 宋学伟, 等. 基于FE-SEA混合方法的声腔内部噪声预测 [J]. 振动与冲击, 2010, 29(10):236-238.
CHEN Shu-ming, WANG Deng-feng , SONG Xuewei et al. Interior noise prediction of a sound cavity based on hybrid FE-SEA method [J]. Journal of vibration and shock, 2010, 29(10):236-238.
[12]  贺岩松, 张辉, 夏小均, 等. 基于 FE-SEA 混合法的车身板件降噪分析 [J]. 振动与冲击, 2016, 35(23):234-239.
HE Yan-song, ZHANG Hui, XIA Xiao-jun, et al. Noise reduction analysis for car body panels based on hybrid FE-SEA method [J]. Journal of vibration and shock, 2016, 35(23):234-239.
[13]  彭子龙. 基于FE-SEA混合法的板筋结构隔声与振动特性研究[D].江苏科技大学, 2014.
Peng Zi-long. Study on the sound insulation and vibration characteristics of sheet-beam structure based on hybrid FE-SEA method [D].Jiangsu University of science and Technology, 2014
 [14] Zhou R, Crocker M J. Sound transmission loss of foam-filled honeycomb sandwich panels using statistical energy analysis and theoretical and measured dynamic properties. Journal of Sound and Vibration, 2010, 329: 673-686.
[15] 沈关林,胡更开. 复合材料力学[M]. 北京:清华大学出版社,  2006.
SHEN Guan-lin, HU Geng-kai. Mechanics of Composite   Materials[M]. Beijing: Tsinghua university Press, 2006.
 [16] Langley R, Cordioll J. Hybrid deterministic-statistical analysis of vibro-acoustic systems with domain couplings on statistical components [J]. Journal of Sound and Vibration, 2009, 321(3):893-912.
[17] Iii J A M. Engineering Noise Control: Theory and Practice, 2nd Edition by David A. Bies and Colin H. Hansen [J]. Noise Control Engineering Journal, 1997.
[18] GB/T 19889.4-2005, 声学 建筑和建筑构件隔声测量 第4部分:房间之间空气声隔声的现场测量[S].
 

PDF(1515 KB)

Accesses

Citation

Detail

段落导航
相关文章

/