铝蜂窝夹芯复合结构在航空工业、高速列车及汽车车体中得到越来越多的应用,其隔声性能对车内及机舱噪声有重要影响。本文建立了碳纤维铝蜂窝夹芯复合结构有限单元模型,用有限单元法计算了结构在声载荷激励下的响应,并计算分析了复合结构的隔声性能,分析了碳纤维复合面板厚度、面板层数、铺设角度、铝蜂窝芯层的厚度、铝蜂窝壁厚对隔声性能的影响。研究结果表明,面板采用碳纤维复合结构时,在小于1000Hz的低频段,相同面板厚度的铝蜂窝复合结构隔声性能比全铝合金材料的铝蜂窝夹芯复合结构有所降低,而且在高频段会出现隔声量更低的隔声低谷;相较于铝合金面板,复合结构的面板采用碳纤维复合材料时,能够实现整体结构轻量化也提高复合结构的隔声性能;各层之间按相对90度铺设时复合结构隔声性能最好;随着面板厚度的增加复合结构隔声性能增加,面板层总厚度不变的情况下,单层面板或者过多的层数都会使复合结构隔声性能降低。
Abstract
Aluminum honeycomb sandwich composite structures are increasingly used in the aviation industry, high-speed trains and automobile bodies. Its sound insulation performance has an important impact on the cabin and interior noise. In this paper, a finite element model of sandwich composite structure with the carbon fiber panels and aluminum honeycomb core is established. The response of structures excited by acoustic loads are achieved by using of the finite element method, and the sound insulation performance of the composite structure are calculated and analyzed, the influence of panel layer number, laying angle, thickness of carbon fiber panel on sound insulation performance are analyzed and compared, the thickness of aluminum honeycomb core layer and aluminum honeycomb wall thickness on sound insulation performance are also analyzed and compared. The results show that the sound insulation of aluminum honeycomb composite structure with carbon fiber panels is lower than that of aluminum honeycomb sandwich structure with the aluminium material panels at low frequencies smaller than 1000Hz, and at high frequencies, there is a more lower level of sound insulation at the sound insulation trough with the same panel thickness. Compared with the aluminum alloy panel, when the composite structure panel is made of carbon fiber composite material, the overall structure can be lightened and the sound insulation performance of the composite structure can be improved.The sound insulation of the composite structure is the best when the layers are laid at relative 90 degrees, with the increase of the thickness of the panel, the sound insulation level of the composite structure increases. When the total thickness of the panel layer remains unchanged, single-layer panels or panels with too many layers will reduce the sound insulation level.
关键词
复合结构 /
碳纤维 /
铝蜂窝夹芯 /
有限元 /
隔声
{{custom_keyword}} /
Key words
complex structure /
carbon fibre panel /
aluminum honeycomb core /
finite element /
sound insulation
{{custom_keyword}} /
{{custom_sec.title}}
{{custom_sec.title}}
{{custom_sec.content}}
参考文献
[1] 谢桂兰,贺礼财,肖春芽. 基于BP网络的蜂窝铝芯力学性能预测与灵敏度分析. 材料导报B, 2014, 28(12): 144-148.
Xie Guilan, He Licai, Xiao Chunya. Mechanical Properties Predication and Sensitivity Analysis for Alumunum Honeycomb Core Structure Based on BP Neural Network. Material Review B, 2014,28(12):144-148.
[2] 蔡园武,徐亮,程耿东.正六角形单胞周期性蜂窝板等效刚度研究. 大连理工大学学报,2014,54(4):377-383.
Cai Yuanwu,Xu Liang,Cheng Gengdong. Study of effective stiffnesses of periodic honeycomb plate with regular hexagonal unit cell. Journal of Dalian University of Technology, 2014,54(4):377-383.
[3] 丁叁叁,田爱琴,李睿.高速列车串行铝蜂窝吸能结构的轴向冲击动力学响应. 中南大学学报,2016, 47(5):1782-1787.
DING Sansan, TIAN Aiqin, LI Rui. Dynamic characteristics of serial honeycomb structure under high-speed impact. Journal of Central South University, 2016,47(5):1782-1787.
[4] 赵林虎,周丽.复合材料蜂窝夹芯结构低速冲击位置识别研究.振动与冲击,2012,31(2):67-71.
ZHAO Lin-hu,ZHOU Li.Localization of low-velocity impact on a composite honeycomb sandwich structure.Journal of Vibration & Shock,2012,31(2):67-71.
[5] 张丽荣,陈煜,张娟歌.复合材料结构部件在高速动车组上的应用研究及性能评价. 电力机车与城轨车辆,2015, 38(6):29-33.
Zhang Lirong, Chen Yu, Zhang Juange. Research on application of composite material structural parts on high speed EMU and its performance valuation. Electric Locomotives & Mass Transit Vehicles. 2015, 38(6):29-33.
[6] 罗晰昱,罗益锋.国外高性能纤维及其复合材料在高速列车的应用[J]. 高科技纤维与应用,2011,36(5):33-41.
LUO Ximin,LUO Yifeng.The Application of Several High Performance Fibers and Composite Materials in High Speed Train both in Abroad and Home.Hi-Tech Fiber & Application. 2011,36(5):33-41.
[7] 刘宇,徐亚之,周圣卫.有轨电车碳纤维复合材料枕梁结构研究. 新技术新工艺,2017,6:11-14.
Liu Yu, Xu Yazhi,Zhou Shengwei. A Study on Troller Bolster Structure of Carbon Fiber Composite Materials. New Technology & New Process, 2017,6:11-14.
[8] Jung-Seok Kim, Seong-Kyun Chung. A study on the low-velocity impact response of laminates for composite railway bodyshells. Composite Structures, 2007,77: 484–492.
[9] 王非,许文彬,周秀燕.碳纤维蒙皮/铝蜂窝夹层材料的埋件结构破坏形式分析. 纤维复合材料,2015,2:30-33.
WANG Fei,XU Wenbin,ZHOU Xiuyan. Failure Mode Analysis of Embedded Structure in Carbon Fiber Skins /Aluminum Honeycomb Sandwich Material.Fiber Composites,2015,2:30-33.
[10] 刘杰,郝巍,孟江燕. 蜂窝夹层结构复合材料应用研究进展. 宇航材料工艺, 2013, 3:25-29.
Liu Jie Hao, Wei Meng ,Jiangyan. Progress in Applied Research of Honeycomb Sandwich Composites. Aerospace Materials & Technology, 2013, 3:25-29.
[11] 丁叁叁,田爱琴,王建军.高速动车组碳纤维复合材料应用研究. 电力机车与城轨车辆,2015,38(6):1-8.
DING Sansan,TIAN Aiqin, WANG Jianjun. Research on application of carbon fiber composite in high speed EMUs. Electric Locomotives & Mass Transit Vehicles. 2015, 38(6):1-8.
[12] Jung-Seok Kim, Jong-Cheol Jeong. Natural frequency evaluation of a composite train carbody with length of 23m. Composites Science and Technology, 66 2006, 66:2272–2283.
[13] 任鹏,张伟,刘建华,等.水下冲击波作用的铝合金蜂窝夹层板动力学响应研究.振动与冲击,2016,35(2):7-11.
REN Peng,ZHANG Wei,LIU Jian-hua,,et al.Dynamic analysis of aluminium alloy honeycomb core sandwich panels subjected to underwater shock loading.Journal of Vibration & Shock,2016,35(2):7-11.
[14] Zhou R, Crocker MJ. Sound transmission loss of foam-filled honeycomb sandwich panels using statistical energy analysis and theoretical and measured dynamic properties. Journal of Sound and Vibration, 2010, 329: 673-686.
[15] Palumbo D, Klos J. The e_ects of voids and recesses on the transmission loss of honeycomb sandwich panels. Noise Control Engineering Journal, 2011, 59 (6): 631-640.
[16] Xin FX,Lu TJ. E_ects of core topology on sound Insulation performance of lightweight all-metallic sandwich panels. Materials and Manufacturing Processes, 2011, 26(9): 1213-1221.
[17] 任树伟,辛锋先,卢天健.蜂窝层芯夹层板结构振动与传声特性研究. 力学学报, 2013,45(3): 349-358.
Ren Shuwei, Xin Fengxian, Lu Tianjian. Vibroacoustic Performance of Simply Supported Honeycomb Sandwich Panels. Theoretical and Applied Mechanics, 2013,45(3): 349-358.
[18] 赵宏杰, 嵇培军, 胡本慧.蜂窝夹层复合材料的吸波性能. 宇航材料工艺, 2010, 40(2):72-74.
Zhao Hongjie,Ji Peijun,Hu Benhui,ect.Absorbing Properties of Honeycomb Sandwich Composites.Aerospace Materials & Technology,2010, 40(2):72-74.
[19] 建筑隔声评价标准:GB/T 50121-2005[S].北京:中国标准出版社,2005.
{{custom_fnGroup.title_cn}}
脚注
{{custom_fn.content}}