摆动支承式汽车衡动态称重的缓冲减振研究

PDF(1567 KB)

振动与冲击 ›› 2020, Vol. 39 ›› Issue (17) : 226-233.

论文

摆动支承式汽车衡动态称重的缓冲减振研究

赖朝晖1 ，杨晓翔1，2，姚进辉3，赖征创1，3

作者信息 +

Buffer and vibration reduction of dynamic weighing of truck scale with swing support

LAI Chaohui1， YANG Xiaoxiang1,2， YAO Jinhui3， LAI Zhengchuang1,3

Author information +

文章历史 +

摘要

为了克服高速公路计重收费系统非正常行车的逃票行为和称重精度不满足连续动态称重的需求，对摆动支承式汽车衡的动态称重过程进行了动力学分析，得到车辆不规范行车状态下的轴重变化。根据柱式负荷传感器的摆动支承振动特性，分别在检定工况和使用工况下对给定参数的双轴刚性车的动态称重过程进行数值仿真，得到车辆轴载的称重误差。考虑电阻应变式负荷传感器的全桥测量特性，针对顶撞式限位的使用缺陷设计了一种缓冲限位减振装置；双轴刚性车在使用工况下的称重误差结果显示，该装置能实现快速稳定秤体、减小冲击、提高称重精度和稳定性。

Abstract

In order to overcome ticket evasion behavior under abnormal driving conditions and weighing accuracy being not able to meet needs of continuous dynamic weighing in highway weighing toll system, the dynamic weighing process of a truck scale with swing support was analyzed, and the variation of axle loads under abnormal driving conditions was obtained. According to swing support’s vibration characteristics of column load sensor, numerical simulation was performed for dynamic weighing process of two-axle rigid vehicle with given parameters under verification condition and working one, respectively to obtain weighing error of vehicle axle load. Considering full electrical-bridge measurement characteristics of resistance strain type load sensor, aiming at use defects of the head impact limit, a vibration reduction device of buffer limit was designed. The weighing error results of a two-axle rigid vehicle under working conditions showed that the designed device can quickly stabilize scale body, reduce impact, and improve weighing accuracy and stability.

导出引用

赖朝晖1,杨晓翔1，2，姚进辉3，赖征创1，3. 摆动支承式汽车衡动态称重的缓冲减振研究[J]. 振动与冲击, 2020, 39(17): 226-233

LAI Chaohui1， YANG Xiaoxiang1,2， YAO Jinhui3， LAI Zhengchuang1,3. Buffer and vibration reduction of dynamic weighing of truck scale with swing support[J]. Journal of Vibration and Shock, 2020, 39(17): 226-233

参考文献

[1] 王磊. 货车不停车计重收费系统（EWTC）研究[D]. 西安:长安大学,2016.
[2] 朱国伟,范长江,周骥,等. 浅谈动态汽车衡发展史[J]. 中国交通信息化, 2016(7): 98-99.
ZHU Guowei, FAN Changjiang, ZHOU Ji, et al. A brief talk on the development history of dynamic truck scale[J]. Transportation Information Industry, 2016 (7): 98-99.
[3] 王磊,尹燕,周伟,等. 重载高速公路智能化不停车计重收费系统研究[J]. 公路, 2017, 62(3): 154-160.
WANG Lei, YIN Yan, ZHOU Wei, et al. Research on intelligent electronic weight tolling system for heavy loaded vehicles [J]. Highway, 2017, 62(3): 154-160.
[4] O’CONNOR T, J. O’Brien E J, Jacob B. An experimental investigation of spatial repeatability[J]. International Journal of Heavy Vehicle Systems, 2000, 7(1): 64-81.
[5] 邓露,施海,何维等. 基于虚拟简支梁法的桥梁动态称重研究[J]. 振动与冲击, 2018, 37 (15): 209-215.
DENG Lu, SHI Hai, HE Wei, et al. Vehicles’ BWIM based on virtual simply-supported beam method [J]. Journal of Vibration and Shock, 2018, 37(15): 209-215.
[6] 王宁波,任伟新,万华平. 基于动应变的桥梁动态称重及其优化算法[J]. 振动与冲击, 2013, 32(4): 116-120.
WANG Ningbo, REN Weixin, WAN Huaping. Bridge weigh-in-motion and its optimization algorithm based on dynamic strain [J]. Journal of Vibration and Shock, 2013, 32(4): 116-120.
[7] HENAU A D. Weigh-in-motion of wheel, axle and vehicle loads[J]. International Journal of Heavy Vehicle Systems, 1994, 1(2): 170-181.
[8] GAJDA J, BURNOS P, SROKA R. Accuracy assessment of weigh-in-motion systems for vehicle’s direct enforcement [J]. IEEE Intelligent Transportation Systems Magazine, 2018, 10(1): 88-94.
[9] 张波,鲁新光,邓铁六,等. 动态车辆称重物理模型及提高称重准确度研究[J]. 计量学报, 2009, 30(5): 426-430.
ZHANG Bo, LU Xinguang, DENG Tieliu, et al. Study on a physical model of moving vehicle weighing and its accuracy improvement[J]. Acta Metrologica Sinica, 2009, 30(5): 426-430.
[10] 赖朝晖,杨晓翔,姚进辉,等. 柱式负荷传感器的摆动支承振动分析[J]. 噪声与振动控制, 2019, 39(1): 46-51.
LAI Chaohui, YANG Xiaoxiang, YAO Jinhui, et al. Pendulum support vibration analysis of column load sensors [J]. Noise and Vibration Control, 2019, 39(1): 46-51.
[11] PROZZI J A, HONG F. Effect of weigh-in-motion system measurement errors on load-pavement impact estimation [J]. Journal of Transportation Engineering, 2007, 133(1): 1-10.
[12] JJG 907-2006 动态公路车辆自动衡器计量检定规程[S]. 北京: 中国计量出版社, 2006.
[13] 王磊,尹燕,周伟,等. 高精度阵列式压电石英动态称重系统研究[J]. 中国公路学报, 2016, 29(5): 137-143.
WANG Lei, YIN Yan, ZHOU Wei, et al. Study on dynamic weighing system of high precision array piezoelectric quartz[J]. China Journal of Highway and Transport, 2016, 29(5): 137-143.
[14] 肖润谋,陈李军,韩海伟. 高速公路货车不规范过秤模拟试验及质量恢复方法[J]. 中国公路学报, 2011, 24(4): 87-93.
XIAO Runmou, CHEN Lijun, HAN Haiwei. Simulation test and mass recovery method of passing mass platform non-normative of trucks on expressway [J]. China Journal of Highway and Transport, 2011, 24(4): 87-93.
[15] 和海芳,程寿山,樊平. 车辆荷载中车辆允许通过总重值的研究 [J]. 公路交通科技（应用技术版）, 2013(5): 124-127.
HE Haifang, CHEN Shoushan, FAN Ping. Study on the allowable gross weight of vehicles under vehicle load [J]. Journal of Highway and Transportation Research and Development (Applied Technology), 2013(5): 124-127