微量注射泵用直线超声电机的结构设计

李南安,姚志远,张百亮

振动与冲击 ›› 2020, Vol. 39 ›› Issue (2) : 223-226.

PDF(1386 KB)
PDF(1386 KB)
振动与冲击 ›› 2020, Vol. 39 ›› Issue (2) : 223-226.
论文

微量注射泵用直线超声电机的结构设计

  • 李南安,姚志远,张百亮
作者信息 +

Structural design of a linear ultrasonic motor used to drive a microsyringe pump

  • LI Nan’an, YAO Zhiyuan, ZHANG Bailiang
Author information +
文章历史 +

摘要

改进了一种螺纹杆直线超声电机,并用于驱动微量注射泵。螺纹杆直线超声电机具有体积小、精度高、推力足、无磁干扰等特点。为了满足微量注射泵推力要求,针对螺纹杆直线超声电机不能施加预压力问题,提出了一种可施加预压力的螺纹杆直线超声电机。该直线超声电机包括底座、柱状定子、分体式螺纹杆动子。动子由动子主轴、套筒、预压力施加装置组成。当预压力调至33.9 N时,电机达到最大堵推力21 N,此时空载最大速度为4.5 mm/s。并设计了一款微量注射泵,该微量注射泵结构简单、抗磁干扰,分辨率达到nl级别,满足各种微量药物注射要求。

Abstract

A lead screw linear ultrasonic motor was improved and used to drive a microinjection pump.The improved lead screw linear ultrasonic motor has the characteristics of small size, high precision, sufficient thrust, and no magnetic interference.In order to meet the thrust requirement of the microinjection pump, a pre-stressed lead screw linear ultrasonic motor was designed for making the pre-pressure be able to apply on the threaded rod linear ultrasonic motor.The linear ultrasonic motor includes a base, a columnar stator, and a split type threaded rod rotor.The rotor is composed of a rotor spindle, a sleeve, and a pre-pressure application device.When the pre-pressure is adjusted to 33.9 N, the motor reaches a maximum plug thrust of 21 N, and the maximum no-load speed is 4.5 mm/s.The microinjection pump has simple structure and anti-magnetic interference property, and the accuracy reaches nl level, which meets various trace drug injection requirements

关键词

超声电机 / 预压力施加装置 / 微量注射泵

Key words

ultrasonic motor / pre-pressure application device / micro-injection pump

引用本文

导出引用
李南安,姚志远,张百亮. 微量注射泵用直线超声电机的结构设计[J]. 振动与冲击, 2020, 39(2): 223-226
LI Nan’an, YAO Zhiyuan, ZHANG Bailiang. Structural design of a linear ultrasonic motor used to drive a microsyringe pump[J]. Journal of Vibration and Shock, 2020, 39(2): 223-226

参考文献

[1] 郭应美. 微量注射泵在尼莫地平静脉给药中的应用[J]. 基层医学论坛,2005,9(5):443-443.
GUO Yingmei. The application of micro-injection pump in Nimodipine administration through vein[J]. PUBLIC MEDICAL FORUM MAGAZINE,2005,9(5): 443-443.
[2] 陈曦,王清,蔡姗姗. 微量注射泵的设计与实现. 化工自动化及仪表,2014 ,3(41) :290-293 .
CHEN Xi,WANG Qing,CAI Shanshan. Design and Implementation of Micro-injection Pumps[J]. Control and Instruments in Chemical Industry,2014,3(41): 290-293
[3] 张红梅. 应用不同品牌注射器对微量注射泵输注精度影响的研究进展[J]. 医疗卫生装备,2016,37(2):121-123.
ZHANG Hong-mei. Research progress of effect of brands of syringes on infusion accuracy of micro-injection pump[J]. Chinese Medical Equipment Journal, 2016,37(2):121-123.
[4] 刘坤涛,周丽华,李华峰等. 用于磁共振成像高压注射器的超声电动机的研究[J]. 医疗卫生装备,2011,32(3):15-19.
LIU Kuntao,ZHOU Lihua,LI Huafeng,et al. Study on Ultrasonic Motor for MRI Injectors[J]. Chinese Medical Equipment Journal,2011,32(3):15-19
[5] Kar, S, McWhorter, S, Ford, S.M, et al. Piezoelectric mechanical pump with nanoliter per minute pulse-free flow delivery for pressure pumping in micro-channels[J]. Analyst, 1998, 123(7):1435-1441.
[6] Hejun Du. A digital miniature pump for medical applications[J]. IEEE/ASME Transactions on Mechatronics, 2002, 7(4):519-523).
[7] Cagatay, S, Uchino, K, Koc, B. Piezoelectric ultrasonic motors using bulk PZT and utilizing two orthogonal bending modes of a hollow cylinder[J]. Ceramic Transactions, 2005, 167:405-412.
[8] In Nam Lei .Design and Testing of a Micro-Syringe Pump Driven by Piezoelectric Actuator[J]. 2016 International Conference on Advanced Robotics and Mechatronics (ICARM) Advanced Robotics and Mechatronics (ICARM), 2016:219-224.
[9] Henderson D A.Ultrasonic lead screw motor[P]. US 6940209,2005.
[10] 张健滔,黄位清,朱华等.基于弯振模态的螺纹杆式直线超声电机[J]. 南京航空航天大学学报(英文版), 2009,26(2): 89-94 .
ZHANG Jiantao,HUANG Weiqing,ZHU Hua,et al. LEAD SCREW LINEAR ULTRASONIC MOTOR USING BENDING VIBRATION MODES[J]. TRANSACTIONS OF NANJING UNIVERSITY OF AERONAUTICS AND ASTRONAUTICS, 2009,26(2):89-94

PDF(1386 KB)

Accesses

Citation

Detail

段落导航
相关文章

/