移动式复合载荷作用下自紧身管的动态冲击响应研究

李政,张相炎,刘宁

振动与冲击 ›› 2020, Vol. 39 ›› Issue (2) : 51-56.

PDF(1378 KB)
PDF(1378 KB)
振动与冲击 ›› 2020, Vol. 39 ›› Issue (2) : 51-56.
论文

移动式复合载荷作用下自紧身管的动态冲击响应研究

  • 李政,张相炎,刘宁
作者信息 +

Dynamic impact responses of a residual stress tube subjected to movable composite loading

  • LI Zheng,ZHANG Xiangyan,LIU Ning
Author information +
文章历史 +

摘要

为研究某大口径自紧身管在火药燃气压力和弹带动态载荷复合冲击下的动力学响应演化历程,先提出三维残余应力场生成方法并利用脚本建模方式完成身管网格划分,而后计及挤进中诸能量形式及其相对比变化,通过联合多个用户子程序重新定义次要功系数及摩擦力模型并建立弹炮耦合非线性模型与内弹道方程组的关联通信,实现了上述载荷随火药燃烧而动态加载的过程,研究表明:基于该加载方式获得的数值结果能够比较准确地反映发射中身管真实响应,残余应力对身管应力场模式及演化有明显影响,两种复合载荷分布范围存在差异,弹带对身管动态作用力不可忽略。

Abstract

To investigate the dynamic response evolution of a large-caliber autofrettaged barrel under the combined impact of gas pressure and dynamic load of a rotating band, a method for generating 3D residual stress field was proposed, and the mesh was created by the script modeling strategy.Considering the changes in energy form and the relative ratio, the secondary work coefficient and friction model were redefined by combinedly using multiple user subroutines, and the communication between the nonlinear projectile-barrel coupled model and the interior ballistic equations was established to realize the loading process of the movable composite load along with propellant combustion.The study shows that the numerical results based on this loading solution can accurately reflect real responses during barrel launching.The residual stress obviously affect the stress distribution pattern and evolution of the barrel, the distribution of the two kinds of loads are different, and the dynamic force of the band acting on the barrel can not be ignored.

关键词

残余应力 / 脚本建模 / 复合载荷 / 身管响应 / 移动载荷

Key words

residual stress / script modeling / composite load / barrel response / movable load

引用本文

导出引用
李政,张相炎,刘宁. 移动式复合载荷作用下自紧身管的动态冲击响应研究[J]. 振动与冲击, 2020, 39(2): 51-56
LI Zheng,ZHANG Xiangyan,LIU Ning. Dynamic impact responses of a residual stress tube subjected to movable composite loading[J]. Journal of Vibration and Shock, 2020, 39(2): 51-56

参考文献

[1] 张相炎,郑建国,袁人枢. 火炮设计理论[M].北京:北京理工大学出版社,2014:11-35.
ZHANG Xiang-yan, ZHENG Jian-guo, YUAN Ren-shu. Theory of artillery gun design[M]. Beijing: Beijing Institute of Technology Press,2014:11-35.(in Chinese)
[2] 曾志银,宁变芳,王在森.身管动态应力有限元通用求解办法[J].兵工学报2005,26(6):7-11.
ZENG Zhi-yin, NING Bian-fang, WANG Zai-sen, General finite element solution method of gun barrel dynamic stress[J].Acta Armamentarii,2005,26(6):7-10.
[3] 可学为,侯建,樊龙龙.火药燃气压力在身管中激发的振动[J].舰船电子工程,2009,29(10):188-190.
KE Xue-wei, HOU Jian, FAN Long-long. Vibra-tion of tube due to power gases pressure[J].Ship Electronic Engineering,2009,29(10):188-190.(in Chinese)
[4] O.Chevalier, A.Langlet, L.F.e-Sanseigne, et al.Assessment of the Lifetime of Gun Barrels Under High-Speed Moving Loads[J],Journal of Pressure Vessel Technology,2015,137(1):1-9.
[5] 于情波,杨国来,葛建立等,基于火药燃气压力空间变化的火炮发射动力学研究[J].振动与冲击,2018 37(17):141-146.
YU Qing-bo, YANG Guo-lai, GE Jian-li, et al.Artillery firing dynamics based on spatial variation of propellant gases pressure[J], Journal of vibration and shock,2018,37(17): 141-146. (in Chinese)
[6] H.Keinanen, S.Moilanen, J.Tervokoski, et al.in- fluence of rotatig band construction on gun tube loading-Part I:Numerical Approach[J]. Journal of Pressure Vessel Technology, 2012,34(4):1-6.
[7] J.Toivola, S.Moilanen, J.Tervokoski et al.influ-ence of rotating band construction on gun tube loading-Part II: Measurement and Analysis [J]. Journal of Pressure Vessel Technolog 2012, 34(4):9-18
[8] 樊黎霞,何湘玥. 弹丸挤进过程的有限元模拟与分析[J].兵工学报,2011,32(8):963-969.
FAN Li-xia, HE Xiang-yue. Finite Element Simulation and Process Analysis of Projectile Entering into Barrel[J].Acta Armamentarii,2011, 32(8):963-969.(in Chinese)
 [9] 丁传俊,张相炎. 基于热力耦合有限元模型的弹带挤进过程及内弹道过程的仿真研究[J].兵工学报,2015,36(12): 2254-2260.
 DING Chuan-jun, ZHANG Xiang-yan. Simula-lation study of bearing band engraving process and interior ballistic process base on thermome-
chanical coupling FEA model[J]. Acta Armamen tarii,2015,36(12):2254-2 261.(in Chinese)
[10] 李淼,钱林方,陈龙淼.弹带挤进过程内弹道特性研究[J].振动与冲击,2016 ,35(23):74-78.
LI Miao,Qian Lin-fang, CHEN Long-miao.In-terior ballistics’ features during rotating band engraving process[J].Journal of vibration and shock,2012,35(23):74-78.(in Chinese)
[11] Ding Chuanjun, Liu Ning,Zhang Xiangyan. A mesh generation method for worn gun barrel and its application in projectile-barrel inter action analysis[J].Finite Elements in Analysis and Design.2017,124(12),22-32.
[12] 李魁武,曾志银,宁变芳等. 液压自紧身管残余应力随实弹射击的变化规律研究[J].兵工学报,2012,33(11):1298-1301.
 LI Kui-wu, ZENG Zhi-yin, NING Bian-fang.Research on Residual Stress of Hydraulic Auto- frettaged Barrel in Practice Firing[J].Acta Arma-mentarii,2012,33(11):1298-1301.(in Chinese)
[13] 张政寿,高幼良. 预应力技术及自紧技术[M].北京:兵器工业出版社,1997:274-295.
 ZHANG Zheng-shou, GAO You-lang.PreStress-ed technology and Auto-frettage technology[M].Beijing: weapon Industry press,1997:274-295.(in Chinese)
[14] 曾志银,张军岭,吴兴波. 火炮身管强度设计理论[M].北京: 国防工业出版社,2004: 112-165.
 ZENG Zhi-yin, ZAHNG Jun-ling, WU Xing-bo.Strength Design theory on Gun Tube[M]. Bei-jing: National Defense Industry press,2004:112-165.(in Chinese)
[15] Johnson G R, Cook W H. Fracture characteristic of three metals subjected to various strain, strain rates, temperatures and pressures[J].Engineering Fracture Mechanics,1985,21(1):31-48
[16] 段海涛, 杜三明,张永振,等,高速干滑动条件下钢/铜摩擦副摩擦磨损表面摩擦热规律研究[J]润滑与密封, 2007,32(10):40-42.
DUAN Hai-tao, DU San-ming, ZHANG Yong-zhen, et al. Study on friction heat rule under high speed dry sliding condition[J]. Lubrication Engineering,2007,32(10):40-42.(in chinses)
[17] Tony D, Andrew. Projectile Driving Band Inter-actions With Gun Barrels[J]. Journal of Pressure Vessel Technology,2006,128(2): 273-278.
[18] 孙河洋,马吉胜,李伟等. 坡膛结构变化对弹带挤进过程影响的研究[J].振动与冲击,2011,30(3): 30-33.
SUN He-yang, MA Ji-sheng, LI Wei et al. Influ-ence of different bore Structures on engraving process on projectile[J].Journal of vibration and shock,2011,30(3):30-33.(in Chinese)

PDF(1378 KB)

Accesses

Citation

Detail

段落导航
相关文章

/