基于Blocked force方法的结构振动响应预测

PDF(1744 KB)

振动与冲击 ›› 2020, Vol. 39 ›› Issue (21) : 126-131.

论文

刘念思1，翁建生1，郑子健2

作者信息 +

Structural vibration response prediction based on Blocked force method

LIU Niansi1, WENG Jiansheng1, ZHENG Zijian2

Author information +

文章历史 +

摘要

振动噪声源特性识别一直是汽车开发中的重要任务，针对传统传递路径分析中获取激励的局限性，提出了基于Blocked force方法的传递路径分析方法，可以直接测得等效力代替激励源分析结构振动。对Blocked force方法进行理论推导，验证了理论的准确性。针对电子制动助力器工作激励引起的结构噪声问题进行应用研究，选取前围板振动加速度作为研究对象。结果表明，该方法预测的前围板振动响应和试验测试值吻合，验证了Blocked force方法的工程可行性，为整车开发中电子制动助力器结构噪声优化提供理论依据。

Abstract

Vibration-noise source characteristics recognition is an important task in development of automobiles.Here, aiming at limitations of acquiring excitation in traditional transfer path analysis (TPA) method, a novel TPA method based on the Blocked force method was proposed to directly measure equivalent force and replace excitation source for structural vibration analysis.The Blocked force method was derived theoretically to verify the correctness of its theory.The method was used to study the structure-borne noise problem caused by working excitation of an electronic brake booster(EBB).Results showed that vibration responses of its front panel predicted with this method agree well with measured values in tests; the engineering feasibility of the proposed method is verified;the study results provide a theoretical basis for the optimization of EBB structure-borne noise in vehicle development.

导出引用

刘念思1，翁建生1，郑子健2. 基于Blocked force方法的结构振动响应预测[J]. 振动与冲击, 2020, 39(21): 126-131

LIU Niansi1, WENG Jiansheng1, ZHENG Zijian2. Structural vibration response prediction based on Blocked force method[J]. Journal of Vibration and Shock, 2020, 39(21): 126-131

参考文献

[1] 郭荣，裘剡，房怀庆，等. 频域传递路径分析方法(TPA) 的研究进展[J]. 振动与冲击，2013,32(13):49-55.
GUO Rong, QIU Shan, FANG Huaiqing,et al. Advance in studying on transfer path analysis methods in frequency domain[J]. Journal of vibration and shock, 2013,32(13):49-55.
[2] 伍先俊，吕亚东，隋富生. 工况传递路径分析法原理及其应用[J]. 噪声与振动控制，2014,34(01):28-31.
WU Xianjun, LV Yadong, SUI Fusheng. Basic Theory of Operational Transfer Path Analysis and Its Application[J]. Noise and Vibration Control, 2014,34(01):28-31.
[3] 庞晓柯，周以齐，唐伟. 基于工况传递路径分析的挖掘机座椅振动研究[J]. 振动与冲击，2015,34(09):171-176.
PANG Xiaoke, ZHOU Yiqi, TANG Wei, et al. Excavator seat vibration investigation based on operational transfer path analysis[J]. Journal of vibration and shock,2015,34(09):171-176.
[4] D. de Klerk, D.J. Rixen. Component transfer path analysis method with compensation for test bench dynamics[J]. Mechanical Systems and Signal Processing,2010,24(6).
[5] A.T. Moorhouse, A.S. Elliott, T.A. Evans. In situ measurement of the blocked force of structure-borne sound sources[J]. Journal of Sound and Vibration, 2009,325(4).
[6] 潜磊. 电动助力制动系统研究[D].吉林：吉林大学，2017.
QIAN lei. Research on Electric Power Braking System[D].
Jilin：Jilin University,2017.
[7] 王永亮，刘浩，郑卿卿，等. 车辆结构噪声传递特性及其峰值噪声成因的分析[J]. 汽车工程，2018, 40(12): 1461-1466.
Wang Yong liang, Liu Hao, Zheng Qingqing,et al. Analysis on the Transfer Characteristics of Vehicle Structure-borne Noise[J]. Automotive Engineering, 2018, 40(12): 1461-1466.
[8] 金翔，李蓓智. 高速电主轴动刚度的计算与测试方法[J]. 现代制造工程，2016(05):40-45.
Jin Xiang, Li Beizhi. Studies on the dynamic stiffness of high speed spindle supporting components[J]. Modern Manufacturing Engineering, 2016(05):40-45.
[9] David Lennström, Magnus Olsson, Frédéric Wullens,et al. Validation of the blocked force method for various boundary conditions for automotive source characterization[J]. Applied Acoustics,2016,102.
[10] Tony L. Schmitz,K. Scott Smith. Modal Analysis[M].Springer International Publishing:2018-10-31.
[11] 李克强，段飞，罗禹贡. 结构噪声主动控制原理及方法[J].声学技术，1998(04):20-25.
LI Keqiang, DUAN Fei, LUO Yugong. Theory and scheme of active control on structural interior noise[J]. Technical Acoustics, 1998(04):20-25.
[12] Gyu young Yun, Heung Soo Kim, Jaehwan Kim. Blocked force measurement of an electro-active paper actuator using a cantilevered force transducer[J]. Smart Materials and Structures, 2008,17(2).
[13] 王况，王科盛，左明健. 基于阶次分析技术的行星齿轮箱非平稳振动信号分析[J]. 振动与冲击，2016,35(05):140-145.
WANG Kuang, WANG Kesheng, ZUO Mingjian. Fault diagnosis of a planetary gearbox based on order tracking[J]. Journal of vibration and shock, 2016,35(05):140-145.
[14] 周益. 汽车变速器齿轮啸叫声特性与控制研究[D]. 江西农业大学, 2012.
ZHOU Yi. The characteristics and control research of automotive transmission gear whine[D].Nanchang: Jiangxi Agricultural University,2012.
[15] Athanasios Pappas, Dina DAyala, Alessandro Antonini, Alison Raby. Finite Element Modelling and Limit Analysis of Fastnet Lighthouse Under Impulsive Ocean Waves[M]. Springer International Publishing:2019-07-31.
[16] 张皓，李东升，李宏男. 有限元模型修正研究进展:：从线性到非线性[J]. 力学进展, 2019,49(00):542-575.
ZHANG Hao , LI Dongsheng, LI Hongnan. Recent progress on ﬁnite element model updating:From linearity to nonlinearity[J]. Advances in Mechanics, 2019,49(00):542-575.