基于均匀设计的模型更新混合模拟试验方法

陈再现,钟炜彭,李秦鸣

振动与冲击 ›› 2020, Vol. 39 ›› Issue (21) : 9-16.

PDF(1835 KB)
PDF(1835 KB)
振动与冲击 ›› 2020, Vol. 39 ›› Issue (21) : 9-16.
论文

基于均匀设计的模型更新混合模拟试验方法

  • 陈再现,钟炜彭,李秦鸣
作者信息 +

Model updating hybrid simulation test method based on uniform design

  • CHEN Zaixian, ZHONG Weipeng, LI Qinming
Author information +
文章历史 +

摘要

随着混合模拟试验中子结构自由度和数量及其更新参数的增加,混合模拟试验模型更新中用于寻找更优参数的样本点数量及计算量均会明显增加。从试验设计角度出发,提出基于均匀设计的模型更新混合模拟方法。该方法在试验子结构的基础上,利用均匀设计构造一个验算子结构样本空间,以恢复力为目标,从中找出最符合试验子结构的数值模型作为数值结构本构参数更新的来源,有效提升识别效率。考虑钢材不同本构模型及试验子结构边界处弯矩处理情况,以2层单跨钢框架为例进行了四种类型数值模拟分析。模型更新混合模拟试验采用Matlab与OpenSees混合编程,软件数据交互全采用Socket接口,效率比传统文本读写交互得到有效提升。结果表明,该方法适用于不同边界处理情况,极大地降低了模型更新计算时间,且有效提升了混合模拟试验的模拟精度。

Abstract

With increase in DOFs, substructure number and updating parameters in hybrid simulation tests, sample points and computational amount needed to search more optimal parameters for model updating hybrid simulation tests can obviously increase.Here, from the perspective of testing design, a model updating hybrid simulation test method based on uniform design was proposed.Based on tested substructures, the uniform design was used to construct a sample space of checking substructures.Taking restoring force as an objective, the most suitable numerical model of checking substructures for tested substructures was found as the source of updating constitutive parameters of the studied numerical structure to effectively improve the identification efficiency.Considering different constitutive models of steel products and bending moment processing situations at boundaries of tested substructures, a single-span two-story steel frame structure was taken as an example to do 4 types of numerical simulations.The model updating hybrid simulation tests adopted Matlab-OpenSees mixed programming, and the software data interaction adopted socket interface.The efficiency was improved effectively compared with the traditional text read-write interaction.Results showed that the proposed method is suitable for different boundary processing situations; the model updating calculation time is reduced greatly, and the accuracy of the proposed hybrid simulation tests is improved effectively.

关键词

混合模拟试验 / 模型更新 / 均匀设计 / 子结构 / OpenSees

Key words

hybrid simulation test / model updating / uniform design / substructure / OpenSees

引用本文

导出引用
陈再现,钟炜彭,李秦鸣. 基于均匀设计的模型更新混合模拟试验方法[J]. 振动与冲击, 2020, 39(21): 9-16
CHEN Zaixian, ZHONG Weipeng, LI Qinming. Model updating hybrid simulation test method based on uniform design[J]. Journal of Vibration and Shock, 2020, 39(21): 9-16

参考文献

[1] HAKUNO M, SHIDAWARA M, HARA T. Dynamic destructive test of a cantilevers beam, controlled by an analogcomputer [J]. Transaction of the Japan Society of Civil Engineering, 1969, 171: 1-9
[2] KWON O S, ELNASHAI A S, SPENCER B F. A framework for distributed analytical and hybrid simulations [J]. Structural Engineering & Mechanics, 2008, 30(3):331-350.
[3] NAKASHIMA M. Hybrid simulation: An early history[J]. Earthquake engineering & structural dynamics. 2020, 49(10): 949-962.
[4] SHING P B, NAKASHIMA M, Bursi O S. Application of Pseudodynamic Test Method to Structural Research [J]. Earthquake Spectra, 1996, 12(1):29-56.
[5] SHAO X, GRIFFITH C. An overview of hybrid simulation implementations in NEES projects [J]. Engineering Structures, 2013, 56(Complete):1439-1451.
[6] 王涛,潘鹏.子结构混合试验方法研究与应用 [J].工程力学,2018,35(02):1-12.
WANG Tao, PAN Peng. Study and application of substructure online hybrid test method [J]. Engineering Mechanics, 2018,35(02):1-12.
[7] 陈再现, 韩光, 王焕定, 等. 传统界面处理的子结构拟动力试验误差分析 [J]. 地震工程与工程振动, 2014(S1):657-662.
CHEN Zai-xian, Han Guang, WANG Huan-ding, et al. Error study on conventional interface scheme of substructure pseudo-dynamic testing method [J]. Earthquake Engineering and Engineering Dynamics, 2014(S1):657-662.
[8] 陈再现, 孔文江, 王焕定. 考虑倾覆力矩的子结构混合模拟试验方法 [J]. 建筑结构学报, 2016, 37(9):99-107.
CHEN Zai-xian, KONG Wen-jiang, WANG Huan-ding. Substructure hybrid simulation testing method considering overturning moment [J]. Journal of Building Structures, 2016, 37(9):99-107.
[9] ELANWAR H H, ELNASHAI A S. Application of in-test model updating to earthquake structural assessment [J]. Journal of Earthquake Engineering, 2015, 20(1):1-18.
[10] KWON O S, KAMMULA V. Model updating method for substructure pseudo‐dynamic hybrid simulation [J]. Earthquake Engineering & Structural Dynamics, 2013, 42(13):1971-1984.
[11] ELANWAR H H, ELNASHAI A S. On-line model updating in hybrid simulation tests [J]. Journal of Earthquake Engineering, 2014, 18(3):350-363.
[12] ELANWAR H H, ELNASHAI A S. Framework for online model updating in earthquake hybrid simulations [J]. Journal of Earthquake Engineering, 2015, 20(1):1-21.
[13] Wu B, Ning X, Xu G, et al. Online numerical simulation: A hybrid simulation method for incomplete boundary conditions [J]. Earthquake Engineering & Structural Dynamics, 2018;(4):889.
[14] Wu B, Chen Y, Xu G, et al. Hybrid simulation of steel frame structures with sectional model updating [J]. Earthquake Engineering & Structural Dynamics, 2016, 45(8):1251-1269.
[15] Mei Z, Wu B, Bursi O S, et al. Hybrid simulation of structural systems with online updating of concrete constitutive law parameters by unscented Kalman filter [J]. Structural Control and Health Monitoring, 2017:e2069.
[16] Mei Z, Wu B, Bursi OS, et al. Hybrid simulation with online model updating: Application to a reinforced concrete bridge endowed with tall piers [J]. Mechanical Systems and Signal Processing.2019;123:533-553.
[17] 方开泰. 均匀设计与均匀设计表[M]. 北京:科学出版社, 1994.
[18] Elnashai A S, Chryssanthopoulos M. Effect of random material variability on seismic design parameters of steel frames [J]. Earthquake Engineering & Structural Dynamics, 1991, 20(2):101-114.
[19] 朱希, 施刚. 国产高强度结构钢材材性参数统计与分析[J]. 建筑结构, 2015(21):9-15.
ZHU Xi, SHI Gang. Statistics and analysis of material properties of domestic high-strength structural steels in China [J]. Building Structure, 2015(21):9-15.

PDF(1835 KB)

Accesses

Citation

Detail

段落导航
相关文章

/