新型椭圆齿轮泵具有低脉动、大排量的性能优势,在流体输送领域具有广阔的应用前景,针对泵的两级非圆齿轮传动机构,研究多参变激励下泵的动态特性。分析了椭圆齿轮泵的流量脉动组成,针对由非圆形转子引起的主脉动,提出了基于非圆齿轮变速驱动的平抑方法;讨论了非圆齿轮时变瞬心激励机理,建立了两级非圆齿轮传动机构的动力学模型;通过龙格-库塔法,定量地研究了在时变瞬心和刚度复合激励下泵传动机构的扭振特性,结果表明:椭圆齿轮泵传动机构产生复杂的多频响应,随偏心率,转速和泵出口压力的增加,转子上瞬心和刚度引起的振动发生不同的变化,最终导致两转子的振动加剧。
Abstract
New type elliptical gear pump has performance advantages of low flow fluctuation and large output volume, and it is widely used in fluid transportation field.Here, aiming at the pump’s two-stage non-circular gear transmission mechanism, the pump’s dynamic features were studied under multiple parametric excitations.The flow fluctuation composition of the pump was analyzed, and a method based on non-circular gears’ variable-speed drive was proposed to suppress main ripple caused by non-circular rotor.The exciting mechanism of non-circular gear time-varying instantaneous center was discussed, and the dynamic model of the two-stage non-circular gear transmission mechanism was established.Using Runge-Kutta method, the torsional vibration features of the pump’s transmission mechanism were quantitatively studied under the compound excitation of instantaneous center and stiffness.The results showed that the elliptical gear pump’s transmission mechanism has complicated multi-frequency response; with increase in eccentricity, rotating speed and the pump’s outlet pressure, rotor vibrations due to instantaneous center and stiffness have different changes, and finally cause two rotors’ vibration to intensify.
关键词
非圆齿轮 /
齿轮动力学 /
参数激励 /
扭振
{{custom_keyword}} /
Key words
non-circular gear /
gear dynamics /
parametric excitation /
torsional vibration
{{custom_keyword}} /
{{custom_sec.title}}
{{custom_sec.title}}
{{custom_sec.content}}
参考文献
[1] Yazar M., Özdemir A. Comparative analysis of the pressure vibrations and the flow rates of a hydraulic pump made of a pair of elliptical and cylindrical spur gears [J]. Technology, 2011, 14(1): 1-10.
[2] 谭伟明. 基于卵形齿轮的并联齿轮泵及其流量分析[J]. 机械传动,2014,38(11):164-168.
Tan Weiming. Analysis of parallel multi-gear pump and its flow based on the oval gear[J]. Journal of Mechanical Transmission,2014,38(11): 164-168.
[3] 杨文华,刘大伟. 椭圆齿轮泵流量特性与脉动平抑[J]. 机床与液压,2017,45(5):77-80.
Yang Wenhua, Liu Dawei. Flow characteristic and pulsation stabilization of elliptical gear pump [J]. Machine Tool & Hydraulics, 2017, 45(5): 77-80.
[4] Tucker R. W., Wang C., Librovich B. V.. Mathematical modelling of rotary vane engines[J]. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 2003, 217(6): 687-704.
[5] Huang K. J., Chen S. C., Komsuoglu H., et al. Design and performance evaluation of a bio-inspired and single-motor-driven hexapod robot with dynamical gaits[J]. Journal of Mechanisms and Robotics, Transactions of the ASME, 2015, 7(3): 031017.
[6] Okada M., Takeda Y.. Synthesis and evaluation of non-circular gear that realizes optimal gear ratio for jumping robot[C]//IEEE International Conference on Intelligent Robots and Systems:Institute of Electrical and Electronics Engineers Inc., 2013, 5524-5529.
[7] 李宪奎,杨红普,杨拉道. 椭圆齿轮驱动的结晶器低频共振分析[J]. 机械工程学报,2008,44(5):231-237.
Li Xiankui, Yang Hongpu, Yang Ladao. Low-frequency Resonance of Mold Driven by Oval Gears[J]. Journal of Mechanical Engineering, 2008, 44(5):231-237.
[8] 叶秉良,朱浩,俞高红等. 旋转式水稻钵苗移栽机构动力学分析与试验[J]. 农业机械学报,2016,47(5):53-61.
Ye Bingliang, Zhu Hao, Yu Gaohong, et al. Dynamics Analysis and Tests of Rotary Transplanting Mechanism for Rice Pot-seedling[J]. Transactions of the Chinese Society for Agricultural Machinery, 2016, 47(5):53-61.
[9] 叶秉良,易卫明,俞高红等. 不完全非圆齿轮传动钵苗移栽机构缓冲装置研究[J]. 农业机械学报,2017,48(3):69-75.
Ye Bingliang, Yi Weiming, Yu Gaohong, et al. Buffer device of transplanting mechanism for plug seedlings based on transmission with incomplete non-circular gears [J]. Transactions of the Chinese Society for Agricultural Machinery, 2017, 48(3): 69-75.
[10] Liu X., Nagamura K., Ikejo K.. Analysis of the dynamic characteristics of elliptical gears[J]. Journal of Advanced Mechanical Design, Systems and Manufacturing, 2012, 6(4):484-497.
[11] Liu X., Nagamura K., Ikejo K.. Vibration and noise characteristics of elliptical gears due to non-uniform rotation[J]. Journal of Advanced Mechanical Design, Systems and Manufacturing, 2012, 6(4):484-511.
[12] Liu X., Nagamura K., Ikejo K.. Simulation on the vibration characteristics of elliptical gears[J]. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 2013, 227(4):819-830.
[13] 刘大伟,任廷志,巴延博等. 基于弹性转角分离的非圆齿轮扭振模型及其动态特性[J]. 振动与冲击,2016,35(23),228-233.
Liu Dawei, Ren Tingzhi, Ba Yanbo, et al. Torsional vibration model and its dynamic characteristics for a noncircular gear based on separation of elastic rotating angle[J]. Journal of Vibration and Shock, 2016, 35(23), 228-233.
[14] Lin C., Liu Y., Gu S. J.. Analysis of nonlinear twisting vibration characteristics of orthogonal curve‑face gear drive[J]. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 2015, 37(5): 1499-1505.
[15] Cai Z., Lin C.. Dynamic model and analysis of nonlinear vibration characteristic of a curve-face gear drive [J]. Journal of mechanical engineering, 2017, 63(3): 161-170.
{{custom_fnGroup.title_cn}}
脚注
{{custom_fn.content}}