倾斜荷载下内凹三角形负泊松比材料的面内冲击动力学性能

马芳武,梁鸿宇,赵颖,陈实现,蒲永锋

振动与冲击 ›› 2020, Vol. 39 ›› Issue (4) : 81-87.

PDF(2100 KB)
PDF(2100 KB)
振动与冲击 ›› 2020, Vol. 39 ›› Issue (4) : 81-87.
论文

倾斜荷载下内凹三角形负泊松比材料的面内冲击动力学性能

  • 马芳武,梁鸿宇,赵颖,陈实现,蒲永锋
作者信息 +

In-plane dynamic crushing of concave triangles materials with negative poisson’s ratio under inclined load

  • MA Fangwu,LIANG Hongyu,ZHAO Ying,CHEN Shixian,PU Yongfeng
Author information +
文章历史 +

摘要

倾斜荷载在汽车碰撞事故中无法避免,严重影响多胞材料的力学响应。以内凹三角形负泊松比材料为研究对象,通过显式动力有限元软件LS-DYNA具体分析了冲击倾角(0°~10°)与冲击速度(20~70 m/s)对内凹三角形负泊松比材料面内冲击的变形模态和动力响应的影响,并构造了完整的变形模式分类图。引入最佳承载角的概念,当冲击倾角β=4°时,诱发了稳定有序的变形模式,使得抵抗变形的形式主要以结构胞壁的压缩与弯曲为主,平台应力值与吸能值得到了较大的提升,进一步发挥了结构的抗承载能力,甚至超过了理想的轴向冲击工况。这一特征与六边形蜂窝结构有所不同,对汽车吸能构件的设计具有重要的指导意义。

Abstract

Inclined loading conditions cannot be avoided in traffic accidents and strongly influence the mechanical response of cellular material.In present study, based on explicit dynamic finite element simulation by LS-DYNA, deformation modes as well as dynamic responses of a concave triangle with negative Poisson's ratio structure undergoing non-ideal oblique impact loadings have been investigated considering as significant parameters of the load angle (ranging from 0° to 10°) and the impact velocity (ranging from 20 m/s to 70 m/s), and corresponding mode classification map was constructed.Evident influence of asynchronous loading as well as impact speed on the deformation mode evolution has been determined.The concept of optimal bearing angle was introduced.When the load angle is β=4°, a stable and orderly deformation mode was induced.The form of resisting deformation is mainly based on the compression and bending of the structural cell wall, so that the platform stress value and energy absorption value have been made a great improvement.The anti-bearing capacity of the structure has been further exerted, even exceeding the ideal axial impact condition.The present study provides a significant advancement to the comprehensive understanding of the dynamic response of cellular material, which could be used to develop more valuable guidelines for design purposes in automotive energy absorbing devices.

关键词

倾斜荷载 / 内凹三角形 / 负泊松比效应 / 平台应力 / 面内冲击 / 能量吸收

Key words

inclined load / concave triangle / negative Poisson’s ratio configuration / platform stress / in-plane impact / energy absorption

引用本文

导出引用
马芳武,梁鸿宇,赵颖,陈实现,蒲永锋. 倾斜荷载下内凹三角形负泊松比材料的面内冲击动力学性能[J]. 振动与冲击, 2020, 39(4): 81-87
MA Fangwu,LIANG Hongyu,ZHAO Ying,CHEN Shixian,PU Yongfeng. In-plane dynamic crushing of concave triangles materials with negative poisson’s ratio under inclined load[J]. Journal of Vibration and Shock, 2020, 39(4): 81-87

参考文献

[1] Gibson L J, Ashby M F. Cellular Solids : structure and properties [M]. Cambridge :Cambridge University Press, 1998 ,33 :487-488
[2] Prawoto Y. Seeing auxetic materials from the mechanics point of view: A structural review on the negative Poisson’s ratio [J]. Computational Materials Science, 2012, 58:140-153.
[3] R. Lakes. Deformation mechanisms in negative Poisson's ratio materials: structural aspects[J]. Journal of Materials Science, 1991, 26(9):2287-2292.
[4] 邓小林, 刘旺玉. 一种负泊松比正弦曲线蜂窝结构的面内冲击动力学分析[J]. 振动与冲击, 2017, 36(13):103-109.
DENG Xiaolin,LIU Wangyu. In-plane impact dynamic analysis for a sinusoidal curved honeycombstructure with negative poisson’s ratio[J]. Journal of Vibration and Shock,2017, 36(13):103-109.
[5] 韩会龙, 张新春. 星形节点周期性蜂窝结构的面内动力学响应特性研究[J]. 振动与冲击, 2017, 36(23):223-231.
HAN Huilong,ZHANG Xinchun.In- plane dynamic impact response characteristics of periodic 4- pointstar- shaped honeycomb structures[J]. Journal of Vibration and Shock, 2017, 36(23):223-231.
[6] 卢子兴, 李康. 手性和反手性蜂窝材料的面内冲击性能研究[J]. 振动与冲击, 2017, 36(21):16-22.
LU Zixing,LI Kang. In-plane dynamic crushing of chiral and anti-chiral honeycombs[J]. Journal of Vibration and Shock,2017, 36(21):16-22.
[7] Li D, Yin J, Dong L, et al. Strong re-entrant cellular structures with negative Poisson’s ratio[J]. Journal of Materials Science, 2018, 53(5):3493-3499.
[8] Liu W, Wang N, Luo T, et al. In-plane dynamic crushing of re-entrant auxetic cellular structure[J]. Materials & Design, 2016, 100:84-91.
[9] Zhang X C, An L Q, Ding H M, et al. The influence of cell micro-structure on the in-plane dynamic crushing of honeycombs with negative Poisson’s ratio[J]. Journal of Sandwich Structures & Materials, 2015, 17(1):26-55.
[10] Gao D, Zhang C. Theoretical and numerical investigation on in-plane impact performance of chiral honeycomb core structure[J]. Journal of Structural Integrity and Maintenance,2018,3(2):95-105
[11] 张新春, 刘颖, 李娜. 具有负泊松比效应蜂窝材料的面内冲击动力学性能[J]. 爆炸与冲击, 2012, 32(5):475-482.
Zhang Xinchun,Liu Ying,Li Na.In-plane impact dynamic crushing of honeycombs with negative Poisson’s ratio effects [J]. Explosion and Shock Waves, 2012, 32(5):475-482.
[12] Zhou G, Ma Z D, Li G, et al. Design optimization of a novel NPR crash box based on multi-objective genetic algorithm[J]. Structural & Multidisciplinary Optimization, 2016, 54(3):1-12.
[13] SureshKeshavanarayana , ManojVarmaThotakuri. Off-axis compression behavior of honeycomb core in WT-plane[J]. International Journal of Crashworthiness, 2009, 14(2):173-181.
[14] Hong S T, Pan J, Tyan T, et al. Dynamic crush behaviors of aluminum honeycomb specimens under compression dominant inclined loads[J]. International Journal of Plasticity, 2008, 24(1):89-117.
[15] Reyes A, Langseth M, Hopperstad OS. Crashworthiness of aluminium extrusions subjected to oblique loading: experiments and numerical analyses. Int J Mech Sci 2002 44 (9): 1965-84.
[16] Ahmad Z, Thambiratnam DP, Tan ACC. Dynamic energy absorption characteristics of foam-filled conical tubes under oblique impact loading. International Journal of Impact Engineering,2010 37 (5): 475-88.
[17] Zarei H, Kroger M. Optimum honeycomb filled crash absorber design. Materials and Design, 2008; 29 (1): 193 - 204.
[18] Greve L, Pickett AK, Payen F. Experimental testing and phenomenological modelling of the fragmentation process of braided carbon/epoxy composite tubes under axial and oblique impact. Composites Part B Engineering,2008 39: 1221-32.
[19] Wang Z, Lu Z, Yao S, et al. Deformation mode evolutional mechanism of honeycomb structure when undergoing a shallow inclined load[J]. Composite Structures, 2016, 147:211-219.
[20] Kooistra G W, Deshpande V S, Wadley H N G. Compressive behavior of age hardenable tetrahedral lattice truss structures made from aluminum [J]. Acta Materialia, 2004, 52(14):4229-4237.
[21] Zhang P, Wang Z, Zhao L. Dynamic crushing behavior of open-cell aluminum foam with negative Poisson’s ratio[J]. Applied Physics A, 2017, 123(5):321.

PDF(2100 KB)

1570

Accesses

0

Citation

Detail

段落导航
相关文章

/