多次水下爆炸钢制圆板应变与挠度增长规律分析

PDF(1973 KB)

振动与冲击 ›› 2020, Vol. 39 ›› Issue (5) : 131-136.

论文

李旭东1,2，尹建平1，杜志鹏2，赵鹏铎2，张春辉2，李营2,3，张斐1,2

作者信息 +

Growth law analysis for strain and deflection of steel circular plates subjected to multiple underwater explosions

LI Xudong1,2, YIN Jianping1, DU Zhipeng2, ZHAO Pengduo2, ZHANG Chunhui2, LI YING2,3, ZHANG Fei1,2

Author information +

文章历史 +

摘要

在海上战争中，水面舰艇以及潜艇可能会受到多枚水中兵器的攻击，产生的累计损伤问题影响着水面舰艇以及潜艇的持续作战能力和生命力。对膨胀直径为390 mm，厚度为5 mm空气背衬钢制圆板，在50 g药量下，进行持续多次水下爆炸加载试验，对板中心应变、挠度以及厚度减薄率进行测量，试验结果分析表明：第一次爆炸加载时，局部空化使钢板产生的应变是冲击波加载的1倍，当钢板被炸弯后，再次爆炸加载局部空化的二次加载现象不明显。此外，气泡脉动及气泡射流会使钢板发生明显的弹性应变，应变值是初始冲击波作用的10%。对中心挠度和厚度减薄率的数据分析发现，钢板厚度减薄率是随着中心挠度呈线性增加的。该研究对舰船持续作战能力及生命力的评估提供了一定的试验支撑。

Abstract

In sea wars, surface ships and submarines may be attacked by multiple missiles or torpedoes.Cumulative damages produced affect sustained combat capability and vitality of surface ships and submarines.Here, continuous underwater explosion loading tests were conducted for an air back liner steel circular plate with diameter of 390 mm and thickness of 5 mm under 50 g of explosive.The plate center strain, deflection and thickness reduction rate were measured.The test results showed that when the first explosion loading happens, the plate’s strain produced due to local cavitation is one time of that due to shock wave loading; after the steel plate is blown and bent, the second loading phenomenon due to the second blast and local cavitation is not obvious; bubble pulsation and bubble jet cause the steel plate to have obvious elastic deformation, its strain value is 10% of that caused by initial shock wave.The data analysis for plate center deflection and thickness reduction rate showed that the steel plate’s thickness reduction rate increases linearly with increase in center deflection; the study results provide a certain test support for evaluating warships’ sustained combat ability and vitality.

导出引用

李旭东1,2，尹建平1，杜志鹏2，赵鹏铎2，张春辉2，李营2,3，张斐1,2. 多次水下爆炸钢制圆板应变与挠度增长规律分析[J]. 振动与冲击, 2020, 39(5): 131-136

LI Xudong1,2, YIN Jianping1, DU Zhipeng2, ZHAO Pengduo2, ZHANG Chunhui2, LI YING2,3, ZHANG Fei1,2. Growth law analysis for strain and deflection of steel circular plates subjected to multiple underwater explosions[J]. Journal of Vibration and Shock, 2020, 39(5): 131-136

参考文献

[1]杨文山,水下接触爆炸舰船毁伤及防护机理[D],哈尔滨:哈尔滨工程大学,2011.
Yang Wenshan，Local Damage and Protection Mechanism of Warship Underwater Contact Explosion[D],HA ER BIN, Harbin Engineering University,2011.
[2]吴成,金俨,李华新,固支方板对水中爆炸作用的动态响应研究,[J]高压物理学报,2003,4(17):275-282.
WU C,JIN Yan,et al.A Study on Square Plate Dynamic Response under UnderwaterExplosion, [J] CHINESE JOURNAL OF HIGH PRESSURE PHYSICS,2003,4(17):275-282.
[3]谌勇,唐平,汪玉,杨世全刚塑性圆板受水下爆炸载荷时的动力响应[J]爆炸与冲击，2005,1(25):90-96.
SHEN Yong，TANG Ping，WANG Yu，YANG Quanshi，Dynamic Response of Rigid Plastic Disc under Underwater Explosion Loading，[J]EXPLOSION AND SHOCK WAVES,2005,1(25):90-96.
[4]唐廷,朱锡,韦灼彬,侯海量,水下爆炸冲击波作用下空气背衬平板的运动[J].兵工学报,2012,7(33):831-835
TANG Ting, ZHU Xi, WEI Zhuobin, HOU Hailiang,Movement of Air Backed Plane Plates Subjected to Shock Wave of Underwater Explosion[J] .ACTA ARMAMENTARII,2012,7(33):831-835
[5]Rajendran R, Narasimhan K. Linear elastic shock response of plane plates subjected to underwater explosion. Int J Impact Eng 2001;25:493-506.
[6]Adapaka Srinivas Kumar .Blast loading of underwater targets e A study through Explosion Bulge Test experiments.[J]International Journal of Impact Engineering,2015;76:189-195.
[7]Rajendran R, Narasimhan K. Performance evaluation of HSLA steel subjected to underwater explosion. J MaterEng Performance, ASM 2001;10:66-74.
[8]Cole RH. Underwater explosions. NJ, USA: Princeton University Press; 1948.
[9] BEST JP. The effect of non-spherical collapse on determination of explosive bubble parameters [R].AD-A407861.2002.
[10]黄明志,骆竞晞,贺保平.金属硬化曲线的阶段性和最大均匀应变［J］.金属学报,1983,19(4):39-47．
HUANG Mingzhi,LUO Jingxi,HE Baoping,Stages on strain hardening curve and ultimate uniform strain [J]Acta Metallurgi-ca Sinica，1983,19(4):39－47．
[11]李建国.压力容器设计的力学基础及其标准应用[M].机械工业出版社.2005.
Li Jianguo. The Mechanical Foundation of Pressure Vessel Design and Its Standard Application[M]. Machinery Industry Press.2005.
[12]李海涛,朱　锡,黄晓明,牟金磊,水下爆炸冲击波作用下空化区域形成的特性研究[J].高压物理学报，2008,6(25):181-187.
LI Hai-Tao,ZHU Xi.On the characteristics of cavitation formation subjected to underwater blast shock wave.J CHINESE JOURNAL OF HIGH PRESSURE PHYSICS,2008,6(25):181-187.