风洞模型棱角制作误差对扁平箱梁气动力和涡脱特性的影响

PDF(2188 KB)

振动与冲击 ›› 2020, Vol. 39 ›› Issue (6) : 181-188.

论文

祝志文，李宏博

作者信息 +

Effects of model corner fabrication errors on the aerodynamic forces and vortex shedding characteristics of a shallow box girder

ZHU Zhiwen,LI Hongbo

Author information +

文章历史 +

摘要

桥梁节段模型试验研究的顾虑之一，是制作扁平箱梁节段模型时各个棱角制作误差，比如棱角圆化对其气动力和涡脱特性的影响，但至今未见相关报道。该研究采用雷诺时均Navier-Stokes (RANS)方程和SST k-ω湍流模型对大带东桥主跨扁平钢箱梁开展了计算流体动力学模拟(CFD)。在节段模型制作误差可能导致的棱角圆化半径范围内，对比了加劲梁绕流形态、平均气动力系数和漩涡脱落St数。研究表明：扁平箱梁棱角小半径圆化时半径的增大使得局部流动的分离强度减小，但分离点位置不再固定；模型棱角圆化对扁平箱梁平均气动力和漩涡脱落St数的影响可忽略不计；前缘棱角圆化后加劲梁气动特性的Re效应不明显。研究认为，可不考虑加劲梁风洞试验模型棱角小半径圆化对主梁气动特性的影响，因而CFD模拟时加劲梁风嘴前缘棱角可作小半径圆化处理，以降低网格数量、提高网格质量和减小CFD的计算量。

Abstract

One of major concerns, when carrying out bridge sectional model tests, is the effect of model corner fabrication errors on the aerodynamic forces and vortex shedding property of a shallow box girder, which has not been addressed at current time.The Reynolds-averaged Navier-Stokes equations and SST  k-ω turbulent model were used to do the simulation of the flow field around the rigid box girder section of the main span of the Great Belt East Bridge.For different kinds of corner rounding radius, the flow pattern around the girder section, the mean aerodynamic coefficients and vortex-shedding frequency were obtained.The results show that the increase of corner rounding radius can decreas the flow separation intensity, while the flow separation point will no longer keep fixed.The simulated mean aerodynamic coefficients and Strouhal (St) number indicate the minor influence of different corner rounding configuration.The further study shows that the leading edge rounding presents small and negligible Reynolds number effect on the mean aerodynamic coefficients and St number.It is suggested that the effects of corner rounding with small radius can be neglected in bridge wind resistant design.It is also suggested that corner rounding with small radius at the leading edge can be adopted in CFD simulation, which will help decrease grid number, improve mesh quality and reduce CFD computational cost.

导出引用

祝志文，李宏博. 风洞模型棱角制作误差对扁平箱梁气动力和涡脱特性的影响[J]. 振动与冲击, 2020, 39(6): 181-188

ZHU Zhiwen,LI Hongbo. Effects of model corner fabrication errors on the aerodynamic forces and vortex shedding characteristics of a shallow box girder[J]. Journal of Vibration and Shock, 2020, 39(6): 181-188

参考文献

[1] Larsen, A., Walther, J. H., Aeroelastic analysis of bridge girder sections based on discrete vortex simulations [J]. Journal of Wind Engineering and Industrial Aerodynamics, 67-68, Apr-Jun, 1997, 253~265.
[2] Frandsen, J. B., Computational fluid-structure interaction applied to long-span bridge design [D]. PhD thesis, University of Cambridge, Cambridge, 1999.
[3] 曹丰产，项海帆，陈艾荣，桥梁断面气动导数和颤振临界风速的数值计算[J]，空气动力学学报，18(1), 2000, 26~33.
Cao Fengchan, Xiang Haifan, Chen Airong, numerical assessment of aerodynamic derivatives and critical wind speed of flutter of bridge decks [J], ACTA Aerodynamica Sinica, 18(1), 2000, 26~33. (In Chinese)
[4] Zhi-Wen Zhu, Ming Gu, Zheng-qing Chen, Wind tunnel and CFD study on identification of flutter derivatives of a long-span self-anchored suspension bridge [J], Computer- Aided Civil and Infrastructure Engineering, 22 (2007): 541-554.
[5] 顾明,张正维,全涌.降低超超高层建筑横风向响应气动措施研究进展[J].同济大学学报,41(3):317-323.
GU Ming，ZHANG Zhengwei ，QUAN Yong. Aerodynamic measures for mitigation of across-wind responses of super tall buildings:state of the art[J]. Journal of Tongji University(Natural Science),
2013, 41(3) :317-323.
[6] Tamura T,Miyagi T.The effect of turbulence on aerodynamic forces on a square cylinder with various corner shapes [J].Journal of Wind Engineering and Industrial Aerodynamics,1999,83(1-3):135-145.
[7] Gu,M.and Quan,Y.Across-wind aerodynamic force and aerodynamic damping of typical tall buildings [J]. Journal of Wind Engineering and Industrial Aerodynamics, 2004.92(13):1147-1165.
[8] Tse K T, Hitchcock P A,Kwok K C S,et al.Economic perspectives of aerodynamic treatments of square tall buildings [J].Journal of Wind Engineering and Industrial Aerodynamics,2009,97(9-10):455-467.
[9] Shi B Q, Xie Z N,Ni Z H.Aerodynamic Shape Optimization of Shenzhen Kingkey Financial Tower [J].Applied Mechanics and Materials,2011,71-78:4005-4008.
[10] Kawai H. Effect of corner modifications on aeroelastic instabilities of tall buildings [J]. Journal of wind engineering and industrial aerodynamics,1998,74-76 (98):719-729.
[11] ERCOFTAC Special interest group on “Quality and trust in industrial CFD”, Best practice guidelines [R], Editors: M. Casey, T. Wintergerste, Fluid Dynamics Laboratory, Sulzer Innotec, 2000.1.
[12] Tannehill, J.C., Anderson, D.A., Pletcher R.H. (1997), Computational fluid mechanics and heat transfer (second edition) [M], Taylor & Francis, Washington, D.C., 165-176.
[13] Menter, F. R. (1994), Two-Equation Eddy-Viscosity Turbulence Models for Engineering Applications [J], AIAA Journal, 32, 269-289.
[14] Larsen, A. (1993), Aerodynamic aspects of the final design of the 1624m suspension bridge across the Great Belt [J], J. Wind Eng. Ind. Aerodyn. 48,261-285.
[15] Bruno，L. (2003), The validity of 2D numerical simulations of vertical structures around a bridge deck [J], Mathematical and Computer Modelling, 37,795-828.
[16] 祝志文，陈魏，袁涛，桥梁主梁CFD模拟之基准模型测压试验与气动特性分析[J]，中国公路学报，2016，29(11):49-56.
Zhi-Wen Zhu, Wei Chen, Tao Yuan, Pressure measurement and aerodynamics investigation on benchmark model for bridge girder CFD simulations[J], China Journal of Highway and Transport. 2016，29(11):49-56. (In Chinese)