基于梯度提升决策树模型的冷连轧机颤振研究

PDF(1355 KB)

振动与冲击 ›› 2021, Vol. 40 ›› Issue (13) : 154-158.

论文

周晓敏,郝勇凯,丛文韬,魏志彬,温国栋

作者信息 +

Flutter analysis of cold tandem rolling mills based on gradient boosted decision tree

ZHOU Xiaomin, HAO Yongkai, CONG Wentao, WEI Zhibin, WEN Guodong

Author information +

文章历史 +

摘要

冷连轧生产过程中，由于轧机振动异常可能造成产品质量问题甚至发生断带等影响正常生产，极大限制了生产效率。目前已有钢铁企业实现在线颤振监测，但监测系统只能通过振动报警后再进行降速等方式来抑制振动。针对冷连轧振动难以建立精确的传统机理模型，利用现场实测生产数据，建立梯度提升决策树模型进行振动能量回归，并利用梯度提升决策树算法特性进行特征选择以寻找影响振动的重要因素并进行模型简化。实际生产数据仿真结果表明，通过梯度提升决策树所建模型能够有效选取重要因素、降低模型复杂度，而且建立的回归模型能够准确反映轧制振动能量的变化趋势。

Abstract

In production process of tandem cold rolling, abnormal vibration of rolling mill may cause product quality problems and even strip breakage to greatly limit production efficiency. At present, online flutter monitoring is realized in iron and steel enterprises, but the monitoring system can only suppress vibration through vibration alarm and then speed down. Here, aiming at the difficulty to establish accurate traditional mechanism model for cold rolling vibration, using production data measured on site, the gradient boosted decision tree model was established to perform vibration energy regression. Characteristics of the gradient boosted decision tree algorithm were used to do feature selection, find important factors affecting vibration and simplify the model. The simulation results of actual production data showed that the model established with the gradient boosted decision tree can effectively select important factors, and reduce its complexity; the established regression model can accurately reflect the varying trend of rolling vibration energy.

导出引用

周晓敏,郝勇凯,丛文韬,魏志彬,温国栋. 基于梯度提升决策树模型的冷连轧机颤振研究[J]. 振动与冲击, 2021, 40(13): 154-158

ZHOU Xiaomin, HAO Yongkai, CONG Wentao, WEI Zhibin, WEN Guodong. Flutter analysis of cold tandem rolling mills based on gradient boosted decision tree[J]. Journal of Vibration and Shock, 2021, 40(13): 154-158

参考文献

［1］王芳, 董宏. 轧机垂直振动的研究现状与展望［J］.轧钢, 2008, 25(3): 45-47. 
WANG Fang, DONG Hong. Research situation and prospect of mill vertical vibration［J］. Steel Rolling, 2008, 25(3): 45-47.
［2］YARITA I, FURUKAWAM K, SEINO Y. An analysis of chattering in cold rolling for ultrathin gage strip steel ［J］. Transactions of the Iron and Steel Institute of Japan, 1978, 18(1): 1-12.
［3］TLUSTY J, CHANDRA G, CRITCHLEY S, et al. Chatter in cold rolling ［J］. CIRP Annals—Manufacturing Technology,1982,31(1):195-199.
［4］TAMIYA T, FURUI K, LIDA H. Analysis of chattering phenomenon in cold rolling［C］∥Proceedings of Science and Technology of Flat Rolled Products. Tokyo: International Conference on Steel Rolling, 1980.
［5］NIZIOL J, SWIATONIOWSKI A. Numerical analysis of the vertical vibrations of rolling mills and their negative effect on the sheet quality ［J］. Journal of Materials Processing Technology, 2005,162:546-550.
［6］曾令强, 臧勇, 郜志英，等.轧机整体耦合建模问题研究［J］. 机械工程学报, 2015, 51(14): 46-53.
ZENG Lingqiang, ZANG Yong, GAO Zhiying, et al. Study on overall coupled modeling of the rolling mill ［J］.Journal of Mechanical Engineering,2015,51(14):46-53.
［7］BAR A, SWIATONIOWSKI A. Parametrical excitement vibration in tandem mills:mathematical model and its analysis［J］.Journal of Materials Processing Technology, 2003,134(2):214-224. 
［8］HU P H, EHMANN K F. A dynamic model of the rolling process. Part I: homogeneous model［J］. International Journal of Machine Tools & Manufacture, 2000,40(1): 1-19.
［9］HEIDARI A, FOROUZAN M R, AKBARZADEH S. Development of a rolling chatter model considering unsteady lubrication ［J］. ISIJ International，2014，54(1): 165-170. 
［10］HU P H,ZHAO H Y,EHMANN K F.Third-octave- mode chatter in rolling, Part 3: stability of a multistand mill［J］. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture,2006,220(8):1293-1303.
［11］彭艳，张明，刘宣亮，等.基于数据驱动的轧机振动预测研究［C］∥第十一届中国钢铁年会.北京,2017. 
［12］杨旭, 彭开香, 罗浩,等. 基于EEMD和SVM的冷轧机垂直振动相关故障的诊断［J］. 上海交通大学学报, 2015, 49(6): 751-756.
YANG Xu,PENG Kaixiang,LUO Hao,et al.Vibration-related fault diagnosis in cold rolling mill by using EEMD and SVM［J］. Journal of Shanghai Jiao Tong University, 2015, 49(6):751-756.
［13］徐忠兰, 梁胜龙. 辊缝摩擦因数对轧机垂直振动的影响［J］. 锻压技术, 2015, 40(12):67-70. 
XU Zhonglan,LANG Shenglong.Influences of roll gap friction coefficient on rolling mill vertical vibration［J］. Forging and Stamping Technology, 2015, 40(12):67-70.
［14］BIZARD A, MAYRHOFER K, KEINTZEL G, et al. Chatter Block-Siemens VAI’s solutions for vibration detection, prediction, analysis and control ［C］∥The Iron & Steel Technology Conference and Exposition 2013. Pittsburgh, PA: AIST, 2013.
［15］FRIEDMAN J H. Greedy function approximation: a gradient boosting machine［J］. The Annals of Statistics, 2001, 29(5):1189-1232.
［16］FRIEDMAN J H. Stochastic gradient boosting［J］. Computational Statistics & Data Analysis, 2002, 38(4):367-378.