为解决装配式框架节点与连接的抗震能力不足、震损后难修复等问题，提出一种新型装配式耗能减震节点连接，对其关键耗能减震部件-可更换削弱型约束钢板阻尼器进行低周往复加载试验，考察其承载能力、耗能能力、刚度退化与延性等滞回性能，揭示阻尼器的失效破坏机制，分析开孔削弱形式、削弱长度、钢板厚度以及约束套筒与削弱钢板的间隙等对阻尼器力学性能的影响。结果表明：可更换削弱型约束钢板阻尼器在削弱截面部位开裂或断裂，实现了阻尼器的塑性耗能与失效模式可控，具备良好的承载-耗能双重功能。在相同参数条件下狗骨削弱型约束钢板阻尼器的承载能力、耗能能力与延性性能优于竖缝开孔削弱型约束钢板阻尼器。削弱长度对延性与钢板侧向屈曲性能影响较大，钢板厚度对承载能力与刚度退化性能影响较大，而约束套筒与钢板间隙较大时，约束套筒不能有效发挥作用，易导致削弱钢板发生受压屈曲。
Abstract
Here, in order to solve problems of insufficient aseismic capacity and difficult to repair after earthquake damage of prefabricated frame joints and connections, a new type of prefabricated energy dissipation joint connection was proposed. Low-cycle repeated loading tests were conducted for its key energy dissipation component called the replaceable weakened restrained steel-plate damper to investigate its hysteretic performances of load-bearing capacity, energy dissipation capacity, stiffness degradation and ductility, reveal its failure mechanism, and analyze effects of slot-opened weakening form, weakening length, steel plate thickness and gap between restraint sleeve and weakened steel plate on mechanical properties of the damper. The results showed that the replaceable weakened restrained steel plate damper cracks or breaks at the position of weakened section to realize controllable plastic energy dissipation and damper failure mode, and have good dual-function of load-bearing and energy dissipation; under the same parameters, load-bearing capacity, energy dissipation capacity and ductility of dog bone weakened restrained steel plate damper are better than those of vertical slot-opened weakened restrained steel plate damper; weakening length has a larger effect on ductility and lateral buckling performance of steel plate, steel plate thickness has a larger effect on load-bearing capacity and stiffness degradation performance; when gap between restraint sleeve and steel plate is larger, restraint sleeve can’t have effective action to cause the compression buckling of weakened steel plate.
关键词
装配式耗能减震节点 /
削弱型约束钢板阻尼器 /
承载-耗能双重功能 /
滞回性能 /
往复加载试验
{{custom_keyword}} /
Key words
prefabricated energy-dissipation joint /
weakened constrained steel-plate damper /
dual functions of load-bearing and energy-dissipating /
hysteretic performance /
repeated loading test
{{custom_keyword}} /
{{custom_sec.title}}
{{custom_sec.title}}
{{custom_sec.content}}
参考文献
［1］吴刚,冯德成. 装配式混凝土框架节点基本性能研究进展［J］. 建筑结构学报, 2018, 39(2):1-16.
WU Gang, FENG Decheng. Research progress on fundamental performance of precast concrete frame beam-to-column connections ［J］. Journal of Building Structures, 2018, 39(2):1-16.
［2］周德恒,李爱群,贾洪,等.制钢筋混凝土框架结构抗震性能研究进展(Ⅰ)——节点性能研究［J］.工业建筑,2014,44(6):95-100.
ZHOU Deheng, LI Aiqun, JIA Hong, et al. Progress of investigation on seismic behavior of precast concrete frame structures (Ⅰ): study of joint property ［J］. Industrial Construction, 2014, 44(6): 95-100.
［3］康婷,许高娲,欧进萍.承载-耗能铰节点装配式钢框架结构抗震弹塑性分析［J］.地震工程与工程振动,2018,38(6):43-51.
KANG Ting, XU Gaowa, OU Jinping. Elasto-plastic analysis of prefabricated steel frame with bearing-energy dissipated joints against earthquake ［J］. Earthquake Engineering and Engineering Dynamics, 2018, 38(6):43-51.
［4］李祚华,彭志涵,齐一鹤，等. 装配式RC梁柱塑性可控钢质节点抗震性能足尺试验研究［J］.建筑结构学报,2019，40(10):43-50.
LI Zuohua, PENG Zhihan, QI Yihe, et al. Full-scale experimental study on seismic behaviors of plasticity controllable steel joint of prefabricated RC beam column ［J］. Journal of Building Structures, 2019, 40(10):43-50.
［5］韩春,李青宁,姜维山，等.装配式预应力混凝土梁与高强钢筋约束混凝土柱连接节点抗震性能试验研究［J］.振动与冲击,2017,36(1):248-254.
HAN Chun, LI Qingning, JIANG Weishan, et al. Tests for aseismic behavior of prestressed fabricated precast concrete beam-column joints subjected to cyclic loading ［J］. Journal of Vibration and Shock, 2017, 36(1):248-254.
［6］杨松森,王燕,马强强.装配式外套筒-加强式外伸端板组件梁柱连接节点抗震性能试验研究［J］.土木工程学报,2017,50(11):76-86.
YANG Songsen, WAN Yan, MA Qiangqiang. Experimental study on seismic behavior of prefabricated outer sleeve-overhang plate joint between column and beam ［J］. China Civil Engineering Journal, 2017, 50(11):76-86.
［7］吴从晓,赖伟山,周云，等.新型预制装配式消能减震混凝土框架节点抗震性能试验研究［J］.土木工程学报,2015,48(9):23-30.
WU Congxiao, LAI Weishan, ZHOU Yun, et al. Experimental study on seismic behaviors of new energy-dissipative prefabricated concrete frame structure joints ［J］. China Civil Engineering Journal, 2015,48(9):23-30.
［8］杨曌,吕伟,包亮. 基于螺栓连接的新型钢筋混凝土框架装配式节点抗震性能研究［J］.工业建筑,2019,49(8):93-99.
YANG Zhao, L Wei, BAO Liang. Experimental research on seismic behavior of new RC frame assembly joints based on bolted connection ［J］. Industrial Construction, 2019, 49(8): 93-99.
［9］HOSSEIN P, IMAN H, REZA R. A new ductile moment-resisting connection for precast concrete frames in seismic regions: An experimental investigation ［J］. Engineering Structures, 2014, 70:174-157.
［10］MARCO B, SANTINO G, MAURO T, et al. Beam-column joints
in continuous RC frames:comparison between cast-in-situ and precast solutions ［J］. Engineering Structures, 2016, 127:129-144.
［11］NZABONIMPA J D, HONG W K, KIM J. Experimental and non-linear numerical investigation of the novel detachable mechanical joints with laminated plates for composite precast beam-column joint ［J］. Composite Structures, 2018, 185: 286-303.
［12］FATHI M, PARVIZI M, KARIMI J, et al. Experimental and numerical study of a proposed moment-resisting connection for precast concrete frames ［J］. Scientia Iranica, 2018, 25(4): 1977-1986.
［13］ANINTHANENI P K, DHAKAL R P, MARSHALL J, et al. Nonlinear cyclic behavior of precast concrete frame sub-assemblies with “Dry” end plate connection ［J］. Structures, 2018, 14:124-136.
［14］GHAYEB H H, RAZAK H A, SULONG N H R. Development and testing of hybrid precast concrete beam-to-column connections under cyclic loading ［J］. Construction and Building Materials, 2017, 151:258-278.
［15］李国强,孙飞飞,陈素文，等.大吨位国产TJⅡ型屈曲约束支撑的研制与试验研究［J］.建筑钢结构进展,2009,11(4):22-26.
LI Guoqiang, SUN Feifei, CHEN Suwen, et al. Development and experimental study of large-tonnage domestic TJⅡbuckling-restrained brace ［J］. Progress in Construction Steel Structures, 2009, 11(4): 22-26.
{{custom_fnGroup.title_cn}}
脚注
{{custom_fn.content}}
PDF(3030 KB)
